the only thing that's gonna happen is drinking of beer.
|
Originally Posted by Erat
(Post 1040779)
I know if i hype it up, everything will fall flat on it's face. But f it.
This weekend is shaping up to be a big weekend as far as this car goes. Maybe even mine too. This just showed up in the mail, maybe i'll do something with it. Owner didn't want the fancy polished stuff. :( https://www.miataturbo.net/attachmen...ine=1375827622 |
2 Attachment(s)
Got the welding table up and operational.
https://www.miataturbo.net/attachmen...ine=1376158601 This is what i'm after as far as the manifold goes. Just need to figure out how i'm going to cut it. A tube notcher + drill press would be awesome right now. But the owner of the car never brought me a drill press. https://www.miataturbo.net/attachmen...ine=1376158601 |
1 Attachment(s)
Got this far.
https://www.miataturbo.net/attachmen...ine=1376183698 Evaluating what / how i'm going to go about the rest of it. This 16g turbo is laid out extremely weird making it difficult to mount on the manifold and have an easy downpipe. |
32 Attachment(s)
After figuring out where this turbo needed to be as far as making the downpipe and fitment somewhat easy. I decided to offset it.
Silly build techniques ahead* Erat knows how to weld? https://www.miataturbo.net/attachmen...ine=1376263783 Nope. Who needs a hole saw when you have a plasma cutter? https://www.miataturbo.net/attachmen...ine=1376263783 https://www.miataturbo.net/attachmen...ine=1376263783 Shooting out the runner blasting me in the face haha. https://www.miataturbo.net/attachmen...ine=1376263783 Need to buy a REAL carbide burr. Not this harbor freight trash. https://www.miataturbo.net/attachmen...ine=1376263783 The middle runners will be fused on once i can port out and smooth the holes a little better. https://www.miataturbo.net/attachmen...ine=1376263783 https://www.miataturbo.net/attachmen...ine=1376263783 You may be asking, "why did you weld 2 pieces of straight pipe you dumb noob?" Well, the turbo is going to sit offset (not in the middle)(if you couldn't tell by the 45* runner) and i didn't want to drill a hole for the flange in the middle of a weld. I need to buy some exhaust hanger, gussets(probably totally not needed but why not), and some pipe to put the turbo flange on. Some of the smallest things take the longest to do. Hooked the megasquirt up, GOT POWER! Whooh. Seems to be getting fuel, and spark, but we didn't want to pull a "http://youtu.be/2RBRCaVjYrM". So it didn't crank with the manifold off... Much. We were drinking, what fun would any of this be sober? Also, props for MT shirt?? https://www.miataturbo.net/attachmen...ine=1376263783 |
5 Attachment(s)
Made a bunch more progress on the car. Aside from a midpipe, its almost ready to start up. Sadly, we've gotten lazy with documenting.
But i have some manifold pictures. https://www.miataturbo.net/attachmen...ine=1377394113 https://www.miataturbo.net/attachmen...ine=1377394113 https://www.miataturbo.net/attachmen...ine=1377394113 Rough port, carbide burr is pretty much toasted... https://www.miataturbo.net/attachmen...ine=1377394113 Inside welded and blended in. Probably go back and get it nicely with the stone bit. https://www.miataturbo.net/attachmen...ine=1377394113 Routed the IC piping, got the cooling hoses hooked up, clocked the CHRA, got hardware, oil drain. ect. Also: The correct size fitting to match up to it is a M10 x 1.5. Based on previous issues locating a correct fitting, you'll want to source a M10 x 1.5 to -3AN fitting. |
5 Attachment(s)
double post
|
2 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1377451857
https://www.miataturbo.net/attachmen...ine=1377451857 Got a bunch more done. Little things like putting bungs on, oh you know, oil supply is proving to take the longest. |
4 Attachment(s)
I don't feel like writing anything. It's not done yet, but it starts. yay
Pictures, and video should suffice. https://www.miataturbo.net/attachmen...ine=1377462806 https://www.miataturbo.net/attachmen...ine=1377462806 http://i25.photobucket.com/albums/c9...a/GOPR3744.jpg I'm actually drinking my first beer all weekend now... Not sure how i managed without. |
7 Attachment(s)
Made a midpipe.
https://www.miataturbo.net/attachmen...ine=1378524463 https://www.miataturbo.net/attachmen...ine=1378524463 https://www.miataturbo.net/attachmen...ine=1378524463 304 flange to 316 pipe with 308 https://www.miataturbo.net/attachmen...ine=1378524463 https://www.miataturbo.net/attachmen...ine=1378524463 Back on the ground, it's been a while. https://www.miataturbo.net/attachmen...ine=1378524463 For the most part, it's done hardware wise. Still gotta make a heat shield and source some heat tape. But we are going to try and get my car going too, tomorrow. https://www.miataturbo.net/attachmen...ine=1378524463 Spent about 3 minutes tuning, the wideband is working now which is nice. But the IAT sensor is not. For what little i did, i could get it to idle pretty smoothly. |
5 Attachment(s)
Car runs and builds boost. Spent about 3 hours or so today tuning it. Just running on wastegate pressure for now 8psi. Every time it gets a ton of boost it blows a coupler off, so we have to mend that. But so far it's pretty good. Idle and warmup still needs a bit of tuning, but that takes a while.
I have attached the datalog of the 3rd gear pull, and tune if anyone cares. Heres what VD shows of that pull. https://www.miataturbo.net/attachmen...ine=1378599119 IMO. Not to bad on a budget DIY setup with a free 16g turbo and 3 hours of tuning time. Feel free to give me some criticism. May drive the car back to Lansing to it's home tomorrow. |
Originally Posted by Erat
(Post 1034505)
I go through all of this, and only found $0.40. What the serious fuck Florida? The driver side better produce.
|
2 Attachment(s)
This car retains the title of second slowest miata ever.
Because it's faster than mine. That's right folks, pulls on me from a 55 roll. This is 10psi, but it's since been turned up to 12. Didn't get a log of that yet because it developed a bit of a rattle. But this log is a bit more accurate as the weight was adjusted. https://www.miataturbo.net/attachmen...ine=1379206017 https://www.miataturbo.net/attachmen...ine=1379206017 |
Oh, the shame! Kidding man, looks sick. Get some videos of a pull or two, i'd love to see them.
Loved the manifold build pics too. GJ sir. |
You can see in the picture above the gopro was pointed at me. But he hit the start button, it was on the picture setting, not the video setting.
We may go back out tomorrow and get some footage. |
|
got a bit of a kink at the tip.
|
Nice build!
|
In my opinion. This is the build thread to loosely follow if you want to do the following things.
a) NA8 turbo swap an NA6 car b) Drink many beers 3) Be on a huge budget, but still have fun IX) Make something that will last Somehow this car still works, without any failures. Pretty sure it will be sold to a new owner in the springtime. Hell i still have parts that were supposed to go on this car at my house. |
Just bought the turbo kit from this car off of a guy. It's in decent shape except for a few cracks in the manifold that can be easily fixed. I'm excited to give it new life! Cheers!
|
All times are GMT -4. The time now is 12:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands