95 build for boost
1 Attachment(s)
shooting for 280hp
specs for the build BOTTEM END 95 block bored for 84mm Reman'd crank belfab H-beam rods Supertech pistons (84mm) NDC bearings Arp heads studs Arp main studs Billet oil pump gear TOP END 99 reman'd head stock cams fm valve spring/retainers 99 intake TURBO STUFF Holset HX30w (rebuilt) Begi T3 manifold Begi intercooler (old design) ebay 2inch intercooler pipes cxracing BOV adjustable wastegate (hx30w stock) An fittings for oil lines FM lower downpipe section Racing beat power pulse cat-back Testpipe (No cat) DRIVETRAIN FM stage 1 clutch Zoom 9lbs. aluminum flywheel 95 5spd tranny 4.10 open diff BRAINS Megasquirt PnP (95) LC1 FD Rx7 alternator COOLING Koyo Rad Silicon hoses M-tuned Modified Re-route FUEL FM dual feed fuel rail fc3s Rx7 550cc injectors Stock fuel pump WHEELS/BRAKES RPF1 (15inch) Zeix 912s (205s) Attachment 200212 |
280whp should be fairly easy with that mod list. good stuff
|
11 Attachment(s)
|
The more pictures you add the more I like this thread:)
Keep at it |
10 Attachment(s)
|
2 Attachment(s)
some stuff has already been on the car so its alittle dirty but everything should clean up nicely, heres what my engine bay looked like In N/A form.
Attachment 200189 Attachment 200190 I promise you she will be Look show quality when Im done with her |
Those 84mm bump you up to a 188- displacement. So its kinda like a 1.9 right?
|
Not sure on the displacement side of things, I didn't think it would raise it that much tho, anyone have a displacement calculator handy to check on this?
|
Wow, top notch parts.
|
I'm absolutely LOVING those enkeis
|
What dash kit are you using to mount the gauges?
|
looks like it will be a good build :D
|
Gauge kit came from moss motors
Mazda Miata Parts & Accessories at MiataMania.com thanks for all the compliments everyone. |
Good deal so far, keep up the good work.
|
Likin this here thread, progress is good!
|
4 Attachment(s)
picked up the block today, installed pistons to rods, and plugged the front water outlet.
Attachment 199992 Attachment 199993 Attachment 199994 Attachment 199995 my coolant reroute should be epic, I'm going to buy the M-tuned billet rear housing. keeping the factory front water neck, and using and mx6 v6 water outlet. |
Paint your block silver so you can see leaks. Its helped me find manifold leaks, water leaks, fuel leaks, and oil in a couple places. The metallic silver looks cool and shows leaks before they become a problem.
|
Originally Posted by fc3s690
(Post 525629)
Not sure on the displacement side of things, I didn't think it would raise it that much tho, anyone have a displacement calculator handy to check on this?
Code:
Bore Stroke Displacement |
I likes
|
7 Attachment(s)
finished the long block the other day, next is making the coolant reroute.
Attachment 199521 Attachment 199522 Attachment 199523 Attachment 199524 Attachment 199525 Attachment 199526 Attachment 199527 |
All times are GMT -4. The time now is 11:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands