In Which I Build A Street Car
07-18-2017, 04:15 PM
#1
In Which I Build A Street Car
There will be no formal format for this thread. You all can deal with it.
Car in question is a 99.
I already bought tires. 205/50-15 VR1s. Does ANYONE have pictures of the 15x8.5 Hypergrams wearing either a 205/50 or 225/45 on an NB WITHOUT rolled fenders?
Car is nice, would like to avoid a roll. Tires are wide, 8.5" width is appropriate. Hypergrams are pretty, me gusta. Car has Xidas. Have camber, will travel.
205/50 VR1 unmounted vs 225/45 RS4 mounted on 15x9.
205/50 VR1 unmounted vs 225/45 RS4 mounted on 15x9 by concealer404, on Flickr
Also: Bought TRS H1 HID retrofit. Because street car.
TRS H1 mini retrofit by concealer404, on Flickr
Car in question is a 99.
I already bought tires. 205/50-15 VR1s. Does ANYONE have pictures of the 15x8.5 Hypergrams wearing either a 205/50 or 225/45 on an NB WITHOUT rolled fenders?
Car is nice, would like to avoid a roll. Tires are wide, 8.5" width is appropriate. Hypergrams are pretty, me gusta. Car has Xidas. Have camber, will travel.
205/50 VR1 unmounted vs 225/45 RS4 mounted on 15x9.
205/50 VR1 unmounted vs 225/45 RS4 mounted on 15x9 by concealer404, on Flickr
Also: Bought TRS H1 HID retrofit. Because street car.
TRS H1 mini retrofit by concealer404, on Flickr
Last edited by concealer404; 07-21-2017 at 11:52 AM.
Reply
0
0
07-18-2017, 04:36 PM
#2
This page can’t be displayed
•Make sure the web address https://flic.kr is correct.
•Look for the page with your search engine.
•Refresh the page in a few minutes.
•Make sure the web address https://flic.kr is correct.
•Look for the page with your search engine.
•Refresh the page in a few minutes.
Reply
0
0
07-18-2017, 04:38 PM
#3
Hrm. Do they work in my other build thread?
This was the direct short link to the photos in my Flickr page. If i use the actual BBCode link, it ends up double posting everything in here because this site's coding is hot trash and seems to have a Flickr-specific plugin that only serves to make me irate that i have to post things differently here than ANYWHERE ELSE on the entire internet.
This was the direct short link to the photos in my Flickr page. If i use the actual BBCode link, it ends up double posting everything in here because this site's coding is hot trash and seems to have a Flickr-specific plugin that only serves to make me irate that i have to post things differently here than ANYWHERE ELSE on the entire internet.
Reply
0
0
07-22-2017, 12:19 PM
#5
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Nobody owns Hypergrams you weirdo, we're all god fearing 6ul loving folk here.
I've been running 225/45 RS3 on x9 on my NB for years with no need for a roll, and fwiw this is fairly common. Are your bastard rims like 0 offset or something? I don't understand why you think there will be an issue.
I've been running 225/45 RS3 on x9 on my NB for years with no need for a roll, and fwiw this is fairly common. Are your bastard rims like 0 offset or something? I don't understand why you think there will be an issue.
Reply
0
0
07-27-2017, 02:30 PM
#10
My "race car" is hellapoked and it's beyond disgusting.
15x10s do not fit under anything resembling stock body no matter what anyone says.
All i'm looking for is the "fitment" of the old 15x9 +36 225/45 setup on Hater. Just with 205/50 tires, without gross stretch. Shouldn't be hard.
15x10s do not fit under anything resembling stock body no matter what anyone says.
All i'm looking for is the "fitment" of the old 15x9 +36 225/45 setup on Hater. Just with 205/50 tires, without gross stretch. Shouldn't be hard.
Reply
0
0
07-27-2017, 02:41 PM
#11
I can comment that a 15x8 +0 with a 205 v720 up to the bumpstops, no rub even nearing full lock, fits under stock NA body, just have to actually know how to use a roller and be patient. Very patient. With good...forearm strength.
That is about *** herrafrush as it gets. Like, bordering on poke, settle for a +25, on a NB can maybe get away without a roll. It'll be tight..real tight.
That is about *** herrafrush as it gets. Like, bordering on poke, settle for a +25, on a NB can maybe get away without a roll. It'll be tight..real tight.
Reply
0
0
08-10-2017, 01:23 PM
#17
I'm putting a WTB in my own build thread because i can.
1) 99-00 Miata Jay D Em BP5A ecu
2) 1.125 or 1.25" Racing Beat front sway bar
3) MSM rear sway bar
4) Stainless brake lines (rears only are fine)
5) Black 99-00 Door panels
6) 90-93 black carpets
7) 01-05 tail lights WITH pigtails
8) 03-05 "Sport brake" front dust shields
9) Racing Beat header
10) Racing Beat Power Pulse or equivalent "nice" axle back
11) K&N intake
12) Skunk2 throttle body
13) Welded steering rack pinion
14) Miataroadster Delrin diff bushings
15) Miataroadster Delrin or V8R aluminum rack bushings
16) 01-05 black center/shift console (a nice 99-00 would be ok as well)
17) stock injectors
1) 99-00 Miata Jay D Em BP5A ecu
2) 1.125 or 1.25" Racing Beat front sway bar
3) MSM rear sway bar
4) Stainless brake lines (rears only are fine)
5) Black 99-00 Door panels
6) 90-93 black carpets
7) 01-05 tail lights WITH pigtails
8) 03-05 "Sport brake" front dust shields
9) Racing Beat header
10) Racing Beat Power Pulse or equivalent "nice" axle back
11) K&N intake
12) Skunk2 throttle body
13) Welded steering rack pinion
14) Miataroadster Delrin diff bushings
15) Miataroadster Delrin or V8R aluminum rack bushings
16) 01-05 black center/shift console (a nice 99-00 would be ok as well)
17) stock injectors
Reply
0
0
