Aidan's loose oily bunghole actually runs a track lap
#3601
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Hmmm, tempting. I need to get all my sensors into the megasquirt. You use the ADC inputs right? I want oil temp, pressure, etc.</p><p>You have all your sensors wired to the megasquirt Ian right?</p>
#3604
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Found what I wanted to use.</p><p>TinyIOx v1.0 Board</p><p>Yep, thats the one. I need to rewire my megasquirt though to get my connector out of the case and make more room in there.</p><p>Anyone have a spare MS3+MS3x case I could have?</p>
Last edited by aidandj; 09-04-2015 at 05:48 PM.
#3605
Theoretically I can repurpose the main EGO input because I'm using Reverant's serial-to-CANbus converter box instead of the analog signal from the LC2, but the software in the MS3 doesn't seem to allow that, so I'll have to hack the code if I want that one.
I don't have oil pressure or oil temp in my MS3, though, I haven't seen the need.
--Ian
#3607
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Doing a clutch job on a friends miata, made a impact proof u-joint.</p><p><a href="http://imgur.com/ZUitZ8k" target="_blank"><img alt="" src="https://i.imgur.com/ZUitZ8kl.jpg" /></a></p><p>Also got a new mirror finally.</p><p><a href="http://imgur.com/c1ZiHfh" target="_blank"><img alt="" src="https://i.imgur.com/c1ZiHfhl.jpg" /></a><a href="http://imgur.com/PsJ9OtP" target="_blank"><img alt="" src="https://i.imgur.com/PsJ9OtPl.jpg" /></a></p>
#3609
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Off with the ugly</p><p><a href="http://imgur.com/pTnssMl" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148749&dateline=14 41479397" /></a></p><p>Do some ducting</p><p><a href="http://imgur.com/8QzbL2o" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148750&dateline=14 41479397" /></a></p><p>Test fit</p><p><a href="http://imgur.com/bAib3Y2" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148748&dateline=14 41479397" /></a></p><p>Put it on</p><p><a href="http://imgur.com/FxQeieg" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148746&dateline=14 41479397" /></a></p><p>Put it on</p><p><a href="http://imgur.com/VBsdxb0" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148742&dateline=14 41479397" /></a></p><p>Laugh at how bad your hood paint is<br /><br /><a href="http://imgur.com/ngMcCm2" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148743&dateline=14 41479397" /></a><br /><br />tada<br /> </p><p><a href="http://imgur.com/0kDtvWI" target="_blank"><img alt="" src="https://www.miataturbo.net/attachment.php?attachmentid=148741&dateline=14 41479397" /></a></p><p> </p>
#3611
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Welded on v-bands for easy removal of bumper.</p><p> </p><p> </p><p> </p><p> </p><p>Naw, i rewelded my intercooler mounting bar. But its aluminum, and dirty, and the welds are so ugly I'm not going to post them.</p>
#3619
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
There will be a explanation in my build
pretty sure diff is open, but it is 1.8.
Going to look at the car here in a minute and finalize things
Sucks its an auto, but whole car is only $500 so....
pretty sure diff is open, but it is 1.8.
Going to look at the car here in a minute and finalize things
Sucks its an auto, but whole car is only $500 so....