aidandj

iTrader: (5)

<p>I'm pretty scared about breaking this 1000 dollar torsen. I'm still not sure what my plan is, I might find a 4.1 for cheap somewhere.</p><p>I don't need a drag miata. I decided today that I want to buy a short bus and put a turbo LS in it New future drag car.</p>

EO2K

iTrader: (37)

Now THIS is something I can get behind

aidandj

iTrader: (5)

<p>I have all these great ideas, and no space to do them. Or money, or time.&nbsp;</p>

deezums

iTrader: (3)

Why scared of torsen? Stay away from the strip and I'd bet you'll be fine.

You are still on stock rubber bottoms right? Those crown looking things? Wouldn't that let the diff bounce off those peaks like a mother?

I <3 so much my torsen and poly mounts, sometimes hard to tell it's loose, but I'm on panzy nitto neo-gens.

aidandj

iTrader: (5)

<p></p><p>Not an optimal solution</p><p></p><p>Yes, but a cheap easy delrin solution doesn't exist for those. I might need to make my own. And The delrin upper mounts should do something though. I also think that my control arms are flexing too. Im going to launch easy from now on at the drag strip but I don't want that to be a permanent thing.</p><p></p><p>And not on a sticky drag strip. I seriously doubt I could kill a torsen on the street.</p>

hi_im_sean

iTrader: (3)

<br />
<br /><br />
<br />
<br />That is fuking disgusting

aidandj

iTrader: (5)

<p>Not when it runs 8's.</p><p>Fastest turbo miata</p>

deezums

iTrader: (3)

I'll take one of whatever this has, plus some coolant.

aidandj

iTrader: (5)

<p>Even faster:</p><p>&nbsp;</p><p></p>

stoves

iTrader: (1)

miataroadster sells a complete delrin diff bushing kit that has the "tophats", lowers, and the new plate for the bottom. I put these on my car in conjunction with the AWR/goodwin/supermiata metal/poly engine mounts and both wheel hop and my jumping shifter have been completely eradicated.


MiataRoadster Delrin solid differential mounts kit - MiataRoadster - High-performance customer service...and parts for Roadsters

The problem is, they ain't cheap.

hi_im_sean

iTrader: (3)

don't give a **** what time slip it has, it's blasphemy.<br /><br />I'm going to do diff mounts sometime this summer if you want me to make an extra set for you...

turbofan

iTrader: (1)

The problem isn't just that all those mounts are expensive... It's that it turns your whole car into a giant *****.

hornetball

iTrader: (4)

That's a problem?

aidandj

iTrader: (5)

<p>Yeah, not seeing a problem with that... </p><p>Sean, yes please. I only need the lower part, already have the upper. Or tell me how you do it and I can try on the lathe, I'd rather learn how.</p><p>I actually bought some AWR mounts, then realized that 1.6 and 1.8 mounts were different. So not wasting money on 1.6 mounths.</p>

hi_im_sean

iTrader: (3)

<p></p><p>&nbsp;</p><p>ive never really looked at them the one time i had it apart, but isnt it as simple as burning the rubber off the lower metal piece, and turning something to fill the gap?</p>

turbofan

iTrader: (1)

I could always lend you my energy suspension poly one, and you can measure it and copy it in delrin.

aidandj

iTrader: (5)

^^^lets do that. Sean I'll take measurements and if I can't turn it I'll bug you. I have some left over acetal I'll turn you a set if I can figure out how to do the radius. Might try aluminum too.

hi_im_sean

iTrader: (3)

<p>cool let me know</p>

hi_im_sean

iTrader: (3)

<p>btw, install the dam sphericals already would ya</p>

concealer404

iTrader: (3)

No they don't. You're thinking motor mounts.

FM has solid metal mounts for $50 less than the MR delrin mounts as well. $100 is a decent price.