Aidan's loose oily bunghole actually runs a track lap
#2142
Reverse is directly to the right of 6th. So from 6th, go up, right, back.
For rear mains, I always clean the metal surface, clean it with brake parts cleaner, final clean it, air dry 10 min, then light rtv on outer edge of seal and inner metal edge, and press in by fingers/thumbs. Never had a front/main/cam seal leak doing this.
For rear mains, I always clean the metal surface, clean it with brake parts cleaner, final clean it, air dry 10 min, then light rtv on outer edge of seal and inner metal edge, and press in by fingers/thumbs. Never had a front/main/cam seal leak doing this.
#2144
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Bought some 15 dollar brake pads today. Rotors come in tomorrow.
<br />List before thunderhill:
<br />1. Rear Main
<br />2. Install trans
<br />3. Fill with fluid
<br />4. Paint brackets.
<br />5. New rotors+pads
<br />6. Oil change
<br />7. Maybe order delrin shifter bushing.
<br />List before thunderhill:
<br />1. Rear Main
<br />2. Install trans
<br />3. Fill with fluid
<br />4. Paint brackets.
<br />5. New rotors+pads
<br />6. Oil change
<br />7. Maybe order delrin shifter bushing.
#2145
Bought some 15 dollar brake pads today. Rotors come in tomorrow.
<br />List before thunderhill:
<br />1. Rear Main
<br />2. Install trans
<br />3. Fill with fluid
<br />4. Paint brackets.
<br />5. New rotors+pads
<br />6. Oil change
<br />7. Maybe order delrin shifter bushing.
<br />List before thunderhill:
<br />1. Rear Main
<br />2. Install trans
<br />3. Fill with fluid
<br />4. Paint brackets.
<br />5. New rotors+pads
<br />6. Oil change
<br />7. Maybe order delrin shifter bushing.
#2151
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Just realized my diff leak might be from the breather. I filled it on the floor. Would explain why it only leaks when hot, and why it seems to be everywhere.
#2153
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I will tonight once its up on stands. Last time I did that and left it overnight I got nothing. Which is why it kinda makes sense.
<br />Not lying on its back. Just sitting flat like it would in the car.
<br />Not lying on its back. Just sitting flat like it would in the car.
#2157
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Awesome. The trans breather was a bitch to get out. I had to destroy my old extension housing lol. I was scared for a second.
<br />More info on extension housing swap will come soon. It was straightforward but I took a whole buttload of pictures.
<br />More info on extension housing swap will come soon. It was straightforward but I took a whole buttload of pictures.