hi_im_sean

iTrader: (3)

It mixes itself inside the trans

aidandj

iTrader: (5)

<p></p><p>Shut up, you know what I meant . 1 quart of each? Going to power dial concealer until he adds a quart to my order.</p>

ofspunk7

I used 1qt of the syncromesh and the rest the AMSoil tranny fluid.

aidandj

iTrader: (5)

<p>Back to arca_ex question, how come you can mix the 5w-30 and 75w-90</p>

ofspunk7

It's easy. I follow the advice of a very knowledgeable person, since I am not expert on the subject matter. It has worked well for our applications. Sorry, that is all the SCIENCE I can provide on the matter.

aidandj

iTrader: (5)

<p>Hmmm, I need more science.</p>

ofspunk7

Browsing what the Google Scientists have posted on the interwebs, I do see quite a few posts about this mixture on multiple car platforms. Not that this really means anything, but there is some reading that can be done.

aidandj

iTrader: (5)

<p>I'm going to order a quart. And go from there. If it doesn't show up before the weekend then i definitely wont be running it.</p>

sixshooter

iTrader: (12)

Because diff/trans oil is measured by a different scale than engine oil. 80w trans oil and 80w engine oil are not the same thickness. Sounds odd but it is true because engineers.

M.Adamovits

They're not too far off.

sixshooter

iTrader: (12)

I don't want to hear anyone complaining about their transmission not working well with this fluid or that fluid when they get hot and you don't have any heat shields around the exhaust. Even the factory shields the transmission from the exhaust at 100ish horsepower. Double or triple that and you are making 2 or 3 times the heat.
Wouldn't it be 2 or 3 times more important to shield it?


Y'all don't hear me.
/Andre3000

aidandj

iTrader: (5)

<p>Picture of said heat shield?</p>

hi_im_sean

iTrader: (3)

I understand aarons sentiment, but automatics running water for fluid go 100s of 1000s without gear wear issues. Not that that proves anything, but it's good enough for me.

patsmx5

iTrader: (16)

https://www.miataturbo.net/general-m...-thread-86007/

aidandj

iTrader: (5)

<p>Thanks pat.</p><p>Sean, do you remember the thread pitch for the intercooler mounting bosses? I want to order some rubber insulating thingies from mcmaster.</p>

hi_im_sean

iTrader: (3)

M8x1.25

aidandj

iTrader: (5)

<p>Hmmm, i thought they were SAE for some reason.</p>

aidandj

iTrader: (5)

<p>Going to buy 3 of these&nbsp;its something I've been meaning to do forever and keep holding off.</p>

aidandj

iTrader: (5)

<p>Ordered. I'm blaming you if they don't fit sean.</p>

hi_im_sean

iTrader: (3)

This is the internet, I cant be wrong.