Miata Turbo Forum - Boost cars, acquire cats.

Build Threads Building a motor? Post the progress here.

Aidan's loose oily bunghole actually runs a track lap

Thread Tools
 
Search this Thread
 
Old 02-06-2016, 04:39 PM
  #6181  
Elite Member
 
codrus's Avatar
 
Join Date: Mar 2007
Location: Santa Clara, CA
Posts: 5,165
Total Cats: 855
Default
Originally Posted by aidandj
Y'all are gonna lose. Hailey is adamant that this isn't another project car. I told her it will stay stock until I get another daily for her.

Current plan is:
...
JDM rear clip with gen3 3S-GTE...

--Ian
codrus is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-06-2016, 07:21 PM
  #6182  
VladiTuned
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 35,821
Total Cats: 3,481
Default
nonsense

it will get a

BORGWARNER S366

18psi is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-06-2016, 07:31 PM
  #6183  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
Someday. Gotta wear them rings out even more so it can take more boost. 192k isn't enough.
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-06-2016, 07:58 PM
  #6184  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
Wow. Shitty to insure. Quote for me was $900 for 6 months....
Its under hailey's name so it was only $400.
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-06-2016, 09:03 PM
  #6185  
Elite Member
 
codrus's Avatar
 
Join Date: Mar 2007
Location: Santa Clara, CA
Posts: 5,165
Total Cats: 855
Default
Originally Posted by aidandj
Wow. Shitty to insure. Quote for me was $900 for 6 months....
Its under hailey's name so it was only $400.
License suspensions may have something to do with that.

--Ian
codrus is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-06-2016, 09:06 PM
  #6186  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
Originally Posted by codrus
License suspensions may have something to do with that.

--Ian
Actually the license suspensions don't affect it because they weren't driving related
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 11:49 AM
  #6187  
Elite Member
iTrader: (37)
 
EO2K's Avatar
 
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Default
Originally Posted by aidandj
How are you getting on with this sensor?

Originally Posted by aidandj
Saturn oil temp sender. Unless I can find a cheap 0-5v linear temp sender and tell the 2 wire sender's to go **** off.
Srs question: y u no 2 wire sender?

Originally Posted by aidandj
Need to order the EGT amplifier for the tinyiox. Also need to draw up all the ADC circuits I'll need.
I want to see all these things.
EO2K is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 12:36 PM
  #6188  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,297
Total Cats: 476
Default
I run that sensor on my car, works great. I have 3 of them.
patsmx5 is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 01:15 PM
  #6189  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
Originally Posted by EO2K
How are you getting on with this sensor?



Srs question: y u no 2 wire sender?



I want to see all these things.
It's all in my ms wiring document I shared a ways back. I'll share it with you G.

I have issues with grounding and 2 wires. Just annoying.

I'm not sure when they will go one. Projects have piled up, and ABS is more important than this stuff.
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 01:53 PM
  #6190  
Elite Member
iTrader: (37)
 
EO2K's Avatar
 
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Default
Originally Posted by aidandj
It's all in my ms wiring document I shared a ways back. I'll share it with you G.
I got the email, spanks! I'll take a look and see if I can funger this out.

My MS3-B has inputs for oil temp and pressure, I just need to figure out what sensors I want to use, and how to physically hook them up. I was considering using the TinyIOx for this task, but I already have inputs.
Originally Posted by aidandj
I have issues with grounding and 2 wires. Just annoying.
Really? I'm actively looking for 2 wire sensors so I can control the ground path. I'm done ******* with 1 wire sensors.
Originally Posted by aidandj
I'm not sure when they will go one. Projects have piled up, and ABS is more important than this stuff.
I feel this.
Originally Posted by patsmx5
I run that sensor on my car, works great. I have 3 of them.
Sweet! What value bias resistor are you guys using with these things?
EO2K is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 01:56 PM
  #6191  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
0-5v sensors don't need bias resistors. They just use ADC connections. If Rev wired it up for a 0-5v then just hook up the wires.
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 01:57 PM
  #6192  
Elite Member
iTrader: (37)
 
EO2K's Avatar
 
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Default
Yeah, I'm retarded. I realized my mistake but you responded before I got a chance to correct my post

I've been reading about sensors and inputs all morning, its starting to bleed together.

Originally Posted by patsmx5
I run that sensor on my car, works great. I have 3 of them.
I'm guessing oil pressure, fuel pressure and ...?
EO2K is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 02:00 PM
  #6193  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
My spreadsheet has almost all possible ms3 inputs.
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 02:04 PM
  #6194  
Elite Member
iTrader: (37)
 
EO2K's Avatar
 
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Default
Yep! I've been sorting through that, its been educational

y u 4 MAP sensors doe?
EO2K is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 02:06 PM
  #6195  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
Ran out of other ideas. 1 for baro, one for map, the 2 for testing. Intercooler pressure drop, crank case pressure, etc. Exhaust back pressure.

General datalogging.
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 03:08 PM
  #6196  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,297
Total Cats: 476
Default
Originally Posted by EO2K
I got the email, spanks! I'll take a look and see if I can funger this out.

My MS3-B has inputs for oil temp and pressure, I just need to figure out what sensors I want to use, and how to physically hook them up. I was considering using the TinyIOx for this task, but I already have inputs.

Really? I'm actively looking for 2 wire sensors so I can control the ground path. I'm done ******* with 1 wire sensors.

I feel this.

Sweet! What value bias resistor are you guys using with these things?
I'm not running a bias resistor. The sensor has 3 wires. Ground, +5V, and output. THink of it like a map sensor, but with NPT threads instead of a hose barb.
patsmx5 is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 03:09 PM
  #6197  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,297
Total Cats: 476
Default
Originally Posted by EO2K
Yeah, I'm retarded. I realized my mistake but you responded before I got a chance to correct my post

I've been reading about sensors and inputs all morning, its starting to bleed together.



I'm guessing oil pressure, fuel pressure and ...?
and coolant pressure.
patsmx5 is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 03:25 PM
  #6198  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
https://docs.google.com/spreadsheets/d/1HJSMqNgeR_GxYl-caJWsC-fmZ8-j47Wzyei8mxUbD1w/edit?usp=docslist_api

My sensor list.
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 04:03 PM
  #6199  
Elite Member
iTrader: (37)
 
EO2K's Avatar
 
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Default
Originally Posted by patsmx5
and coolant pressure.
Ah! That's what I figured but doesn't that sensor specifically say not to use it with water/coolant?
EO2K is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 02-07-2016, 04:05 PM
  #6200  
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default
Originally Posted by EO2K
Ah! That's what I figured but doesn't that sensor specifically say not to use it with water/coolant?
Some do some don't. I don't trust the ebay listings. If it worked for Pat I'd run it
aidandj is offline  
Reply
Leave a poscat 0 Leave a negcat



Advanced Search
Quick Reply: Aidan's loose oily bunghole actually runs a track lap


Reply Closed Thread Share

All times are GMT -4. The time now is 01:49 PM.