Aidan's loose oily bunghole actually runs a track lap
#9381
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Couple fun facts.
3rd gear, 4k rpm. Time from full throttle to 15psi.....
.562 seconds
6th gear pull from 2500rpm. 160kpa at 3100rpm. Would spool higher but boost control flattened out there.
3rd gear, 4k rpm. Time from full throttle to 15psi.....
.562 seconds
6th gear pull from 2500rpm. 160kpa at 3100rpm. Would spool higher but boost control flattened out there.
#9382
Elite Member
iTrader: (1)
Join Date: Apr 2014
Location: SF Bay Area, CA
Posts: 3,073
Total Cats: 550
Very nice, sorry I don't have more input on your misfires.
I think the turbosmart actuator is the only one that actually works. 34% is pretty good for 175kpa or so. Did you say your wastegate pressure was 3psi,?
I think the turbosmart actuator is the only one that actually works. 34% is pretty good for 175kpa or so. Did you say your wastegate pressure was 3psi,?
#9394
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Not happening. This one actually causes some nasty tune issues. Weird AFRs, bucking. Annoying. VVT is turned off for now.
#9397
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
Man. I need to start reading other people's build threads. There is such a wealth of knowledge on this page alone. I will apply aforementioned discussed principals to my own build.