Astroboy's reliability build (pic intensive)
Backstory: 90 chassis from Long Island that went cross country to Oahu after its first swap (short nose to long). Did some autox in Hawaii, swapped to a BP, did a hackjob boosting it, and shipped it back to CT. Sorted everything out and cracked out 213whp/191tq@9psi on this setup: BP, coolant reroute, OTT intercooler setup, RX7 550's, standalone MS1, Koyo 37mm rad, modified ebay catchcan, 8.3lb flywheel, stage 3 spec clutch w/ aluminum pp, hondata im gasket, tubular mani, 3" turboback exhaust w/magnablow highflow cat and blowmaster muffler.
Going to: COPS 99 Head w/ dual exhaust cams and fm cam gear (only have one) 84mm supertech pistons 9.0:1 mtuned rods (5 pre loved ones) mtuned dual feed fuel rail 190lph hp fuel pump Injector Dynamics fuel injectors 1000cc new gaskets, pumps, and belts 6 speed 3.63 gearset torsen Head is going to have work done on the ports and valves. Block is going to be bored, dipped, and checked for straightness. Everything in the rotating assembly is going to be balanced. Currently interior is out thinning out the harness, engine is going to be pulled by this weekend, have the shop picked out for the head and block work (about $900 for everything from a reputable shop), and have almost all the parts for completion (waiting for the gearbox to come in, and need to order/find the gearset and torsen). Once the engine is pulled I am going to clean the bay up and do some stitch welding in the engine bay and cabin followed by paint. My finish time is the end of March or when my wife has our kid, whichever comes first. Have some sorta constructive criticism?? Lay it on me. Want to be an unconstructive dick? Watch this video: http://www.youtube.com/watch?v=mfcefpoCj0M Pics: http://farm6.static.flickr.com/5247/...ddd231d7_b.jpg http://a7.sphotos.ak.fbcdn.net/hphot..._4810688_n.jpg http://a1.sphotos.ak.fbcdn.net/hphot..._1790535_n.jpg http://a3.sphotos.ak.fbcdn.net/hphot..._3056517_n.jpg http://a4.sphotos.ak.fbcdn.net/hphot..._4040083_n.jpg I'd like to thank everybody that sold me their old parts for sweet prices! I will be uploading pics of the hardware and engine bay when the engine gets plucked later in the week. |
I want your front bumper
|
Originally Posted by Sean
(Post 688055)
I want your front bumper
Build looks good so far, now where exactly are the reliability mods in that list? I see built block, head work etc, but what is going to make it so reliable? |
Built engine and the 6 speed. I am going to get some pretty full proof lines also (water and pressure/vaccume). I couldn't think of a better title but that was the driving force behind this build...get 300ish whp and not have to worry about grenading the gearbox (currently using a 90 5 speed), blowing/melting a line, bending a rod, or breaking a piston.
The bumper is going to go under the knife after the car is up and running to give me some more clearance. |
6 speeds will break at 300 still. It's more than stock so there us more load increasig wear.
But it will last longer than the 5 speed. |
I love the hotside charge piping...
|
Originally Posted by shlammed
(Post 688150)
6 speeds will break at 300 still. It's more than stock so there us more load increasig wear.
But it will last longer than the 5 speed. Plus, he might have a magic 5 speed! The ones that last forever, like mine :giggle: Astroboy, your car is cool looking. I had "so-so" feelings about the Adore bumper but it's growing on me. |
Thanks guys. I may have the magic 5 speed but don't want to push it. It has made magical whining noises for the past 60000ish miles. I am going to be tracking it out here once she is put together so we'll see how the 6 speed does.
|
She's now ready to have the engine pulled. Should have it out tomorrow, only a month behind schedule :(
http://a5.sphotos.ak.fbcdn.net/hphot..._7128035_n.jpg http://a3.sphotos.ak.fbcdn.net/hphot..._5740612_n.jpg The goods: http://a4.sphotos.ak.fbcdn.net/hphot..._3392885_n.jpg http://a2.sphotos.ak.fbcdn.net/hphot..._7334262_n.jpg http://a6.sphotos.ak.fbcdn.net/hphot..._3248291_n.jpg And if anybody knows the origin of this Exhaust manifold please chime in. I am trying to decide if I should move the ewg off #4 and get it to draw/exhaust off all cylinders and if so how. http://a7.sphotos.ak.fbcdn.net/hphot...4_900562_n.jpg http://a1.sphotos.ak.fbcdn.net/hphot..._2693331_n.jpg This is what will be attached to it: http://a7.sphotos.ak.fbcdn.net/hphot...1_333628_n.jpg And I need to make this my avatar: http://a8.sphotos.ak.fbcdn.net/hphot...0_934225_n.jpg |
I like your exhaust manifold...its different. I'd definitly try to move the ewg to the collector, maybe on the bottom side if it would work there..
|
In to watch.
What turbo is that? T3 something? |
I really want to move the ewg to the top and plug the opening for it...or build a new manifold seeing how 2 runners are the same length, one is an inch shorter, and the one with the ewg is an inch longer.
Fae, Today we managed to make a HUGE fucking mess, put together an engine stand, and gank the engine/transmission out. Everything looks kosher to me so far :D We'll see if there is more to the story upon teardown this week. http://a5.sphotos.ak.fbcdn.net/hphot..._2943850_n.jpg http://a3.sphotos.ak.fbcdn.net/hphot..._4721468_n.jpg |
Originally Posted by astroboy
(Post 689101)
Fae, there is no lable plate on the turbo so I am going by the wheel measurements and the mt guesstimate is a 3071 made by Garrett and is replacing a 3074 by Turbonetics.
Nothing says, "reliability" like a mystery turbo! |
I also think the front bumper is cool.
|
Originally Posted by Scrappy Jack
(Post 689107)
Nothing says, "reliability" like a mystery turbo!
|
For valentines day I cleaned up some oil, removed all the accessories, removed the head, and took some pics. All the cylinder bores have the crosshatching still in them and it looks like I was leaking some oil from valve seals (especially from #2 & #3). I am not sure what is going on in cylinder 1 & 4 but I am sure when I pull the rotating assembly out I will extract more info from it. Here are the pics:
http://a6.sphotos.ak.fbcdn.net/hphot..._2680293_n.jpg http://a7.sphotos.ak.fbcdn.net/hphot..._4386476_n.jpg http://a1.sphotos.ak.fbcdn.net/hphot..._8240740_n.jpg Cylinders 2 and 1 (in that order). It is hard to see but there is a black spot at the top of cylinder 1 only on the left side of the cylinder and only at the top. http://a3.sphotos.ak.fbcdn.net/hphot...2_704607_n.jpg Cylinder 4 and 3 (same) and cylinder 4 has the same shit as 1. I can't feel a pit or anything so idk what's going on. http://a5.sphotos.ak.fbcdn.net/hphot..._1511043_n.jpg And my discombobulation: http://a8.sphotos.ak.fbcdn.net/hphot...4_461294_n.jpg |
I want more details on the camera setup.
|
Originally Posted by Braineack
(Post 689870)
I want more details on the camera setup.
All your pictures are fantastic, they make mine look like a underwater disposable. Oh and I like your manifold a lot. I may copy the design, hope you don't mind ;) |
|
Originally Posted by Braineack
(Post 689870)
I want more details on the camera setup.
Originally Posted by viperormiata
(Post 689883)
Oh and I like your manifold a lot. I may copy the design, hope you don't mind ;)
Originally Posted by Faeflora
(Post 689892)
This seems to be a common mod on the forum.
|
All times are GMT -4. The time now is 04:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands