Originally Posted by Boost_addict (Post 1359587)

this has been bugging me so I'm putting this idiot on blast.

This guy calls me, and asks if he can have the lightest weight, best flowing, but still completely quiet exhaust system ever.

I take my time out of my very busy day to explain what his options are. This took more than a couple minutes, which clearly weren't valued when you consider I charge 100$ an hour for my very valuable time. I educated this man on exhaust systems, literally, as he didn't understand one single thing I explained. I took the time to explain how typically a quiet system doesn't flow too well, and a flowing system typically doesn't quiet too much. I explained a possible option would be to put two very large straight through mufflers out back. His response was something along the lines of how he didn't know if he liked that, with a very skeptical tone of voice. Then I explained how there are other options, such as valvetronic systems, and how I could whip up a number of different combinations for him. After what must have been an hour long phone call, which I truly kindly gave away my time for, this guy goes on to say how he thought I could just make it without his car there. He said something like "wait you need my car?? Huh?"

major or bad vibes???? You're one of the first person who has EVER said that about me. I spend time meditating every day. I practice manifestation. I am spiritually enlightened and awakened. I believe in karma, and I seriously don't fuck with it. I hold doors open for everyone, give out favors for everyone.. I give out advice to those who ask, and anything I can do to help people I do.

And you fucking say this to me?????

then he turns around and acts like this. Why? Because I told his asshole buddy to go fuck himself. Now literally he is trying to make me look bad? Dude do you think I care what you think at all?

What a fucking prick. Seriously dude, fuck you, fucking asshole. You owe me an hour for my time.

Then he smashes my work, when he literally doesn't know a thing. You think welding Inconel is hard?? Who the fuck is this guy you're referring to who still needs 1000 hours to feel confident? 1000 hours???? That's more time than I practiced total to when I was Learning to be able to lay straight dimes, full penetration, no bs. Inconel is Mildly harder than stainless, same with titanium. You just have to know how to control your heat, and use proper gas coverage.

I don't need to prove myself. I set up THE FIRST high performance exhaust manufacturing company the Middle East has ever seen, completely by myself. That's designing, prototyping, testing, setting production up on, training employees, quality control, general managing, and talking to every customer who walks in. Bullet performance had over 20 employees by the time I came home, they now are making over 1 mil per year profit.
I did that by myself. Sounds like the work of a real idiot huh?
I'm sure you're a real expert in the world of manufacturing, engineering, and the likes. We all really appreciate your insight, thank you so much.

Not a real engineer you say? This gets me the most angry. First of all, you idiot, please google the definition of engineer. Maybe you meant degree holding. Second, I made a very fucking conscious choice to not go to school for engineering and do things on my own. Why you ask? Because for me, it works better. I can't believe for a second that school would have done the same as these years have. Keep in mind, I have aggressively trained myself, covering areas like machining, manufacturing, welding, production, managing, blueprint writing, 3D modeling, and all the other things a REAL engineer should be able to do. 90% of degree'd engineers would get fucking schooled by my me in the real world. That's not exaggerating, it's true. I'm not calling engineers stupid, they're not, and there's some things they know I don't. I have a lot of engineer friends and they all laugh at how little school did for them when we talk for the most part though. Most engineers don't even understand how the machines that are making the parts they model on their computer even work, leading to parts that cannot be made (real experience from my time as a machinist)

You want to keep going? What a fucking prick. Don't you ever call me to fucking waste my time on the phone ever again. To think, all I ever did for you was take time out of my day, so very fucking kindly, to educate you completely on something you were trying to buy from me. You're so fucking stupid I spent 4 times longer than I needed to simply repeating myself. Please go fuck yourself ok.

Originally Posted by Boost_addict (Post 1359587)

this has been bugging me so I'm putting this idiot on blast.

This guy calls me, and asks if he can have the lightest weight, best flowing, but still completely quiet exhaust system ever.

I take my time out of my very busy day to explain what his options are. This took more than a couple minutes, which clearly weren't valued when you consider I charge 100$ an hour for my very valuable time. I educated this man on exhaust systems, literally, as he didn't understand one single thing I explained. I took the time to explain how typically a quiet system doesn't flow too well, and a flowing system typically doesn't quiet too much. I explained a possible option would be to put two very large straight through mufflers out back. His response was something along the lines of how he didn't know if he liked that, with a very skeptical tone of voice. Then I explained how there are other options, such as valvetronic systems, and how I could whip up a number of different combinations for him. After what must have been an hour long phone call, which I truly kindly gave away my time for, this guy goes on to say how he thought I could just make it without his car there. He said something like "wait you need my car?? Huh?"

major or bad vibes???? You're one of the first person who has EVER said that about me. I spend time meditating every day. I practice manifestation. I am spiritually enlightened and awakened. I believe in karma, and I seriously don't fuck with it. I hold doors open for everyone, give out favors for everyone.. I give out advice to those who ask, and anything I can do to help people I do.

And you fucking say this to me?????

then he turns around and acts like this. Why? Because I told his asshole buddy to go fuck himself. Now literally he is trying to make me look bad? Dude do you think I care what you think at all?

What a fucking prick. Seriously dude, fuck you, fucking asshole. You owe me an hour for my time.

Then he smashes my work, when he literally doesn't know a thing. You think welding Inconel is hard?? Who the fuck is this guy you're referring to who still needs 1000 hours to feel confident? 1000 hours???? That's more time than I practiced total to when I was Learning to be able to lay straight dimes, full penetration, no bs. Inconel is Mildly harder than stainless, same with titanium. You just have to know how to control your heat, and use proper gas coverage.

I don't need to prove myself. I set up THE FIRST high performance exhaust manufacturing company the Middle East has ever seen, completely by myself. That's designing, prototyping, testing, setting production up on, training employees, quality control, general managing, and talking to every customer who walks in. Bullet performance had over 20 employees by the time I came home, they now are making over 1 mil per year profit.
I did that by myself. Sounds like the work of a real idiot huh?
I'm sure you're a real expert in the world of manufacturing, engineering, and the likes. We all really appreciate your insight, thank you so much.

Not a real engineer you say? This gets me the most angry. First of all, you idiot, please google the definition of engineer. Maybe you meant degree holding. Second, I made a very fucking conscious choice to not go to school for engineering and do things on my own. Why you ask? Because for me, it works better. I can't believe for a second that school would have done the same as these years have. Keep in mind, I have aggressively trained myself, covering areas like machining, manufacturing, welding, production, managing, blueprint writing, 3D modeling, and all the other things a REAL engineer should be able to do. 90% of degree'd engineers would get fucking schooled by my me in the real world. That's not exaggerating, it's true. I'm not calling engineers stupid, they're not, and there's some things they know I don't. I have a lot of engineer friends and they all laugh at how little school did for them when we talk for the most part though. Most engineers don't even understand how the machines that are making the parts they model on their computer even work, leading to parts that cannot be made (real experience from my time as a machinist)

You want to keep going? What a fucking prick. Don't you ever call me to fucking waste my time on the phone ever again. To think, all I ever did for you was take time out of my day, so very fucking kindly, to educate you completely on something you were trying to buy from me. You're so fucking stupid I spent 4 times longer than I needed to simply repeating myself. Please go fuck yourself ok.

Originally Posted by iDizzle (Post 1359657)

I just want to see the damn manifold complete.

Originally Posted by leboeuf (Post 1359599)

Now I have to know what the backstory on the smiley is... Who is robertfmelbert? :robert: What do you have to do to get your own immortal smiley?

Originally Posted by ryansmoneypit (Post 1359659)

Who gives a fuck. If he had not posted anything, it would have been a total piece of wrong shit.

Originally Posted by sixshooter (Post 1359797)

Does Boost Addict wear a fedora?

click to play

Originally Posted by psyber_0ptix (Post 1359802)

Too bad that's not a fedora but a Trilby.