Faelflora breaks his promise, time to part out car. GIT THE SAWZALL!
03-27-2011, 01:39 AM
#822
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Did you hear
My navigator also took me for a spin in his bone stock miata and made me soil my panties while passing a slow car by crossing in the opposing traffic lane and barely missing an oncoming car around a tight blind curve at 80mph while up on two wheels. I thought I was going to die. That said, it was a positive experience.
Reply
0
0
03-28-2011, 08:07 PM
#827
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Just ordered a pile of fittings and hoses to do the following:
-6 teflon line for the fuel feed and return. if i need more fuel in the future and go to a dual pump bosch setup I will be ready.
-6 weld on bungs. Will have both the bungs and a -6 sized pipe welded into the fuel tank lid
-4 ss braid line for my wastegate and compressor housing line plus the adapters to screw them right in (thanks hingstonm, sean for how-tos)
some adapters to go from ss braid to bungs for the vacuum lines
Also ordered some 225/50/15 mickey thompson drag radial II for the rear. I'm gonna need em.
-6 teflon line for the fuel feed and return. if i need more fuel in the future and go to a dual pump bosch setup I will be ready.
-6 weld on bungs. Will have both the bungs and a -6 sized pipe welded into the fuel tank lid
-4 ss braid line for my wastegate and compressor housing line plus the adapters to screw them right in (thanks hingstonm, sean for how-tos)
some adapters to go from ss braid to bungs for the vacuum lines
Also ordered some 225/50/15 mickey thompson drag radial II for the rear. I'm gonna need em.
Reply
0
0
I say setting 3
03-28-2011, 09:54 PM
#830
Just ordered a pile of fittings and hoses to do the following:
-6 teflon line for the fuel feed and return. if i need more fuel in the future and go to a dual pump bosch setup I will be ready.
-6 weld on bungs. Will have both the bungs and a -6 sized pipe welded into the fuel tank lid
-4 ss braid line for my wastegate and compressor housing line plus the adapters to screw them right in (thanks hingstonm, sean for how-tos)
some adapters to go from ss braid to bungs for the vacuum lines
Also ordered some 225/50/15 mickey thompson drag radial II for the rear. I'm gonna need em.
-6 teflon line for the fuel feed and return. if i need more fuel in the future and go to a dual pump bosch setup I will be ready.
-6 weld on bungs. Will have both the bungs and a -6 sized pipe welded into the fuel tank lid
-4 ss braid line for my wastegate and compressor housing line plus the adapters to screw them right in (thanks hingstonm, sean for how-tos)
some adapters to go from ss braid to bungs for the vacuum lines
Also ordered some 225/50/15 mickey thompson drag radial II for the rear. I'm gonna need em.
In for wheelstand lulz
Reply
0
0
03-28-2011, 11:35 PM
#833
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
I also got my cxracing radiator today. Everyone knows what that looks like so no pictures for you.
I like that my radiator cost more than my future manifold. lol I hope that offends everyone.
I like that my radiator cost more than my future manifold. lol I hope that offends everyone.
Reply
0
0
03-29-2011, 02:16 AM
#834
Junior Member
Join Date: Feb 2010
Location: Oslo, Norway
Posts: 219
Total Cats: 1
I just ordered two of these, they come highly recommended.
Will probably boost you above 600 whp.
http://cgi.ebay.co.uk/Mazda-Supercha...item4aa9e24e42
Will fit perfectly with the new manifold.
Will probably boost you above 600 whp.
http://cgi.ebay.co.uk/Mazda-Supercha...item4aa9e24e42
Will fit perfectly with the new manifold.
Reply
0
0
03-29-2011, 11:45 AM
#836
http://www.google.com/products/catal...d=0CCsQ8gIwAA#
Open ended and locking. Perfect for the ARP studs...
Open ended and locking. Perfect for the ARP studs...
Reply
0
0
03-29-2011, 07:21 PM
#838
Newb
Join Date: Oct 2010
Posts: 34
Total Cats: 0
i wouldnt call me a newbie... iv got over 2x the post count you have on supraforums and im pretty much on every car forum on the interwebz!
min drop off that sweet manifold you picked up when you get your flanges and dont forget about the wastegate flange... ill hook you up with a sweet open dump setup and youll be super serious on the streets!
k thx
min drop off that sweet manifold you picked up when you get your flanges and dont forget about the wastegate flange... ill hook you up with a sweet open dump setup and youll be super serious on the streets!
k thx
Reply
0
0
03-29-2011, 07:31 PM
#839
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
BTW Shuiend I would like to have colored lugs but they are expensive and after taking my wheels on and off a few times they would mar up and look like my current aluminum lugs. All fucked up :(
Reply
0
0
03-29-2011, 07:34 PM
#840
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,176
Total Cats: 1,680
I don't get it. Is there anything special about these lugnuts that would make them hard to find? They look just like other aluminum lugnuts I've seen everywhere.
BTW Shuiend I would like to have colored lugs but they are expensive and after taking my wheels on and off a few times they would mar up and look like my current aluminum lugs. All fucked up :(
BTW Shuiend I would like to have colored lugs but they are expensive and after taking my wheels on and off a few times they would mar up and look like my current aluminum lugs. All fucked up :(
Reply
0
0
