H3AVY to H3AVYER to...H3AV1EST P1G
#1501
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
haha its all good man. I aint even mad
Welp, that looks really cool, but I guess my MS3/firmware or whatever doesn't even have that drop down at all.
:(
But thanks for the link to that guide, for whatever reason I've never even seen it before. Looks really really cool and I bet I'll learn a metric ton when I read it all. This will be my spare time reading material now
Welp, that looks really cool, but I guess my MS3/firmware or whatever doesn't even have that drop down at all.
:(
But thanks for the link to that guide, for whatever reason I've never even seen it before. Looks really really cool and I bet I'll learn a metric ton when I read it all. This will be my spare time reading material now
Those docs are the 'new' docs that the devs are writing. They're better than what came before, but still lacking in information sadly.
#1502
Yeah, that's MS for ya lol.
Ok, so let's assume that my wires/pins/loom is bad and I want to replace it all. Anyone have any ideas on where I get it? I think leafy had a connector thread, I guess I'll go check it out. Also I think I'm going to need some wire sleeves/loom, and some self fusing silicone tape.
The part I don't know where to get is the pins for inside the connector.
If I'm gonna do this, I'm gonna do this right.
Ok, so let's assume that my wires/pins/loom is bad and I want to replace it all. Anyone have any ideas on where I get it? I think leafy had a connector thread, I guess I'll go check it out. Also I think I'm going to need some wire sleeves/loom, and some self fusing silicone tape.
The part I don't know where to get is the pins for inside the connector.
If I'm gonna do this, I'm gonna do this right.
#1503
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
Yeah, that's MS for ya lol.
Ok, so let's assume that my wires/pins/loom is bad and I want to replace it all. Anyone have any ideas on where I get it? I think leafy had a connector thread, I guess I'll go check it out. Also I think I'm going to need some wire sleeves/loom, and some self fusing silicone tape.
The part I don't know where to get is the pins for inside the connector.
If I'm gonna do this, I'm gonna do this right.
Ok, so let's assume that my wires/pins/loom is bad and I want to replace it all. Anyone have any ideas on where I get it? I think leafy had a connector thread, I guess I'll go check it out. Also I think I'm going to need some wire sleeves/loom, and some self fusing silicone tape.
The part I don't know where to get is the pins for inside the connector.
If I'm gonna do this, I'm gonna do this right.
#1508
There is no drama.
Scott threw a fit cause I called out Corky for all the stupid bs they do and all the crap they pull. Scott agree's with me because on several occasions we talked about it and him and me are 100% in agreement about how mismanaged and terribly run Begi is.
And yet publicly he defends them like crazy, and anyone saying anything negative is silenced and posts are deleted. I made a couple jokes about that, you can see my comment (what's left of it in another persons quote, since he actually edited my post(s) and deleted all my comments). He got really mad at the jokes apparently, and banned me with posted reason "ask and you shall receive".
I have a lower opinion of people/things/etc now (not that it matters) and will likely cut down my posting on this site to a bare minimum. Too many people getting too butthurt too often.
I'm assuming its ok for me to post this up here in my very own thread, but if it's not and I get banned again, most you guys have my number and email and know me in real life so you know how to contact me. If I get banned again for this kind of stupidity I'l likely never return to this site except for when I part out and sell my miata. (again, not that it matters, just saying to those that want to know).
That is all.
PS: I'm really not mad or upset, at Scott or anyone else. I just realized I cared too much, and I need to stop caring. Apparently it bother people to no end when I stick up for people and/or this site. I guess we should all just luagh and joke about people getting screwed over by companies, and let the n00bs run rampant and crap up our forum or turn it into club roadster. Apparently my care is interpreted as bad taste and troublemaking. Whatever, I'll shut up now lol
Scott threw a fit cause I called out Corky for all the stupid bs they do and all the crap they pull. Scott agree's with me because on several occasions we talked about it and him and me are 100% in agreement about how mismanaged and terribly run Begi is.
And yet publicly he defends them like crazy, and anyone saying anything negative is silenced and posts are deleted. I made a couple jokes about that, you can see my comment (what's left of it in another persons quote, since he actually edited my post(s) and deleted all my comments). He got really mad at the jokes apparently, and banned me with posted reason "ask and you shall receive".
I have a lower opinion of people/things/etc now (not that it matters) and will likely cut down my posting on this site to a bare minimum. Too many people getting too butthurt too often.
I'm assuming its ok for me to post this up here in my very own thread, but if it's not and I get banned again, most you guys have my number and email and know me in real life so you know how to contact me. If I get banned again for this kind of stupidity I'l likely never return to this site except for when I part out and sell my miata. (again, not that it matters, just saying to those that want to know).
That is all.
PS: I'm really not mad or upset, at Scott or anyone else. I just realized I cared too much, and I need to stop caring. Apparently it bother people to no end when I stick up for people and/or this site. I guess we should all just luagh and joke about people getting screwed over by companies, and let the n00bs run rampant and crap up our forum or turn it into club roadster. Apparently my care is interpreted as bad taste and troublemaking. Whatever, I'll shut up now lol
Last edited by 18psi; 11-21-2014 at 03:03 PM.
#1510
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
When you go out of your way to bash a sponsor, constantly, (see my user title) I have to do something. If I didn't, other mods were about to do that same.
If you were about to air your grievances without attacking, or harassing, or going out of the way, in appropriate places, I wouldn't give a flying fart.
see: tactful - Dictionary Definition : Vocabulary.com
so yeah, dont pull an idrA.
If you were about to air your grievances without attacking, or harassing, or going out of the way, in appropriate places, I wouldn't give a flying fart.
see: tactful - Dictionary Definition : Vocabulary.com
so yeah, dont pull an idrA.
#1511
I am going to have to agree with Brain. Vlad, you have the tendency to take it way overboard and escalate it far beyond where it needs to go to be helpful. You name call, use offensive language, and just generally fly off the handle consistently. You do this to noobs too. MT.net is notorious for not sugar coating things and shaming noobs but you often take it overboard quickly. It reminds me of customers I use to serve when I worked retail that would just harass and berate employees for simple mistakes because they could.
#1512
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 856
For me, it's like this. If the ban had been permanent, I think I would not have liked it. As it was, it made a point, and, personally, I think it a humorous approach.
Vlad, I think Ryan posts good advice, but I would also add that I think you are a big asset to this forum.
See the humor in the, "Ask and you shall receive", learn when to stop beating a dead horse, and let's have fun again, building, driving, and (boy I hope not), blowing up Miatas.
Vlad, I think Ryan posts good advice, but I would also add that I think you are a big asset to this forum.
See the humor in the, "Ask and you shall receive", learn when to stop beating a dead horse, and let's have fun again, building, driving, and (boy I hope not), blowing up Miatas.
#1515
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,951
Total Cats: 1,004
For me, it's like this. If the ban had been permanent, I think I would not have liked it. As it was, it made a point, and, personally, I think it a humorous approach.
Vlad, I think Ryan posts good advice, but I would also add that I think you are a big asset to this forum.
See the humor in the, "Ask and you shall receive", learn when to stop beating a dead horse, and let's have fun again, building, driving, and (boy I hope not), blowing up Miatas.
Vlad, I think Ryan posts good advice, but I would also add that I think you are a big asset to this forum.
See the humor in the, "Ask and you shall receive", learn when to stop beating a dead horse, and let's have fun again, building, driving, and (boy I hope not), blowing up Miatas.