deezums

iTrader: (3)

Why are you swapping throttle bodies again? Your old tps died?

aidandj

iTrader: (5)

<p>Well nvm, realized i can't do that swap. the adapter plate is for a 1.6 tb on a 1.8.</p><p>Guess I'll be rewiring this one again.</p><p>But yeah, my old TPS is dead, I need to find another one.</p>

deezums

iTrader: (3)

1.8 on a 1.6 would be slick though, they all have real tps and the IAC draws from inline right, no more little tube?

Rallas

iTrader: (9)

The press in studs that look like wheel studs would be ideal. The McMaster ones are too small.

4 Genuine Polaris Wheels Studs 3 8 24x1 38" Press Fit 7518378 | eBay

These will work great. Only need this on the caliper ears.

Standard Part - Male Press Mount Knurled Stud

Rallas

iTrader: (9)

McMaster didn't have those press in studs in the diameters we need.

3 8 ? 16 Captive Press in Wheel Stud Bolt 18 New | eBay

These will work and $1 a piece isn't bad. Should be able to get them at a local Polaris dealer too

deezums

iTrader: (3)

Those last ones you linked will not fit. If the thing is recessed enough to not hit the rotor the splines will be in the wilwood, if it's not recessed that far, it'll be in the rotor.

I think we might be able to find something that will work, but it won't be as easy nor replaceable as the square bolt.

Then there's m10 studs, the wilwood I have measures a few thou shy of 10mm. Maybe it would fit?

http://shop.advanceautoparts.com/p/d...ontent=5010241

aidandj

iTrader: (5)

<p>Ok. Break from brake stuff.</p><p>Going to pick-n-pull tomorrow.</p><p>Which models had TPS? Automatic right?</p><p>Maybe I'll just go find every BMW I can and see if they have the right tps :/</p>

Monk

iTrader: (3)

You had to do it didn't you?

aidandj

iTrader: (5)

<p>Well I mean someone had to...</p>

Rallas

iTrader: (9)

You can make a 5.0 ford TPS work too. I should have mailed you the one I made to work with my 1.6.

hi_im_sean

iTrader: (3)

wells tps201?

aidandj

iTrader: (5)

<p>There are a couple BMW's in pick-n-pull. Going digging tomorrow.</p>

aidandj

iTrader: (5)

<p>Maybe I'll find a goldmine and sell them all here. Well see.</p>

deezums

iTrader: (3)

I found cheap polaris studs, should be long enough but they don't have a shoulder too fat or long to pull through the aluminum.

7518378 STUD-3/8-24X1.38,PRESS FIT-Z $0.80

at 0.80, they aren't much more expensive than square bolts

Rallas

iTrader: (9)

Do it!!!

Now, back to TPS discussion.

aidandj

iTrader: (5)

************. All the BMWs have the 3 wire sensor. Not a single 6 wire.

Sean, link me the wells tps info.

hi_im_sean

iTrader: (3)

wells tps info pt1

this is the way I did it, you dont need to go as in depth
wells tps info pt2

wells tps info pt3

rockauto $17.51

aidandj

iTrader: (5)

Thank you.

aidandj

iTrader: (5)

<p>So now I guess I have to find my old TPS. That should suck.</p><p>Splurged today for the more expensive rear 1.8 pads.</p><p><br /></p>

aidandj

iTrader: (5)

<p>Video dump from last weekend. #6 is fastest, #7 is funnest.</p><p>I do weird stuff with my hands</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>