Aidan's loose oily bunghole actually runs a track lap
#5803
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Found an old picture from @ThePass build. And his spoiler. Going to try and do something similar. Need to try and draw it up, then get it cut.
https://www.miataturbo.net/race-prep...69/#post845055
https://www.miataturbo.net/race-prep...69/#post845055
#5805
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
3" exhaust comparison. Insanity. Both with 3" downpipe turbo back.
2.75ish exhaust (corksport drift). 10.1psi@3659rpm
Custom SADFab 3" exhaust: 10psi@2898rpm
2.75ish exhaust (corksport drift). 10.1psi@3659rpm
Custom SADFab 3" exhaust: 10psi@2898rpm
#5810
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
3" radius...
Someone please sig cordys quote. I would but I just got my dope new corky sig.
Disclaimer. Different gears were used.
I'm going to try and do a better match up sometime.
Someone please sig cordys quote. I would but I just got my dope new corky sig.
Disclaimer. Different gears were used.
I'm going to try and do a better match up sometime.
#5812
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
First step in the bushing replacement. Pressing out old bushing in the ABS spindles, and welding in the spherical sleeves. These will get powdercoated before they go on. **** midwest salt, this **** is ridiculous. I had to grind so much metal off just to get clean metal to weld to.
Yank's car is living at my garage for a bit. Going to start updating his thread soon too. But FE3 **** for you ******** who don't visit his thread.
Got to drive a K-swap, that was cool. I still would rather have a v8 if I get rid of a BP.
NRG short hub courtesy of stefan. Stoked
A bunch of delrin bushing pictures:
Bonus cat picture:
Yank's car is living at my garage for a bit. Going to start updating his thread soon too. But FE3 **** for you ******** who don't visit his thread.
Got to drive a K-swap, that was cool. I still would rather have a v8 if I get rid of a BP.
NRG short hub courtesy of stefan. Stoked
A bunch of delrin bushing pictures:
Bonus cat picture:
#5815
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Wrong thread bruh. FE3 = kia sportage motor. Legendary mazda motor that is good for like 600hp stock or something.
https://www.miataturbo.net/build-thr...6/#post1296547
Thats the dry sump oil tank.
Did you want me to cut up my old bumper still?
https://www.miataturbo.net/build-thr...6/#post1296547
Thats the dry sump oil tank.
Did you want me to cut up my old bumper still?
#5816
This thread is never the wrong thread.
I don't understand wanting to swap a 4 banger. Everything else stock is useless past stock power levels anyway. 5.3 truck blocks are cheaper than kia sportage anything. They too are good for more than 600, but they make torque on their own already anyway.
Meh. Not my cup of tea.
I wouldn't mind a chunk of bumper. If I can find out what I'm doing with that I'll actually do something with the rest of the car. I'm not buying a $400 front bumper though, **** that.
I don't understand wanting to swap a 4 banger. Everything else stock is useless past stock power levels anyway. 5.3 truck blocks are cheaper than kia sportage anything. They too are good for more than 600, but they make torque on their own already anyway.
Meh. Not my cup of tea.
I wouldn't mind a chunk of bumper. If I can find out what I'm doing with that I'll actually do something with the rest of the car. I'm not buying a $400 front bumper though, **** that.
#5817
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
true. at the beginning this used a stock subframe etc.
Ben has stated more than once that a v8 is a cheaper way to make the power he is making. The project is fun though.
Ben has stated more than once that a v8 is a cheaper way to make the power he is making. The project is fun though.