Aidan's loose oily bunghole actually runs a track lap
07-26-2016, 03:32 PM
#7042
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Probably wont be any differences. Temps never went above 185ish before.
Maybe oil temps will be a bit lower because it should flow more through the radiator.
Maybe oil temps will be a bit lower because it should flow more through the radiator.
Reply
0
0
07-26-2016, 03:40 PM
#7044
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Its all witchcraft and sorcery.
Right?
I wanted the TSE rad but thats $500 more than I spent on this one. Crossflow is out of stock and also another $250 than i spent.
Right?
I wanted the TSE rad but thats $500 more than I spent on this one. Crossflow is out of stock and also another $250 than i spent.
Reply
0
0
07-26-2016, 03:43 PM
#7046
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Wheels were less than $500... Tires were less than $500... Twin disc was less than $500...
Technically Xidas were more than $500. But I sold my old suspension for as much as I bought the Xidas for.
MS was the only thing on the car that cost more than $500 in one go.
Technically Xidas were more than $500. But I sold my old suspension for as much as I bought the Xidas for.
MS was the only thing on the car that cost more than $500 in one go.
Reply
0
0
07-26-2016, 06:22 PM
#7051
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I've never had to slow down because of overheating. It really never goes above 200. Ducting and hood vent works pretty well.
Only got the CSF for potential reliability concerns with the CXRacing one. Even though there are no signs of it deteriorating.
Only got the CSF for potential reliability concerns with the CXRacing one. Even though there are no signs of it deteriorating.
Reply
0
0
07-26-2016, 11:54 PM
#7054
Elite Member
Join Date: Oct 2013
Location: NorthWest NJ
Posts: 1,821
Total Cats: 141
Is the one you ordered black and all metal? From the drawn pictures I have seen on amazon, it looks the same as the rad in my car.
Reply
0
0
07-27-2016, 12:20 AM
#7057
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
https://www.amazon.com/gp/aw/d/B001F...?ie=UTF8&psc=1
I would have bought it from 949 if I didn't have the gift cards from work. No reason not to.
I would have bought it from 949 if I didn't have the gift cards from work. No reason not to.
Reply
0
0
07-27-2016, 09:36 AM
#7058
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
So I swapped my tires side to side last week. And I have more outside wear than inside wear. Last time I checked tire temps they were quite even, at around 32-34psi at the track.
Should I try running more pressure? 205 z2*'s
Should I try running more pressure? 205 z2*'s
Reply
0
0
07-27-2016, 11:06 AM
#7059
Elite Member
Join Date: Oct 2013
Location: NorthWest NJ
Posts: 1,821
Total Cats: 141
https://www.amazon.com/gp/aw/d/B001F...?ie=UTF8&psc=1
I would have bought it from 949 if I didn't have the gift cards from work. No reason not to.
I would have bought it from 949 if I didn't have the gift cards from work. No reason not to.
Reply
0
0
