Just your average K24/Drysump/Stocksubframe/S2000trans build for NASA/WRL
 

Edit: Honda stuff starts at post 65.

After 10 years of mostly lurking on this forum, I've finally decided to make a build thread. I've learned a ton from this place over the years but haven't had many opportunities to give back, so I'm going to attempt to document my Ecotec swap. Most of the good ecotec information is buried in facebook right now, and... Fuck. That.

I'll be running this car in WRL GP1 and NASA ST4, and maybe ST5 as well with a detune and a bunch of ballast. Honestly the ecotec swap still ranks pretty low on my list of favorite miata engines, but I decided it's the best fit for my needs. The endurance racing aspect meant ruling out boost, both for reliability and fuel economy reasons. The NASA ST4/5 rules mean I have to keep the stock unmodified subframe, so Ecotec or built n/a BP were really the only two options left. A lightly built BP can make enough power for ST5, but the Ecotec makes 20-40hp more for quite a bit less money, with a much fatter midrange. Plus I've always preferred $700 junkyard replacements over built motors. And 245 hoosiers for ST4 are only $33 more per set than 225 Hoosiers for ST5. And 2250lb ST4 comp weight sounds way more fun than 2450-2500lb ST5 comp weight. And enduros will be more fun with more power, since there will be less getting passed on the straights and held up in the corners by 250hp turbo Saabs that are somehow 2 classes below me. And...

Starting with a relatively clean 2001 chassis that was someone else's failed turbo kswap drag car project. Thankfully he didn't get much farther than disassembling everything and then rattle canning the interior flat black. I bought it for $1000 last fall with no engine, transmission, or interior. Dropped my old 99 drivetrain into it so that it could be moved around easily, and then immediately took it to Mark Mcmahan in Akron for the cage. Picked it back up 2 weeks ago and have slowly been working on all the non-drivetrain stuff while I wait for my swap kit to arrive. Swap kit was ordered in December and should be shipping any day now, but I still have plenty of stuff to keep me busy.

Parts/plans:

Nice. :)

Full custom cage or a Spec kit?

Full custom.

Photos don't work for me

Dammit. I thought google links would work with a public, shared google photos album. How about now?

Just curious, why isn't there any bars tying the halo nodes (diagonal or center)? Seems like a lot of room for stuff to get in/out if the hardtop comes off in a roll over.

:bigtu:

Short answer: I forgot.

Long answer: This is my second Mcmahan NB cage in 2 years.The first one only got about 4 races under its belt before getting totalled in the WRL enduro at Road America last May. Oil down in the kink is bad news. That car had a passenger seat so that I could give ride alongs while instructing, so I intentionally left the roof diagonal out for headroom reasons. I told Mark to make this cage identical to the last one except for a couple small change requests, and I forgot about the roof bar. I'll probably add it myself at some point, but that's a pretty rare crash scenario so I'm not super worried about it.

What seat is that?

PS: welcome, fellow Ecotec swapper!

Tillett B6F. Details and pictures located here:

https://www.miataturbo.net/race-prep...a-84927/page4/

Bauce.

That cagework is legit!

Hell yizz. That cage work is on point...... as usual. Mad jelly of that.

I take it the car will be on 15x10s for both sets of tires?

I'm not sure yet. I'm going to play with spacers on a 15x9/225 and/or borrow a 15x10 from one of the Louisville guys to test fit. I need to see for myself exactly how much fender fucking is required for 10s before making the call.

Not much on an NB as long as you don't have a thooper speshul wide track edition.

I bet it will require minimal fender fucking.

Also, looking for any WRL team-mates?! :D

It won't. The setup on my car that required massive fucking fits on the other car with a flat roll.

I followed your 15x10 saga for a little while but eventually lost track. What ended up being the source of your problems?

Aliens, probably.

I'm guessing it has to be a "death by thousand cuts" scenario. Setup would absolutely fit on the blue car with a flat roll.

Thanks. The weirdness with your car is one of the things that made me want to see the fitment in person with my own eyes on my own car before making the call. I'm less scared now.