|
Miata 2: Electric Boogaloo
Never even got caught up with my first build thread, so naturally, I have to make one for the car that replaced it.
I saw that tblakey was parting his AutoKonexion GT racecar on FB at the beginning of 2023, and I was originally going to buy only the AK fastback and 6s trans from him. Somehow, talking to my friends in various group chats led to me purchasing the rolling chassis from him. I ended up purchasing the caged rolling chassis with widebody kit and fastback, 6s trans, fire suppression, and various bits and bobs that were on the car. It was not worth the effort to have him remove small parts like mirrors and seat mounts and try to find replacements myself. I missed the opportunity to buy the APR 250 as well as the BroFab hubs that were previously on the car, and I didn't want the hood since I visually like the Trackspec Motorsports vents more than the Singular vents. Previous build thread This should be a "simple" chassis swap with my existing motor and Supermiata-tuned OSG, stick another wing on it, and send it for a little bit without anything having to do anything drastic. In early April 2023, I drove down to SoCal with the hood from my previous car and went to go see the car. The guy who painted the car orange would also help me paint the hood and tow it up for a ridiculously low price. The plan was to get the car finished by Miata Reunion at Sonoma in late October 2023. ~7 months to finish a chassis swap for the first time. It's all just miata stuff so super easy, right? Here is the car loaded on his trailer on the day of pickup. https://i.imgur.com/IcY65nPh.jpg Some exterior pics from some of the listings for archival purposes https://i.imgur.com/Yb1HLPHh.jpg https://i.imgur.com/KUKgPXmh.jpg https://i.imgur.com/w7uzEwoh.jpg Got back to my place and immediately went into hovercar mode. I don't have a garage, but I've built a canopy setup in the gated area I have access to. https://i.imgur.com/FQookZF.jpg |
Pictures with threatening auras
https://i.imgur.com/nIeEGIsh.jpg Baby's first engine pull, thanks twibs415 for lending me your hoist https://i.imgur.com/u13k4Dvh.jpg Motor/trans out https://i.imgur.com/pKRdzVAh.jpg https://i.imgur.com/tWotXUGl.jpg Installing 6s https://i.imgur.com/i7R3Jj2h.jpg Stuffing motor/trans into the car. An issue that presented itself as soon as I got the motor into the car was the fact that I'm using a modified NA8 cam angle sensor, and the location for 1/3 of the bulkhead connectors in the middle of the firewall is not accessible at all with this setup as opposed to the front mounted VVT cam angle sensor. Access to the remaining 2/3 is not ideal, either. https://i.imgur.com/Xl9gXMJh.jpg https://i.imgur.com/vbpEs0A.jpg Drivetrain fully installed with catback https://i.imgur.com/ysRsapuh.jpg Another bumper shot bc non-stock bumpers are good https://i.imgur.com/dtTtqR8h.jpg |
In the month or two that passed between acquiring the car and getting the motor in, I had taken a look at the wiring and realized that the fact that it was a custom harness sheathed in DR-25 meant for an AEM Infinity and a turbo VVT motor with boost control, I wouldn't be able to use much of the wiring harness that came with the car that tblakey worked so hard on. I also had gotten into some scope creep and ended up with a Haltech Elite 1500 (mistake) to replace my outgoing MS3 Pro. I had seen the Nexus R3 and didn't want to spend the extra money it would cost to get a VCU instead of a regular ECU/fusebox combo. In hindsight, I would absolutely have gotten the R3 to cut down on wiring time/complexity.
With the ECU purchased and motor installed with pretty much all sensors chosen, I got to work on a wiring diagram/pinout table. I purchased the HP Academy Clubsport wiring course and ended up with this spreadsheet. Haltech Pinout For some reason, I included a bulkhead connector, a HD34-24-47 47 position budget bulkhead connector typically meant for industrial equipment. This is much cheaper than the motorsports grade Autosport or Souriau connectors but still utilizes the standard solid Deutsch pins/sockets. I also chose to use TXL wire for everything except the shielded position sensors for the crank, cam, knock, and VSS (not sure why I chose shielded for the VSS tbh) where I utilized PN: M27500/20SB3T23, 3 conductor shielded MS22759/32 Tefzel wire for smaller cross section. I also have some Eaton non-bussed fuse boxes with Type 2 circuit breakers (again, I'm not sure why I did this. I think I was just browsing the Waytek catalog and was just like "ooh this is neat") in the system. I used some nylon rope to mock up the harness in the engine bay and interior to determine harness lengths. https://i.imgur.com/0HHixR0h.jpg https://i.imgur.com/p4b2ZWrh.jpg Had to take a work trip down to Carlsbad and I brought my rope harness to translate rope lengths into excel cells. https://i.imgur.com/Tn13cH9h.jpg https://i.imgur.com/RjzP3a3h.jpg |
Took over a spare desk at work and started harness construction.
https://i.imgur.com/PNLoJlEh.jpg https://i.imgur.com/hHuRiz4h.jpg https://i.imgur.com/tzStiLzh.jpg https://i.imgur.com/WG33gP7h.jpg https://i.imgur.com/plWqCaMh.jpg https://i.imgur.com/z3gJu95h.jpg Also printed a mount for 2 fuse boxes that utilizes the stock dash mounting spot. https://i.imgur.com/6B9bv9Ph.jpg Mounted the Spartan3 CAN wideband O2 controller as well. https://i.imgur.com/MABR62yh.jpg |
Wiring sucks, but as I was slaving away at that, I kept working on some easier mechanical fixes on the car that needed to happen.
Installed BroFab front hubs https://i.imgur.com/F2PeRb8h.jpg Replaced front upper ball joints with Supermiata units https://i.imgur.com/I8LxZj9h.jpg Installed a Works Bell hub and Krontec QR. (again one of those "ooh this would be nice to have" moments of weakness) https://i.imgur.com/0tllKbzh.jpg Spacer test fitment https://i.imgur.com/nTLIC30h.jpg https://i.imgur.com/pdULUS4h.jpg Retrofitted fuel pump hangar with AN -6 fittings and a wire grip so I wouldn't have to rely on the aging stock bulkhead connector. I suspect my first motor died due to fuel starvation caused by the plug not being seated properly after being in a high vibration environment for 200k+ miles so this is something I do automatically now. https://i.imgur.com/j6TlA7Bh.jpg Existing AN -6 fuel lines weren't PTFE lined so I was getting some pretty bad fuel leakage through them, so I replaced them with PTFE lined hose. I don't have a pic of the installed new hose under the car, but you can sorta see the fuel leaking in this pic. https://i.imgur.com/MabWwxWh.jpg Also used regular EFI quick disconnects in the engine bay side so I can empty the fuel tank using the fuel pump if required. I messed up the lengths, so I'll come back and shorten them up a bit and tidy up the fuel lines at a future date. https://i.imgur.com/ngU0XNSh.jpg |
By this point I had blew way past my original deadline of Miata Reunion, so I'm just working on the car as much as I can without getting discouraged.
Installed a fresh set of Xidas. (Only single adjustable, I'm not baller enough for triples yet) https://i.imgur.com/eC3NXDqh.jpg A Kazespec K10S element with uprights I designed. The aero package will definitely be iterated on as I'm not a huge fan of the aesthetics currently. https://i.imgur.com/WTf3QGkh.jpg Car almost fits under a 177" hatchback car cover off Amazon, close enough. https://i.imgur.com/yRXPE2kh.jpg Car can't be too serious. https://i.imgur.com/ZACq5Elh.jpg Mounted a Cartek rain light to an eBay carbon license plate blank that will be framed with a bedazzled license plate frame courtesy of @_slowboi https://i.imgur.com/HhNNeenh.jpg |
Jeeze dude, epic. I can't believe you scooped up that car, one of my favorite miata's ever, or at least in more recent history. And from the looks of this thread you are going to do it justice!
Following! |
Originally Posted by Fireindc
(Post 1644350)
Jeeze dude, epic. I can't believe you scooped up that car, one of my favorite miata's ever, or at least in more recent history. And from the looks of this thread you are going to do it justice!
Following! |
Mounted the rain light, just the right amount of unseriousness.
https://i.imgur.com/yyjxEuNh.jpg Rain light in operation. 4hz flashing when turned on, and always operating as a static 3rd brake light Mounted a Sabelt X-Pad for the driver's seat with a Schroth Flexi 2x2 harness. OMP HTE-R 400 in the passenger side, still need to finalize mounting for that as well as the harnesses. https://i.imgur.com/ikVk1m1h.jpg https://i.imgur.com/ogu8pO9h.jpg Finally labeled the dash buttons as well as the changed items on the ARC-8000 panel. I did an absolutely terrible job at cutting the labels out, I'll maybe fix that at a later date if I care enough https://i.imgur.com/xz8TkHsh.jpg Will probably need to redo the dash mounting since it's really off-center. Potentially bring it close so I can see all the rev lights as well. https://i.imgur.com/UyomvR0h.jpg |
I decided that I didn't want to live with an off-center dash, so I whipped up a bracket in OnShape and had Oshcut cut/bend it. As an aside, I would definitely recommend OnShape to casual hobbyists as it is free and relatively intuitive. I've been using Solidworks for a couple of years now, and my overall workflow isn't largely different between the two software packages. I'm using my work's Solidworks license, so I wanted to try OnShape as a free alternative if I ever change jobs and lose access to a Solidworks license. Also decided it was probably a good idea to not be completely bound to one CAD software.
https://i.imgur.com/g1ooLLmh.png I would have used a Singular mount, but they don't have an OTS solution that works with a Race Technologies dash, so I just copied their overall design with some eyeballed dimensions. The fitment out of the box isn't perfect, but after a couple of minutes with an angle grinder and some bending, it fits relatively ok. Might make another iteration in the future if I have some cash to burn or it really bothers me. Would prefer the dash to sit a little lower and closer. https://i.imgur.com/YbanQR7h.jpg https://i.imgur.com/oJRXfKTh.jpg https://i.imgur.com/xthH9Weh.jpg The wiring in the engine bay is also installed, and most components are installed. The intake is a temporary solution for now, it will be iterated on before the first dyno date. I think this was just something we threw on in the past so there was an intake at all. I'm also getting a batch of M10x1.25 to M8x1.25 studs produced so I can mount my Bosch knock sensor to the stock knock sensor position. If it fits, I'll have a decent amount of extras so I'll probably list those for sale. https://i.imgur.com/wvE2nkQh.jpg Used my old Setrab 6 Series 19 row core to make mounts for this car. This core has experienced a blown motor so I have a new core ordered and otw. Will add some oil cooler ducting as well as some more vibration isolation. If the cooler ducting fits well, I'll also probably have a batch made and for sale as a universal kit for 6 series 16-25 row coolers. https://i.imgur.com/OEm1L09h.jpg |
Not too much has happened lately, but the car is at twibs415 shop now for some help from someone that actually knows what they're doing. Thanks to slowboi for the tow as well. Working on getting my own trailer, but I'm just bumming rides off friends for now.
https://i.imgur.com/tLi1hfTh.jpg https://i.imgur.com/DkveYO0h.jpg https://i.imgur.com/jslZoQPh.jpg https://i.imgur.com/oUJSQ5Nh.jpg https://i.imgur.com/WGo9NuRh.jpg Car isn't lowered yet, but fitment should be relatively good. https://i.imgur.com/dLmqWTkh.jpg https://i.imgur.com/2L3dkVmh.jpg |
| All times are GMT -4. The time now is 03:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands