flounder

You need some gold fuzzy seat covers and those dingle-ball thingys for the hardtops headliner. And an airhorn.

hustler

iTrader: (6)

Why do I love this car?

99mx5

iTrader: (16)

Because you can park it, slam the door with the window open and not look back. And when you return, nothing has happened to it.

I feel the same way about my beater miata.

FRT_Fun

iTrader: (19)

I can't wait to get a beater miata.

pusha

iTrader: (5)

I'm going to start driving mine soon. I can't wait.

hustler

iTrader: (6)

I now have 600/400 springs and although a little tighter on the street, it's still smooth and comfy. We had to up the spring rate to get the ride height.

hustler

iTrader: (6)

This car with the baller shocks passes the Houston test. I think the highspeed damping is better with the heavier spring for some reason, the ride is smoother the faster I go.

hustler

iTrader: (6)

Update:
MS2+ is paid for.

Question:
I have a VVT engine...What should I do about intake plenums and throttle bodies?
I have a 2001 plenum with IAC and t-body
I have a 1999 plenum with no IAC and no t-body
I have a1994 IAC and t-body that does not work.

Right now I'm hoping I can use the 1999 plenum, 2001 T-body, and 2001 IAC valve. Tell me this is possible.

Also, what is the best route to go for a fuel rail on my 1995 car? I have a 99 fuel rail, 2001 fuel rail, and I think the best option will be to buy a dual feed. This way it will be easier to use a real fuel pressure regulator instead of jacking with that fuel damper ----.

Reverant

iTrader: (10)

Use the 99 intake with the 2001 TB/IAC/TPS.

shuiend

iTrader: (24)

I use a 99 fuel rail with the flange up front along with the stock 94 fuel pressure regulator. It has been working fine for me. I have seen no reason to change it. On your DD, a dual feed rail sounds way over the top.

FRT_Fun

iTrader: (19)

This thread is ruining my plans to get a daily with more than 2 seats.

hustler

iTrader: (6)

Do you have pics? I am interested in the M-Tuned rail only because I know it will fit (after trimming) and it won't require me to get anything fabbed-up. I'm trying to minimize cost on this car because I just dropped $250 on new window regulators and $100 on a battery.

hustler

iTrader: (6)

I need a bigger car but I cannot deny the utility of owning more than one Miata (stocking replacement parts), fuel economy, reliability, agility around town, and fun of tuning another car and getting more fuel economy out of it.

I had the displeasure of renting a larger car last week, and driving around New Orleans with it. The small Miata is better in every way in and out of traffic, parking, and RWD fun-time. It had been a while since I rented a car and had to drive it for a week, the Miata really is significantly better around town.

trickyrix

You can come look at mine... or, if I can find it, I'll post that bit from a '99 head swap writeup I have. The NA regulator swaps over to the NB fuel rail with no fuss.

I had to drive my aunt's Camry this morning and I forgot what a soulless, lazy, vapid, beige appliance it is. It's Idiocracy on four squishy tires.

gearhead_318

iTrader: (1)

This thread interests me.

hustler

iTrader: (6)

Don't you have the gay "fuel damper" on yours? I'm partially temped, and I mean partially, to doing a Fuelab regulator on my daily, but that's $160 + about $75 in fittings.
Hell yeah, ----------er.

Also, does anyone have a naturally aspirated VVT table? Has anyone determined the "prime" table for VVT on an NA engine? Shouldn't they be the same considering we're all using the same cam? I hope someone on MS3 has already done this (which uses VVTuner "internally") rather than running VEAL on one computer and VVTuner on another with MS2 so I can keep target AFR in check while adjusting cam angle.

I still need a CKP and CMP sensor for the VVT engine. PM me with prices. They're $60 each from Mazdaspeed so keep that in mind.

MD323

This will be a handy thread when we put a similarly built FWD BP in my friends daily 2001 protege.

trickyrix

Yeah I've got whatever regulator/damper comes on a '94. It swaps straight over to the '99 rail and it's been working just fine. The main thing is that it's cheap and everything fits and works like stock.

jasonb

dood, put this and change the title to 65mpg/200whp super commuter.

ooohhhhh there's gonna be a beating tonight

hustler

iTrader: (6)

Lets talk about reliability problems. I bought this car in 2007 with 86k miles. It looked bad. I've already replaced every hose in the car now this week was rough.
In a span of three days I had some problems:
Broken window regulator
dead battery
dead ignition switch
dead window switch
bad "new" window regulator
tragically leaking rear caliper
and now today, on the way to work, broken header.

I think its time I pulled the engine and swapped-in the swap motor, but money is the problem. Its time to do it right if I'm going to keep it, I cannot afford to buy a nicer car so we're going to keep this one.