My new build. Now finalized and no dibs accepted!
turbo:
- BEGI-SSM + GT2560R + Separated gases ss down pipe (ordered) - CX-Racing intercooler (DIY - have) - Forge bypass valve (have) - Piggyback MegaSquirt I PCB 3 w/ EBC, LC-1, and KnocksenseMS (have) - RX-8 420cc injectors (have) - ISC Racing 2.5" exhaust (need) - 2.5" M-Tuned cat (need) - 2.5" Magnaflow resonator (need) - 2.5" Magnaflow muffler (need) - Snow Performance stage 2 methanol kit w/ upgraded solenoid (getting it next week in a trade) brakes/drivetrain: - 1.8L brakes (have) - braided brake lines (have) - 4.10 1.8 rear end w/ KAAZ 1.5-way (have) - ACT 6-puck unsprung 1.6L disc + Centerforce PP (have) chassis/suspension: - Tokico Illuminas (have) - FCM top mounts and bump stops (have) - Swift springs (need) - RB tubular front sway bar (have) - Energy Suspensions bushings (have) - FM frame rails (have) engine to-do list: - engine re-fresh - stock pistons w/ performance rings - M-Tuned rods - Supertech +1mm valves - minimal head polish (removing casting imperfections) cooling: - oil cooler (DIY - need) - better radiator (need) - radiator and intercooler ducting (DIY) safety: - Advanced Autosports cage (need) - Netami CF seat (installed) - 5-point harness (have) shooting for high 200s... hoping for 270-280whp at 15psi for track and minimal wastegate setting for street (EBC kill switch). |
Shoulda had tim build you a manifold and downpipe. I'd have bought that back from you in a heartbeat.
|
i tried to get ahold of him but after 2 weeks of waiting i gave up.
|
Rules say you have to post a price.
EDIT: Whoops, thought this was a F/S ad. :) I still got 2 oil coolers, pick one. |
We need a poll on "who thinks he will finish it"
|
me? finish? hahahahaha!
|
Originally Posted by UrbanSoot
(Post 320398)
i tried to get ahold of him but after 2 weeks of waiting i gave up.
I still have all my PM's going back to the beginning of March, nothing from you. No emails either. No bid deal. BEGI is good for you. |
Will be watching the 'for sale' forum.
Looking forward to a good deal on the sway bars and shock mounts. |
Originally Posted by TurboTim
(Post 320567)
?!
I still have all my PM's going back to the beginning of March, nothing from you. No emails either. No bid deal. BEGI is good for you. PS: update!!!! upgraded to GT2860R ;) |
got my first quote for engine build. $1700 without parts.
- full balance - micro polish crank - 5 angle exhaust vlaves - 3 angle intake valves - head bowl port |
did you need to replace anything, such as orings or spacers to make the RX8 injectors work
|
nope... they are a bit longer but otherwise fit fine
|
updates...
turbo:
- BEGI-SSM + GT2860R + Separated gases ss down pipe (ordered) - CX-Racing 25x12x3 intercooler (DIY - have) - Forge bypass valve (have) - Piggyback MegaSquirt I PCB 3 w/ EBC, LC-1, and KnocksenseMS (have) - 750cc injectors (need) - 2.75"-3" exhaust (need) - Coil-on-plug conversion (need) brakes/drivetrain/wheels/tires: - 1.8L brakes (have) - braided brake lines (have) - 1.8 rear end w/ KAAZ 1.5-way (have) - ACT 6-puck unsprung 1.6L disc (have) - ACT flywheel (need) - ACT XT PP (need) - 6 speed tranny + 3.3 gears (need) - 15x7 5zigen FN01R-C +33 offset w/ 225/45/15 Toyo R888 (have) - 14x7 Konig rewind (have. need tires) chassis/suspension: - Tokico Illuminas (have) - FCM top mounts and bump stops (have) - Swift springs (need) - RB tubular front sway bar (have) - Energy Suspensions bushings (have) - FM frame rails (have) engine: - engine re-fresh - Supertech pistons (need) - M-Tuned rods (have) - minimal head polish (removing casting imperfections) - Mazdaspeed engine mounts (need) cooling: - BEGi coolant re-route (ordered) - oil cooler (need) - Koyo radiator (have) - radiator and intercooler ducting (DIY - need) - Beatrush belly pan (have) safety: - Hard Dog standard cage (have) - Netami CF seat (installed) - 5-point harness (have) body/interior/exterior: - Front lip (need) - Rear lip (need) - Hardtop (have) - Paint refresh (need) |
I still got an oil cooler. Ignore me like normal.
And what the hell one day you're buying a built engine, now you're building one? Or you already buy and sell the one you bought? |
nah... guy seemed flaky - i didnt trust him enough.
|
fuck megasquirt! haltec or aem?
|
pics?
|
AEM, I've never been a fan of the haltec software. the aem is also more popular so the odds of finding a base map are better.
|
Originally Posted by UrbanSoot
(Post 336083)
fuck megasquirt! haltec or aem?
|
now if someone was to build me one;)
|
All times are GMT -4. The time now is 10:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands