1 Attachment(s)
|
1 Attachment(s)
I thought I was getting close til I starated making a to-do list. :( anyone see anything I missed?
Attachment 183293 |
Yesss. More updates please.
|
1 Attachment(s)
My turbo outlet flange and clamp came from pure diesel performance today. I might get the exhaust started this weekend
Attachment 183291 |
3 Attachment(s)
ive decided to go with a 1987 S-10 Blazer fuel tank. its cheap, it fits between the frame rails, and it uses an intank pump. again ive tried to order the direct fit straps and nothing fits so im making all of my own mounting hardware out of some square tubing and 2" strap steel.
it took longer to square and level the tank in the frame than it did to make the upper brackets. im going to use some rubber hose slipped over the strap to protect the tank. Attachment 183242 Attachment 183243 Attachment 183244 |
5 Attachment(s)
Busy weekend. Finished mounting my fuel tank, finished my shifter, got my escort ZX2 center console mocked up, and found a throttle body.
Attachment 183229 Attachment 183230 Attachment 183231 Attachment 183232 [img width=337 height=600]http://i271.photobucket.com/albums/jj146/aintnobitch/courier/20160905_134305.jpeg[/img] Attachment 183233 [img width=337 height=600]http://i271.photobucket.com/albums/jj146/aintnobitch/courier/20160903_165009.jpeg[/img] |
I saw one of these on the road the other day.
it is SMALL! like, the miata equivalent of a truck small. |
I want wheelies!!!
|
Awesome work!
I have a b2600i and have mulled tinkering with the fe3. Does the fe3 block mount to the b2600i trans cleanly? |
I also want wheelies lol
|
Depends on year, if it's 88-93 (G6) block it's the same a pattern as the FE3N
|
Self esteem... dying...
|
Originally Posted by 18psi
(Post 1358990)
I saw one of these on the road the other day.
it is SMALL! like, the miata equivalent of a truck small. https://cimg4.ibsrv.net/gimg/www.mia...73ce83938e.jpg |
:bowrofl: one of these days, I promise
|
4 Attachment(s)
i had to move the truck to a different stall at work than it usually goes into and i found that the tires rub the cab now that have the spacers on them. the spacers need to be there and im sticking with 245/40/17s all around so i had to do some more cutting and welding. i used some thicker 16ga to keep it from distorting when my fat ass pushes on it to settle in my seat. i was worried that it would take up more of my limited leg room but the little extra isnt noticable
Attachment 183207 Attachment 183208 Attachment 183209 Attachment 183210 |
1 Attachment(s)
It looks so plain with the hood on. I guess it will work in my favor for sleeper status...
Attachment 183113 |
Nice :bigtu:
|
double post
|
7 Attachment(s)
i started on the hvac. after a lot of looking around i decided on using all of it out of a 2001 kia sephia. cheap to replace, lots of them every where and the size of everything seemed about right. im going to be putting the evap and heater core in a custom box that is gonna make up the front of my center console. i didnt want to take away from the tiny bit of space that my passengers have to put their feet.
so far i have the blower motor mounted. fresh out of the junk yard for $60 Attachment 183089 Attachment 183090 massive evap. should keep my cab nice and chilly on those 100*+ days Attachment 183091 heater core is alot smaller but i have heated seats so im not worried. Attachment 183092 Attachment 183093 i didnt take pics of the mounting but there is a 10ga plate that is welded to the underside of the cowling with studs in it to bolt the blower to. that blower pushes a ton of air. im building a box that will cover it and hold a cabin filter. Attachment 183094 Attachment 183095 |
4 Attachment(s)
finished my hood latch support. it works, just need to grind the welds and make it pretty.
Attachment 183049 Attachment 183050 Attachment 183051 Attachment 183052 |
All times are GMT -4. The time now is 11:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands