Pat's fruity two seater beater
8 Attachment(s)
Mod List as of 3/14/11
Hard Dog Hard Core M2 Double Diagonal Roll Bar Monsterflow intake (for an NA, modified to fit my NB) Momo Drifting steering wheel w/NRG short hub Racing Beat front endlinks Removed rear sway (had to, endlinks were rusted so bad I had to cut them off, haven't replaced them yet) Motegi Traklite 15x7 +35 w/Federal 535 205/50/15 XXR 521 16x8 +20 w/Falken FK452 215/40/16 Raceland Coilovers Some random shift knob Foamectomy on the driver's seat (still too high, more will be removed) Day 1: Bone stock with 119k on the clock and in desperate need of an oil change, and a buff. Attachment 190449 Stoked face Attachment 190450 Shortly after: Buff, wax and oil change complete along with a borrowage of the other miata's hwheels. Attachment 190451 Racelands and sportmaxx, flame away! (xxr 521, 16x8 +20) Attachment 190452 Attachment 190453 MOTORSPORTS! Attachment 190454 Goin legit homie... Now sportin a hdhcdd roll bar, momo wheel w/nrg short hub and after I find some tires, these for my motorsports endeavors :giggle: Attachment 190455 Attachment 190456 As is obvious, I haven't gotten into a motor build yet. Eventually it'll happen after the funds come along and I've taken care of everything else I consider necessary. |
Maybe its just the pics, but those sportfags look pretty good on that car actually.
New rims are so much better though |
Oh you're the guy from the NW thread on cr.net. What width are those new wheels, and what is your tire going to be?
Any power goals? |
18psi I had that wheel design (mesh with some lip) in mind from the day I got it and with my lack of budget, the sportmaxx seemed tits.
Curly, yeah I'm that dude haha. The traklites are 15x7 +35. I'm looking for some used slicks or I'll get something along the lines of kumho xs or star specs. 205/50/15. Not sure about power goals. Likely going the boost route. After a basic setup I'll probably get power hungry |
I have some R888s if you want to come to Oregon City, probably not though.
|
Originally Posted by gc8pat
(Post 700405)
Build thread? Let's do this.
I bought the car last summer in Seattle. It looked kinda like doo doo when I picked it up. There was no shortage of oxidized paint. Day 1: Bone stock with 119k on the clock and in desperate need of an oil change, and a buff. http://i232.photobucket.com/albums/e...%20NB/Day1.jpg Good job cleaning up the car. |
Mowed down at subway like it was my final supper.
How much ya want for the r888s? |
$75, but they're not worth it to ship. Are you actually in Montana?
|
Yeah I'm in Missoula. How much tread is left? I may snag them if I head out that way soon.
|
Not much, they supposedly only have two SM races on them, they're slicks, but with plenty of track days left on them.
|
1 Attachment(s)
Traklites are on! I had some federal 535's in the garage and since I can't afford a new set of tires at the moment, I had them mounted. I think I'm going to go a little lower, but I like the more business stance that it has now. First pic posted of the rollbar and steering wheel too.
Attachment 190381 |
Ride height looks great, don't go any lower.
|
I love the tracklites! Just be careful if it's your DD, a buddy of mine had his bend from pot holes.
|
3 Attachment(s)
I autocrossed a few times on the federals and they were surprisingly not all that bad to drive on. If they got too much heat they felt like pudding though. The last event I skated all over. Since then I've had my eyes peeled for a good deal on some used slicks and got very lucky today. Picked up a set of 13x8 +4 Rota RB's with 20x9x13 Hoosier R25's on them, as well as a second set of R25's and a pair of R35's, all with quite a bit of life left. The deal also came with some brand new 6 inch wide R45's but I think I may sell those to recoup some of my expenses. Also planning on selling the Traklites. Here was my poor subie today, stuffed with 4 wheels and 12 slicks haha.
https://www.miataturbo.net/attachmen...ine=1313994052 and my glorious purchase stacked up in the garage. https://www.miataturbo.net/attachmen...ine=1313994052 I've also got a set of Tein HA's that need to be cleaned up, then they will go on as well. Everything should be ready to go for my next autocross in 2 weeks. So excited! Since my last post I've also put red tint over the amber part of the tails to make them all red and clear. Looks much better IMO. Had a 2.25" catback made as well. No muffler, just a resonator right after the flange. Has pretty much 0 rasp and isn't hellishly loud either. https://www.miataturbo.net/attachmen...ine=1313994052 |
Uh-oh... The 13's are for the NB? Did you test fit them?
|
I like seeing cars brought back from faded fail.
|
4 Attachment(s)
The 13's are for the NB. I don't have sport brakes and from what I had read, the 13x8 +4 fit just fine. Test fitted them today to be certain and they fit great. I do believe I'll need a fender roll before the car's ready to run with them.
Here's how it looks on them. BEEFY! https://www.miataturbo.net/attachmen...ine=1314071738 https://www.miataturbo.net/attachmen...ine=1314071738 https://www.miataturbo.net/attachmen...ine=1314071738 https://www.miataturbo.net/attachmen...ine=1314071738 |
she looks good those are some wide tires!
|
1 Attachment(s)
The wide hoosiers are mighty effective!
https://www.miataturbo.net/attachmen...ine=1317608575 My first FTD and I wound up #1 in PAX as well! I was 2nd in PAX and 2nd in raw times my first event on the Hoosiers also. I love these things! I wound up getting 3rd in PAX on the street tires (traklites and federals) and 8th in raw times last weekend also. I've learned a lot this season and can't wait to come back next season with an even better setup! |
You must run with a small club. No near stock Miata will ever FTD in the Tennessee Valley Region, lol.
|
All times are GMT -4. The time now is 10:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands