Shuiend blows motor #5; Naturally Aspirated Glory Incoming
#923
Elite Member
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
You might need to modify the frame rail since turbine housing might bump. Also may need to modify the shelf on the trans tunnel.
For the modifications, I recommend use of a, ah, well, you know what I recommend.
So yes.
For the modifications, I recommend use of a, ah, well, you know what I recommend.
So yes.
#936
mkturbo.com
Thread Starter
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
It does not fit in all as one piece. Gets stuck a little after the flex joint. I got most of it installed now except for the down pipe. I can not get it attached by myself for the life of me. Hopefully my friend can come over tonight and give me a hand.
#937
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Any tips for affirming a good seal on all joints? I always do mine alone. I had a really tough time with my wastegate and I'm not sure it's sealing. I don't see any black-stuff on the surface though.