soviet

iTrader: (10)

lolno I'm way better with power tools than that

Leafy

iTrader: (1)

I said clarkson not fae

18psi

iTrader: (76)

I don't recall him ever suggesting anything smaller than Borgwarner s366

soviet

iTrader: (10)

its kind of true actually.
google voice is glory for pulling out old-*** text message conversations.

Braineack

iTrader: (62)

see if it was me, id just clamp some silicone where it hits and be done with it.... oh wait.


I'll listen to Fae when he actually proves he knows what he's doing, so far ive seen him at the dyno 5-6 times now and not impress me much.

soviet

iTrader: (10)

I saw 3 people huddle around Lars's car on Ed's dyno with **** results, your point?
I'll be tuning my car myself, I just take Fae's advice as a guideline.

I already tried silicone there and it lasts like 3 miles. To me its in the same category of "fixes" as jb-welding things. No thanks.

Faeflora

iTrader: (2)

Yah whtever. Frankly vlad, your subie tune was pathetic. Timing, throttle, scaling etc. I do appreciate you sharing, but when it still sucked.

It was also pathetic that you had a big ol gt30 and only made 300hp. On cheater e85. I made 400hp on pump my very first car build ever and this is how many builds for you? So suck it.

Congratulations on trolling me, you win. Your constant baiting is annoying and ignorant.

His timing up top is 4-5* off what i ran on the street with my gt30 and no knock. I didnt just cavallierly send my friend some risky map. Anyways, he should indeed be able to squeeze out more power towards redline. Pretty much more power everywhere. Safely.


Eat diks. I respect your influence on the miata community but when it comrs to power i made more on my first dyno day ever (230hp) on eds dyno. You have your knowledge pool and i have mine. Tuning is not even hard at all, assuming you have a knock sensor and log and watch your afrs. Gimme a break. Also stop havig double standards about retardism. It is lame considering your own damn avatar finds humor in retardation.



I think that everyone has a mix of good and bad advice.



No, you havent. Me trying to start my car with a jumped timing belt does not equal tuning. Also. There is a reason why i have not blown up my motor. I actually learned how to tune meticulously from JayL. I also learned a lot from Phil at Element Tuning. When I tune power I look at every log after every pull. And have my real time knock readout up. And a knocklite. And a rolling log of my afrs.

Blah. Haters

Faeflora

iTrader: (2)

And since soviet posted it, does anyone have any real criticism of the timing map i made. I havent seen any. Just dumbassery.

Braineack

iTrader: (62)

IVE SEEN YOU!!!!!!!!!!!!!!!!!!!d

soviet

iTrader: (10)

fixed the muffler issue by ghetto-fabricating a 'clip' thing to prevent the muffler hangers from sliding (poly hangers are smooth and hanger thingys slide with ease).

raised boost by ~2psi. still no knock. was able to spin wheels in 3rd, though. these are 7 month old 205/50/15 star specs, lol.


today vs yesterday.

I have a strange issue where boost drops off from 6000 to 7100 or so and just before redline it comes back to normal. You can see above that turbine speed doesn't change at all - completely flat (sensor01)!

curly

iTrader: (25)

Soviet's build thread is Soviet's.

Leafy

iTrader: (1)

Might just be hitting a weird part of the compressor map or something. Looks like when you upped the boost the dip got wider.

Braineack

iTrader: (62)

what's controlling boost? mbc?

pusha

iTrader: (5)

hopes & dreams

soviet

iTrader: (10)

Went to strip for first time in my life, ran about 5-6 times. Best run was a 12.715 @ 115mph and 2.065 60ft. NT-01 are a lot better than expected and the grip available at the strip is insane! I got my best time by launching in 1st @ 3500 rpm. Launching in 2nd would stall the car (vs spinning wheels on street). I could definitely improve on the launch because car would bog to 2k rpm....

And shifting. Looking at the log my shifts were all 4-500ms WOT-to-WOT. So I spent 1.5-2 seconds outside of WOT just shifting....

2 failures - fat wire that goes to alternator came loose and the coolant reroute pipe almost slipped leaking coolant. Tightened the alternator nut and going to order a real coolant pipe with rolled bead.

open-loop EBC because I haven't tuned closed loop.

18psi

iTrader: (76)

115 mph trap is about right for 300whp. Good stuff. Any vids?

soviet

iTrader: (10)

nope, was too pre-occupied.


300whp sounds good!
Because of the boost drop from 6000-7000rpm effective boost was only 17psi vs 20psi everywhere else in the rpm. I'm going to dyno at like, 25psi.

thenuge26

iTrader: (2)

A fan of A Song of Ice and Fire? I did not expect that from you Fae.

Braineack

iTrader: (62)

There's a few key members in this thread that need a good ban...

soviet

iTrader: (10)

awww you deleted posts :(

anyways I'm going to try to tune closed loop EBC tonight. Open loop is just way, way too simplistic.