Faeflora

iTrader: (2)

I wonder if this is some kind of hidden statement. Fitting the biggest man around into the smallest cabin.

soviet

iTrader: (10)

ok car scares me now.

did same thing tonight. raised boost, tuned boost control a bit, did some pulls

• somewhere around 260-280kpa I can spin 4th gear. sure it's quite cold outside but GODDAMN
• 5th gear I hit... wait for it.... 275kpa at 3500rpm. That's 25psi @ 3500rpm.
• let me repeat that. 25psi @ 3500rpm
• I was going to raise boost to 270kpa but stopped at 260 because, really, I'm scared
• Pistons are still in block, no holes appeared
• There is still a small dip in boost but the difference now is less than 2psi between high and low.

Ryan_G

iTrader: (8)

Baller status has been officially achieved. You should see what it takes for you to break 400rwhp even if you do not leave it there. You have 3.63's right?

18psi

iTrader: (76)

Baller status will be achieved when he re-dyno's it on the same dyno he did before, but I gotta agree: WOW! that aint no joke. A buddy was spinnin 4th with 360whp on a super laggy 35r, I can't even imagine similar power but hitting peak boost at 3500..That's just nutty

Braineack

iTrader: (62)

That's just insane, cant wait to see/drive in this tomorrow.

thenuge26

iTrader: (2)

Seeing this makes my wallet cry. I was hoping I could be satisfied with a T25, but seeing this makes me want to just build the engine from the start...

18psi

iTrader: (76)

These things should come with a disclaimer: "built shortblock MANDATORY"

99mx5

iTrader: (16)

Nice job Leonid!


What Vlad said +1000000000...

Braineack

iTrader: (62)

and test pipes.





had to say it. low-hanging fruit.

soviet

iTrader: (10)

No I wish, just 3.9s. weather is kind of chilly (~55f last night) so i'm sure my star specs aren't as sticky as they could be.

I might bump it another 10kpa.

18psi

iTrader: (76)

just run ALLOFIT

thenuge26

iTrader: (2)

Turbo should be good for 400+ right? Gotta try to hit that at least once, even if you tune it back to 25psi after.

bcrx7

iTrader: (5)

Wow! ALLOFIT does sound good! 400WHP should be at around 28-29 PSI!

Braineack

iTrader: (62)

leniodator, can we race and film it?

18psi

iTrader: (76)

PLEASE PLEASE PLEASE

do this.

I'm serious. Go-Pro that race, I want to see the rape.

Braineack

iTrader: (62)

go-pro?

I'll use my dslr.

soviet

iTrader: (10)

Really don't think I'll need that much boost. I just need to keep the TQ going to redline. I already made 290ft/lbs last time but it dropped off. If I can keep it going, power will be ez. This time I have a bigger turbo, more boost, better timing control, better coils and a better timing map. I'll also tune my fuel to make sure it doesn't go rich in load like it did last time.

Borg Warner says turbo is good for 490 crank hp.

Scott sure we can film it

Faeflora

iTrader: (2)

In for epic

soviet

iTrader: (10)

Tuned up to 270kpa (24psi) - holds it to redline. Weather is cold so I have no grip - meaning wheel spin in 4th reliably happens now.

Fuel is good. Boost is good. I hope boost control works same on dyno as it does on street (i.e. that I don't have to **** with PID on dyno).
Timing is good (11-12* @ 270kpa where peak TQ should be). If I'm really not happy with dyno result, I'll bump timing up 2*.

Max fuel duty cycle is 82%. Go stock fuel rail go!!!! lol. Knock looks fine. Spark is fine (no misfires). Crank pulley hasn't sheared yet.

Dyno in 7-8 hours!!

18psi

iTrader: (76)

Very nice. Are you on pump 93?
for the 100th time, please don't forget to record as much as possible