Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Build Threads (https://www.miataturbo.net/build-threads-57/)
-   -   TSE EFR NB2 Build Thread (https://www.miataturbo.net/build-threads-57/tse-efr-nb2-build-thread-90239/)

icantlearn 11-04-2021 04:33 AM

4 Attachment(s)
The "low" setting is at 50hz. "high" is at 150.

Turning off flex seemed to fix the issue up until today. I took the mid pipe off to make some adjustments and now the car runs like its on 2 cylinders. Barely starts and will only sorta run for a few seconds before dying. I don't really know how this is possible. The 02 shouldn't be pulling a vacuum at this low of an rpm/cranking.

Logs attached.

Attachment 225864
Attachment 225863

afm 11-04-2021 10:31 AM

Check your grounds.

icantlearn 11-05-2021 12:13 AM

grounds all look ok. Spark test modes check out. plugs are soaked. So.... confused.

icantlearn 11-06-2021 07:15 PM

Car runs now. I suspect one of the plug boots might have popped out. The only thing I did was pull plugs for spark output test mode to confirm I had spark. It checked out so i out it back together and it fired up. :dunno:

icantlearn 11-19-2021 10:03 PM

Ok so I think the plugs just fouled out from all of the cold starts the car has been through. It runs pig rich when cold so I should probably lean it out a bit.


All times are GMT -4. The time now is 12:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands