A year of build notes. With a racy ending!
A year of build notes/Ultimate how to ebay thread/Read the stickies/Dream the dream.
All would have been fitting titles for this build thread. This is a picture synopsis of everything that went into a year and a half 1.6 turbo build. Ill try to include as much info as I can recall for time and money spent for each step and general build progress notes.This is my second build, if you can count wheels and suspension a “build”. Before I did, now I do not. This was my first ever dive into FI, and the ride was wild. The dream: A racecar! https://farm3.staticflickr.com/2810/...156e0b4f_c.jpg 20160213_075019 by https://www.flickr.com/photos/149670502@N07/] Found down in LA on a local buy/sell group. Cons:blown headgasket, wont run, bad tires, bad paint, overall piece of junk. Pros:FM coils, wheels, clean title(somehow), eh?overfenders, overall piece of junk. I was looking for something that, when the time came, I wouldnt mind busting out the sawzall to get something to fit. Because I knew this was going to be that kind of build. Time:3 hours (LA Traffic) Cost:$1400 https://farm3.staticflickr.com/2844/...8a78dcee_c.jpg 20160213_102636_HDR by Tyler Swann, on Flickr First day wrenching, already got me. Either really good, or in for uphill battle. https://farm5.staticflickr.com/4167/...f581ae8f_c.jpg Message_1455408209459 by Tyler Swann, on Flickr Head out, visible damage to the gasket, but being broke from picking the car up, decided against machining head. First head gasket ive ever replaced. https://farm5.staticflickr.com/4192/...6d52175a_c.jpg Message_1455408235266 by Tyler Swann, on Flickr Bad gasket. https://farm5.staticflickr.com/4169/...bd3a2aec_c.jpg 20160214_153054 by Tyler Swann, on Flickr Realized how heavy solid metal is. Creeper was handy. Ended up doing timing belt while I was in it. Time:8 hours (Weekend) Cost:About $150 (Parts from local group and parts store) https://farm5.staticflickr.com/4182/...0311263b_c.jpg 20160219_174650 by Tyler Swann, on Flickr After getting the head back on, it wouldnt start. Went over and over timing. Confirmed spark. Confirmed compression. Tested fuel, no pressure. Opened tank to find lock ring for pump missing. Fuel tube and hose clamps. Started running first crank. Time:8 Hours https://farm5.staticflickr.com/4185/...214a0a88_c.jpg 20160220_101801_HDR by Tyler Swann, on Flickr Because racecar! Pull the guts out and trim that excess fat! (No HVAC, no tunes, nothing extra) Time:8 Hours https://farm5.staticflickr.com/4175/...0f6ed246_c.jpg 20160222_224703 by Tyler Swann, on Flickr Ghettotech exhaust hanger after part stores closed. Time:1 Hour https://farm5.staticflickr.com/4174/...e3ba26b1_c.jpg 20160226_072447 by Tyler Swann, on Flickr De-power steering rack. JB Weld in the banjo fittings. Power steering fluid is too heavy, and who really needs 2 accessory belts? https://farm3.staticflickr.com/2947/...00a80652_c.jpg 20160307_211445 by Tyler Swann, on Flickr DIY shift knob, first touch of personalization, and to set the DIY tone. Time:2 Hours Cost $10 https://farm3.staticflickr.com/2876/...3bda9c6b_c.jpg 20160307_211451 by Tyler Swann, on Flickr Dash removed, rust everywhere! But shift knob looks purdy! https://farm5.staticflickr.com/4175/...84c403d5_c.jpg 20160320_211026_HDR by Tyler Swann, on Flickr Racecars dont use keys, they use switches! Plus it will fill the gap where the radio/HVAC controls were. Time:1 Hour Cost: $25 https://farm3.staticflickr.com/2891/...8bb26851_c.jpg 20160322_130640_HDR by Tyler Swann, on Flickr https://farm5.staticflickr.com/4188/...6a808260_c.jpg 20160324_151127_HDR by Tyler Swann, on Flickr Big and small at work .https://farm3.staticflickr.com/2885/...ce5042e8_c.jpg 20160516_193607 by Tyler Swann, on Flickr Pulled the diff because the fill plug wouldnt budge. Decided to drill and tap, drill broke off inside. Gave me a chance to check it out. Done diffs before on my Jeep. Time:2 Hours https://farm5.staticflickr.com/4181/...2f143f64_c.jpg 20160619_232938 by Tyler Swann, on Flickr When pops needs to borrow the hooptie. Switches apparently done at this point. Noting around the wheel anymore. Hours upon hours of researching wiring diagrams and how to wire each switch appropriately. Time:12 Hours Cost: $10 https://farm3.staticflickr.com/2943/...18deccc8_c.jpg 20160826_183659 by Tyler Swann, on Flickr Picked up a rollbar. Hardcore double diagonal, with harness bar. Easy to install since there is no interior. Deided to do a DIY bikini top. Cheap autozone pedals too! New Wheel. BarTime:8 Hours (2 install, 6 pickup in LA traffic) Cost:$400 Top: Time:6 Hours Cost: Old top from prior bikini dreams Pedals Time:1 Hour Cost $15 Wheel Cost:$30 https://farm5.staticflickr.com/4173/...2c27303b_c.jpg 20160826_183713_HDR by Tyler Swann, on Flickr Decent enough for government work! https://farm3.staticflickr.com/2855/...c21ca6ff_c.jpg 20160919_112206_HDR by Tyler Swann, on Flickr Picked up an exhaust. Manzo with some HKS can. Time:3 Hours Cost $100 https://farm5.staticflickr.com/4183/...ee95085e_c.jpg 20161008_134330 by Tyler Swann, on Flickr Got out for a drive with co-workers. Nice little shakedown to actually drive the car. Sleepy LED bars Time:4 Hours Cost: $40 https://farm5.staticflickr.com/4185/...467d7212_c.jpg 20161019_233617_HDR by Tyler Swann, on Flickr Came time for the ECU. Prepping for boost a few weeks before I planned to have enough to start picking up go fast parts. Bought as an MS1, ended up being an MS2. Yay for local group buys! Decided that Shadow Dash on a tablet would be cool, so I hardwired a bluetooth Tx/Rx to the MS. Tablet as a dash is so racecar. Harness had been out for a slimdown at this point. Removed airbag sensors and wires, radio wires, HVAC wires. Rewrapped in electrical tape. Harness Time:6 Hours ECU: Time:6 Hours Cost:$200 Tablet Cost:$50 (Tablet) $10 (Hardware) Bluetooth: Time:1 Hour Cost $20 https://farm1.staticflickr.com/751/3...d78e8276_c.jpg 20161019_233629 by Tyler Swann, on Flickr https://farm5.staticflickr.com/4191/...4ece3a45_c.jpg 20161020_073535 by Tyler Swann, on Flickr Inverter to power AC tablet charging. 5 Panel mirror. USB hub for charging things n stuff, and also because racecar. Still want to get the CB in. Inverter Time 1 Hour Cost $20 Mirror Cost $25 https://farm5.staticflickr.com/4187/...e27d1269_c.jpg FB_IMG_1479774154256 by Tyler Swann, on Flickr Thats a big diffuser, and I want it! Local group find. Dudes DIY project. Sheet metal, unsure is actually does anything. BUT I WANT IT! Cost $50 https://farm5.staticflickr.com/4189/...5f88e00b_c.jpg 20161121_173134 by Tyler Swann, on Flickr Go fast parts start arriving. This is where things get really eBay. Those afraid, please stop here. Unable to justify spending bookoo bucks on name brand, quality parts, I decided to roll the dice on a plethora of janky turbo parts. Only looking for low to mid 200s for this build. T3/4 Turbo Compressor: Trim:55 A/R:.5 50.50/76 Hot: Trim:73 A/R:.63 65.50/55.90 Cost $170 Cast Taco maifold Cost $150 Chinese ebay DP Cost: $120 Chinese EWG Cost: $50 RX8 Yellows Cost: $100 Ebay WB02 Cost: $130 eBay intercooler and piping Cost:Had it already https://farm5.staticflickr.com/4189/...76f95e20_c.jpg 20161127_140326 by Tyler Swann, on Flickr Begin mock ups for diffuser. Couple I bolts and some flat bar and were good! Time: 8 Hours Cost $10 https://farm3.staticflickr.com/2857/...e78aa782_c.jpg 20161127_140458 by Tyler Swann, on Flickr https://farm3.staticflickr.com/2825/...fba4743e_c.jpg 20161210_160105 by Tyler Swann, on Flickr Cut bumper, big diffuser, so racecar. https://farm5.staticflickr.com/4168/...3d2c4047_c.jpg 20161215_181515 by Tyler Swann, on Flickr Let the turbo things begin! |
https://farm5.staticflickr.com/4159/...20f282e6_c.jpg
IMG_20161215_195456 by Tyler Swann, on Flickr Kept this build under wraps, firs ever social post about the project. https://farm5.staticflickr.com/4169/...4eab54b0_c.jpg 20161218_155432 by Tyler Swann, on Flickr Install day, had some friends over, did a little BBQ, overall a wonderful day. Ended up having to get the sawzall out to trim part of a shelf off for the DP to fit. No surprise with the given parts selection. Various extra parts were needed, but nothing major. Time:12 Hours Cost: $50 https://farm5.staticflickr.com/4160/...c94eccbe_c.jpg Snapchat-469463591 by Tyler Swann, on Flickr I guess I finally felt like showing off. https://farm5.staticflickr.com/4177/...67db5fef_c.jpg Message_1482264656012 by Tyler Swann, on Flickr Oil line adapter. Local mom and pop parts shop had it in stock. I was shocked. Cost $10 https://farm5.staticflickr.com/4167/...0a4509cb_c.jpg 20170102_142725 by Tyler Swann, on Flickr The “I want a big ducktail but cant afford one” phase. Time: 10 Hours Cost: $20 https://farm5.staticflickr.com/4189/...e582430c_c.jpg 20170102_162534 by Tyler Swann, on Flickr This pleases the crown. https://farm3.staticflickr.com/2814/...519d8838_c.jpg 20170102_191026 by Tyler Swann, on Flickr Sheet glass is a pain, ended up ditching this idea. Learned a lot about glassing, so not a total loss. https://farm3.staticflickr.com/2827/...a8988b83_c.jpg 20170108_142541 by Tyler Swann, on Flickr China “gasket”. No surprise here. Went with a double layer. Time:1 Hour Cost $10 https://farm3.staticflickr.com/2873/...2c6d1d9e_c.jpg 20170109_133147 by Tyler Swann, on Flickr Blown the F out! https://farm3.staticflickr.com/2858/...c7770aae_c.jpg 20170114_183844 by Tyler Swann, on Flickr Picked up an NRG bucket on a work trip. Whats the point in working if you dont spend the money while you earn it? (Ended up selling for what i paid for it, net zero) https://farm5.staticflickr.com/4187/...b384b023_c.jpg 20170117_175653 by Tyler Swann, on Flickr Few hours of driving. Really just wanted to see what it looked like .https://farm5.staticflickr.com/4179/...0dd3ac34_c.jpg 20170128_153357 by Tyler Swann, on Flickr Poof poof! Soot! https://farm5.staticflickr.com/4156/...ecafa2af_c.jpg 20170204_113811 by Tyler Swann, on Flickr Was expierencing what I thought was spark blowout around 5k, decided to go COP. Didnt think I needed it so soon at only 13 psi, but DIY all the things. Easy to wire with writeups. Went with the capacitor. Time:4 Hours Cost: $75 https://farm3.staticflickr.com/2806/...546e100e_c.jpg 20170204_123851 by Tyler Swann, on Flickr https://farm5.staticflickr.com/4179/...e04f2dff_c.jpg 20170204_123900_HDR by Tyler Swann, on Flickr Picked up the new fans apparently. China stuff again. Time:1 Hour Cost: $50 https://farm5.staticflickr.com/4178/...a6c4aa43_c.jpg 20170210_194246 by Tyler Swann, on Flickr Trying to figure out why the car wont start. Looking for burnt chips, and mis-wires ass I picked it up used. https://farm3.staticflickr.com/2850/...45d732bc_c.jpg 20170210_194304 by Tyler Swann, on Flickr All looks good. Wait, what spark mode was the board built, and what do I have it set to in TS? Of thats right, simple setting was off. First major expierence with a stupid mistake and a standaone. Not sure how I was running my spark mode opposite, but shoot, atleast I have COPs now! Time: 10 Hours Cost: self respect https://farm3.staticflickr.com/2871/...ce911425_c.jpg 20170218_114112 by Tyler Swann, on Flickr After being unable to dina a decent priced match to the NRG, I picked up a set of reps. Harnesses too! And purple, because why not? Time:6 Hours Cost: $550 https://farm5.staticflickr.com/4170/...3af977bf_c.jpg 20170219_125657 by Tyler Swann, on Flickr Suspected another blown gasket before boosting due to a water plug failure. https://farm3.staticflickr.com/2868/...24be6fa6_c.jpg 20170219_125709 by Tyler Swann, on Flickr Confirmed. https://farm5.staticflickr.com/4186/...41982d56_c.jpg 20170220_122735 by Tyler Swann, on Flickr Gasket kit came with valve seals. No time like the present! First time doing any head work. It was actually quite fun and relaxing. https://farm5.staticflickr.com/4166/...535163e0_c.jpg 20170220_122745 by Tyler Swann, on Flickr Made a valve spring compressor out of an 8” clamp and a 3/4” socket. Time:12 Hours Cost:$80 https://farm5.staticflickr.com/4188/...b80ea86a_c.jpg 20170222_200503 by Tyler Swann, on Flickr Pause for plastic F1 mirrors. Time: 1 Hour Cost: $35 https://farm3.staticflickr.com/2876/...42389669_c.jpg 20170303_183420 by Tyler Swann, on Flickr Its splitter time. Front end was pushing so I wanted all the downforce! 6” out from the base of the bumper. Core is corrugated plastic, like for science projects. Try number 2 with fiberglass, much more competent now. Decided to go with an undertray for all the aero. https://farm5.staticflickr.com/4160/...1caee01a_c.jpg 20170304_105048 by Tyler Swann, on Flickr Working out bluetooth bugs. Found out that when I resoldered the module to the board, I wired the Tx/Rx to eachother, when they were supposed to be opposite. Time: 4 Hours https://farm5.staticflickr.com/4165/...32b85692_c.jpg 20170304_120958 by Tyler Swann, on Flickr Had to toss on a lip because the bumper sits a little above the subframe. Time: 2 Hours Cost: $40 https://farm3.staticflickr.com/2865/...9b8f6e6d_c.jpg 20170304_121043 by Tyler Swann, on Flickr I get down with this. https://farm5.staticflickr.com/4158/...4b8eb4f1_c.jpg 20170304_140410_HDR by Tyler Swann, on Flickr More layers! https://farm3.staticflickr.com/2870/...2ba989b9_c.jpg 20170312_124440 by Tyler Swann, on Flickr Stock cluth was slipping bad. Ebay “stage 4”...whatever “stage 4” means...went with a lightened flywheel too. Time:6 Hours Cost:$250 https://farm5.staticflickr.com/4161/...53968d58_c.jpg 20170312_124502 by Tyler Swann, on Flickr TLDR:I dont like clutches. https://farm5.staticflickr.com/4182/...a919260c_c.jpg 20170315_105637 by Tyler Swann, on Flickr First clutch, internet taught. Not too bad. Still hated doing it though. https://farm5.staticflickr.com/4170/...e0b406c3_c.jpg 20170316_175838 by Tyler Swann, on Flickr Few really thick resin coats and I was happy. Time:20 Hours Cost:$100 https://farm5.staticflickr.com/4163/...7d42461a_c.jpg 20170318_084835_HDR by Tyler Swann, on Flickr And this is what a $400 hardtop looks like. Bad seals, bad paint, crack near front mounts. But it came with GS mounts, and I was going to change the lexan and paint it anyways. Bonus:I could afford it! Time:4 Hours Cost:$400 https://farm5.staticflickr.com/4166/...7fd477f4_c.jpg 20170318_114013 by Tyler Swann, on Flickr Ducktail. Jpfiberglass. Straight out the Dominican Republic. Shut up and take my money! Cost: $125 https://farm3.staticflickr.com/2815/...6f665281_c.jpg 20170326_145425_HDR by Tyler Swann, on Flickr Harness time! I picked up some SMR universal mounts off ebay, and slapped them to the factory rails. Aint nobody can afford $200 in seat mounts! Time: 6 Hours Cost: $30 https://farm3.staticflickr.com/2814/...b2138606_c.jpg 20170326_145435 by Tyler Swann, on Flickr Girlfriend liked the Bride. Subtle hints, subtle. https://farm3.staticflickr.com/2859/...304a3afe_c.jpg 20170326_152044_HDR by Tyler Swann, on Flickr Test fit and im lovin it! https://farm5.staticflickr.com/4191/...fb5edd24_c.jpg 20170326_162107_HDR by Tyler Swann, on Flickr Still all mojads over the cockpit. https://farm5.staticflickr.com/4161/...67d94e3d_c.jpg 20170329_183953 by Tyler Swann, on Flickr Appreciating my progress. At this point I feel like im in the final stretch. https://farm5.staticflickr.com/4170/...79832cf7_c.jpg 20170329_184333 by Tyler Swann, on Flickr Final mockups before body work and paint. https://farm5.staticflickr.com/4167/...1ac9dff8_c.jpg FB_IMG_1491240567789 by Tyler Swann, on Flickr One last trip out before its apart for weeks. Held its own against a buddys FRS with a Vortech. Surprised to say the least. |
https://farm5.staticflickr.com/4157/...c89f912b_c.jpg
20170404_180913 by Tyler Swann, on Flickr Drill, pop, and fill. When you want the savage rivet look, but also think that your fashion accesory will provide any downforce. Hit it with some bondo! https://farm5.staticflickr.com/4163/...0ab67f39_c.jpg 20170404_180918 by Tyler Swann, on Flickr https://farm5.staticflickr.com/4163/...0ab67f39_c.jpg 20170404_180918 by Tyler Swann, on Flickr https://farm3.staticflickr.com/2845/...2f465393_c.jpg 20170427_192353 by Tyler Swann, on Flickr Beginning of the backyard-under-an-ez-up paint job. The prep work was killer. Literally removed every piece I could. Bondo in the reflector holes. Sand every square inch. It took some serious time, like the most of any previous projects. But so, so, so worth it. https://farm5.staticflickr.com/4176/...7ba2fcff_c.jpg 20170427_192359 by Tyler Swann, on Flickr Flat Eastwood primer on splitter and hardtop. Going for a low-key two tone look. https://farm3.staticflickr.com/2841/...aaa31187_c.jpg 20170429_163648 by Tyler Swann, on Flickr Blanked the side lights for the license plate. Went with bolt/light combo. https://farm3.staticflickr.com/2851/...dff77f48_c.jpg 20170429_163655 by Tyler Swann, on Flickr Dove Grey all the things! https://farm3.staticflickr.com/2829/...3a4080cd_c.jpg 20170502_185652 by Tyler Swann, on Flickr Quick brake upgrade while watching paint dry. ZZZZZzzzzzzz Willwood 11”. https://farm3.staticflickr.com/2807/...62677cea_c.jpg 20170506_163237 by Tyler Swann, on Flickr Time:2 Hours Cost:$450 https://farm3.staticflickr.com/2891/...9e9b2b9d_c.jpg 20170503_192007 by Tyler Swann, on Flickr The main event! Finally! https://farm5.staticflickr.com/4174/...3472f62b_c.jpg 20170503_211716 by Tyler Swann, on Flickr Nothing beats those late nights where you make the final push to reach a major milestone. Paint is done! And never again! Time:40 Hours Cost: $250 https://farm5.staticflickr.com/4179/...b90bb476_c.jpg 20170504_192513 by Tyler Swann, on Flickr And re-assembley begins. Its all downhill from here. Time for a cold one with the boys. https://farm5.staticflickr.com/4155/...428167ec_c.jpg 20170504_192529 by Tyler Swann, on Flickr https://farm5.staticflickr.com/4164/...58e469da_c.jpg 20170505_180615 by Tyler Swann, on Flickr Used the old window as a template. Found some tinted lexan, figured all the gucciness of tinted glass at a fraction of the weight? Im so in! https://farm3.staticflickr.com/2818/...c2c2ff32_c.jpg 20170505_185148 by Tyler Swann, on Flickr 40 someodd hole in the top and lexan and I threw down a bead of silicone and tightened the bolts up! Time:4 Hours Cost:$100 (Lexan is stupid expensive for being a sheet of plastic.) https://farm3.staticflickr.com/2843/...aa3fc84e_c.jpg 20170505_195224 by Tyler Swann, on Flickr Yes. All the yes! https://farm5.staticflickr.com/4192/...14c45f87_c.jpg 20170505_195314 by Tyler Swann, on Flickr Pretty tinty if you ask me! https://farm5.staticflickr.com/4182/...5e5317be_c.jpg 20170506_121408 by Tyler Swann, on Flickr Front end coming together. https://farm5.staticflickr.com/4178/...7c4c1b3e_c.jpg 20170506_163246 by Tyler Swann, on Flickr Its looking like a car again! Struts added to splitter. Cost: $15 https://farm5.staticflickr.com/4171/...3aabe342_c.jpg 20170506_171747 by Tyler Swann, on Flickr Overfenders! The stoke is real at this point! https://farm3.staticflickr.com/2941/...44461e28_c.jpg 20170506_174742 by Tyler Swann, on FlickrFirst time not being a spaceship in weeks! Overall a lengthy process, but I am so happy with the final result. Time: 6 Hours https://farm5.staticflickr.com/4168/...2f69660c_c.jpg 20170506_175853 by Tyler Swann, on Flickr The obligatory new phone, who dis post on the gram. https://farm5.staticflickr.com/4156/...a6efab0c_c.jpg 20170506_175943_HD by Tyler Swann, on Flickr Everybody says that I put it on the wrong side. Silly kids. Pointless wings are for ricers. Pointless diffusers are for racecars! https://farm5.staticflickr.com/4174/...5c6cf57a_c.jpg 20170509_183443 by Tyler Swann, on Flickr This is what I call the air conditioning to whover ventures near enough for a ride. Copycat of the project-g, but from my research, vents in the bottom actually defeat the ducktail. Something about high pressure being vented into the cabin. Makes sense to me, and ill explain if necessary. https://farm5.staticflickr.com/4191/...e55cc13c_c.jpg 20170509_185843 by Tyler Swann, on Flickr 4” boat deck plates. Time:1 Hour Cost: $45 (Holesaw was 30 of that) https://farm5.staticflickr.com/4164/...d9988ea1_c.jpg 20170510_183244 by Tyler Swann, on Flickr At this point, I have a TT coming up in about 2 weeks. Cutting it close, I know, but thats how projects are meant to be. Scramble until the night before! Anyways, I catch wind that they allow open axhaust. Music to my ears! DIY mount to strap the floppy DP to the tranny. Sounds kinky, I know. Just roll with it. Cost:Free, bonus of fabbing as many thing as you can yourself! https://farm5.staticflickr.com/4184/...bbb6bafa_c.jpg 20170510_183707 by Tyler Swann, on Flickr Little less kinky now, innit?! https://farm5.staticflickr.com/4161/...886674f9_c.jpg 20170510_193144 by Tyler Swann, on Flickr Apparently the lights work. https://farm5.staticflickr.com/4426/...08583b56_c.jpg 20170512_133639 by Tyler Swann, on Flickr Extend the nose 6” and all of a sudden, a uhaul trailer becomes the stuff of nightmares. Ended up making wooden step ramps to get it on. https://farm5.staticflickr.com/4411/...3c62971f_c.jpg 20170512_184035 by Tyler Swann, on Flickr https://farm5.staticflickr.com/4349/...ba44f0dd_c.jpg 20170512_184101 by Tyler Swann, on Flickr Clearance...if you can call it that. https://farm5.staticflickr.com/4408/...b634dee6_c.jpg 20170512_190838 by Tyler Swann, on Flickr Quick test https://farm5.staticflickr.com/4430/...993eb35e_c.jpg 20170513_123646 by Tyler Swann, on Flickr TT spares, and...CAMO! Its like the water will magically flow through an invisible medium to and from the radiator. https://farm5.staticflickr.com/4378/...61476ee1_c.jpg 20170517_182618 by Tyler Swann, on Flickr Last minute threaded rod mod to keep the diffuser from being a big floppy sheet metal sail. https://farm5.staticflickr.com/4406/...0d4b505f_c.jpg 20170518_152130_HDR by Tyler Swann, on Flickr My life for the last year and a half with this car. If I wasnt at work, I was working on the car. Most nights and almost every weekend. https://farm5.staticflickr.com/4442/...6e5ce02a_c.jpg IMG_20170519_151259 by Tyler Swann, on Flickr One of the most satisfying pictures of the whole expierence. My dream, in reality, loaded on a trailer to go race.Below are pictures from the event. I did horribly, but for a first time pushing this car against cars with easily twice the power, I scored all the fun points! |
Is that a graphite head gasket?
|
Welcome to The Forum. It looks like you've been quite busy.
|
Originally Posted by psyber_0ptix
(Post 1437003)
Is that a graphite head gasket?
|
By then hopefully use an MLS gasket like oem intended.
|
All times are GMT -4. The time now is 03:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands