Dear Miata, Stop being so damn F&*%ing slow (Turbo Build)
#1
Stop being so damn F&*%ing slow (Turbo Build)
95 Miata, 120k Original engine
Exhintake cam swap
Racing Beat intake (knock off)
Koni Yellow/GC 440/300
FCM 36mm bumpstops
NB Mounts
Kosei K1 Racing 15x7 +38
Dunlop Direzza Star Specs 205/50/15
Carbotech xp10 front pads
949 SS brake lines
Exhintake cam swap
Racing Beat intake (knock off)
Koni Yellow/GC 440/300
FCM 36mm bumpstops
NB Mounts
Kosei K1 Racing 15x7 +38
Dunlop Direzza Star Specs 205/50/15
Carbotech xp10 front pads
949 SS brake lines
Last edited by Gt2560rMiata; 11-25-2012 at 02:35 PM.
#15
Crappy picture but this is the Detcan I made. The copper tubing, Fittings and clear hose all came from Home Depot. I bought a cheap mechanics stethoscope from Harbor Freight. This thing should work well when it comes to listening for detonation. I had my girlfriend hold the copper piping and scrap her fingernail on it and I could hear it easily. I have yet to drill a hole in it yet for mounting, unsure of exactly where I'm going to bolt it to at the moment
#18
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,597
Total Cats: 559
Aren't bkr7e's 2 steps colder than stock 1.8 plugs? I remember reading somewhere that stock 1.6 plugs (bkr6e) are 1 step colder for a 1.8.
I doubt it matters at all though, that said - I'm running the same plugs in my 1.6.
I doubt it matters at all though, that said - I'm running the same plugs in my 1.6.
#20
Ordered a blow off valve tonight. Went with a plastic Bosch unit that Audi uses. Bought it new from a European car parts sight (Volvo Parts, BMW Parts, European Car Parts | FCPGroton.com) brand new for $38 shipped. It will be setup for venting to atmosphere. Ill be running Megasquirt so no need to run it recirculated