1991 2JZ MIATAAAAAA
5 Attachment(s)
After a mishap with the rear end while driving it home from the tire store I am far to scared and just over trying to build this car.
Details 1991 miata Body is in very rough shape but generally no rust Many things have been cut and hacked apart on the shell to make the new stuff fit/work. Car has brand new tires on the front and rear ...rear radials are a little scared from the first time we tried driving without cutting part of the fender out of the way. Just was aligned and on the slow drive home is where it broke. Car needs a tune and has never seen WOT since it was put together. I will not guarantee anything reguarding that because i have not tested that far yet. I will point out every single little issue with the car that i do not like and i have not gotten around to redo or fix. (there are lots) It does run still and but needs new rear subframe bushings and axles (really just one axle i believe) and it can drive. The bushings somehow exploded at nearly zero speed or load while slowly letting out the clutch to pull into a parking lot. This is a pure project car with 50000 things to fix and improve. This will absolutely not be a DD or anything close to it. Here are some random pictures and a video. Attachment 183505 Attachment 183506 Attachment 183507 Attachment 183508 Attachment 183509 Proefi 128 Custom engine harness with "motorsports" firewall connector Monster miata ford 7.5 Rear end (needs new axles and mounts $510 total to fix) JDM 2jz GTE VVTI AEM smart coils with custom bracket Bullseye 68mm turbo with .91 AR hotside Ebay cast manifold with ported wastegate Tial 38mm wastegate GM 3 port v8 roadsters 7/8th clutch master Z speed internal slave cyl spec twin disk rated to $900 ft lbs 2008 350z transmission Custome TRD cluster (not fully setup yet) Pro efi can gauge Custom Intercooler using bell ic core and custom end tanks vibrant vanjen clamps (2) 1 coupler in whole system and 1 vband aeromotive fpr wally460 in tank fuel pump bosch 1000cc injectors ebay fuel rail m&h 235 drag radials custom driveshaft |
What is your asking price? It looks like the stock hood should fit no problem?
|
Price?
|
Stock hood will not fit without cutting some holes in it (i didnt cut it yet never got that far).
Asking 11k as is....needs around $550 worth of parts to fix it and a couple hours of labor. Car drove decent for the couple miles i drove it :/. Very capable car once bugs are fixed. |
Originally Posted by thumpetto007
(Post 1354027)
What is your asking price? It looks like the stock hood should fit no problem?
|
Originally Posted by thumpetto007
What is your asking price? It looks like the stock hood should fit no problem?
|
looks like a well put together sleeper/daily.
|
Decided I am going to go to school full time so toys have to go.
$9000 as is .. |
Jesus that thing is nuts!
|
All times are GMT -4. The time now is 05:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands