1993 Mazda Miata - $10,000
 

Category: Import
Status: Clean Title

I have a 1993 Mazda Miata for sale, in USA - California.

Mileage: 140,000 miles
Engine Size: 1.6


Asking price is $10,000



I am posting this for a customer of mine. Serious inquiries only. No part-out requests. Car is located in the San Francisco Bay Area.

This car started as a street car in 2010 and was slowly turned into a very clean track car. Most of the parts were installed at Trackspeed between 2010 and 2013. The spec sheet speaks for itself. This car is professionally built and tuned, very well maintained and very well cared for, and needs nothing. It has a current SCCA logbook (ITE) and is legal for NASA Super Touring as well.

Clean CA title. Buyer is responsible for smog. Car is intended for off-road use only.

e: MT insists on re-uploading my pictures to their server, where the links promptly break. An album of pictures has been uploaded here: http://imgur.com/a/Izvuz#0

ENGINE

• 1.6L with 140,000 miles
• 10psi, approx. 200-210whp
• Bell Engineering S1 Turbo Kit with Garrett GT2560 Turbo
  • Ceramic Coated Turbine Housing
  • Ported Turbine Housing
  • Cast Ductile Iron Exhaust Manifold, with Directed Pulses Feature
  • Ceramic Coated Exhaust Manifold
  • Mild Steel Separated Gases Downpipe
  • Stainless Steel Braided Oil Supply Line
  • Stainless Steel Coolant Lines
  • Stainless Steel Oil Drain Line
  • Upgraded Intercooler
  • Black Powdercoated Tubes
  • K & N Air Filter
  • T-Bolt Hose Clamps for Intercooler Tubes
• Trackspeed Engineering Inconel Manifold Stud Kit
• Trackspeed Engineering Coil-On-Plug Kit
• RX7 460CC Red Top Injectors
• Walbro 190lph Fuel Pump
• MegaSquirtPNP Gen1 ECU, tuned by Andrew Kidd @ Trackspeed
  
  DRIVETRAIN
• 6 speed NB Transmission
• 3.9 Torsen Differential
• ACT HD Street Clutch Kit
• Trackspeed Engineering Stainless Steel Clutch Line
  
  BRAKES
• Trackspeed Engineering Willwood 4 pot 11.75” Front Big Brake Kit
• M-Tuned Rear Big Rotor Kit with Sport Rears
• Hawk DTC-60 pads front/rear
• Trackspeed Engineering Proportioning Valve Kit
• NB Sport master cylinder/booster
• Trackspeed Engineering Brake Ducts & Hoses
• Goodridge G-Stop Stainless Steel Brake Lines
  
  COOLING
• Trackspeed Engineering Dual Row Race Radiator
• M-Tuned Coolant Reroute
  
  EXHAUST
• Enthuza M1 3” Turbo Racer Exhaust
• 3” Test Pipe
  
  SUSPENSION
• XIDA Club Sport Dual Spring Coilovers 700/400 with OEM Mazda NB Mounts
• 949Racing Endlinks Front and Rear
• Racing Beat Tubular Front Sway Bar with blocks
• MSM Rear Sway Bar
• Professionally aligned/cornerweighted
• Energy Suspension Bushings with Zerk Fittings
• ART Blueprinted Front Hubs w ARP Extended Studs
• New Mazda Rear Hubs w ARP Extended Studs
  
  AERODYNAMICS
• APR GTC-200 Wing
• Trackspeed Engineering Custom Front Splitter
  
  WHEELS & TIRES
• 949Racing 15x9 6ULs
• Toyo RR 205/50/15
  
  INTERIOR
• TCDesign Spec Miata Cage with NASCAR door bars on driver and passenger side
• Sparco Steering Wheel Hub
• Sparco383 Steering Wheel
• NRG 2.0 Quick Release
• Longacre Rear View Mirror w/ JOES Racing Extended 9” Rear View Mirror Brackets
• SCCA/NASA-legal Kill Switch
• Push Button Start
• Innovate LC1 Wideband w Blue Gauge Display
• Autometer Boost Gauge
• Turn Signal Delete
• Gutted Doors
• Wire Tuck
  
  SAFETY
• Corbeau FX1 Pro Fiberglass Seat
• TCDesign Seat Mount
• Autopower Seat Back Brace
• SchrothProfii II-6 Harnesses
• Simpson C5R Driver Net
• G-Force Window Net
• Handheld Fire Bottle
  
  EXTERIOR
• OEM Hardtop
• Aerocatch Hood Latches
• Headlight Delete
• Windshield Wiper Delete
  
  MISCELLANEOUS
• Rennenmetal Tow Hooks Front and Rear
• Fuel Pump Kill Switch

Picture links appear to be b0rken.

--Ian

Software glitch. When vendors post pics using the toolbar, it does that. We have to manually [img]cool pics of car parts.jpg[/img]

Been that way for about two years.

Yep. If the cut-rate IB servers decide to eat my [img]'d pictures, just use this imgur link, which is free and infinitely more reliable: Thumper - Imgur

I think I fixed it. Had no idea this was an issue.

Clean ass car. GLWS

Looks like a total blast. Great deal for a nice track car it seems.

Andrew was listing this car for me and I've decided to part it out.

Rolling shell with stock brakes, stock suspension, roller wheels/tires. Includes cage, hardtop, and safety gear (seat, harness, side net, cutoff switch). $4000

-add 3.9 Torsen, axles, driveshaft $1000
-add XIDA-CS coilovers, 700/400 w/ helpers and NB tophats $2000
-add 15x9 6ULs with used 205/50 Toyo RRs $800
-add 11.75 front brakes, Sport rear rotor adapters, prop valve, brake ducts, NB 15/16" master/booster, stainless lines $1000
-add 1.6 motor (no header or intake) $400
-add BEGI S3 turbo system with Trackspeed M10 inconel studs $1600
-add 6-speed transmission $700
-add ACT HD Street clutch $150
-add Trackspeed Radiator $450
-add COPs $200
-add MSPNP $500

If there are other parts of the build that you'd like just send me a note and I'll price it out for you.

Note: Individual part out requests will be considered and queued after the roller sells. The person buying the roller has first choice of the items they'd like included. After that all parts are fair game.

Please reach out to me and NOT Andrew for part out requests. Systems are being sold as complete sets (in other words, I will not part out individual components of the turbo system, brake setup, etc.)

Thanks,
Jason

Jason,

Can you queue me up for the Xidas, and possibly the 6ULs too?

Thanks,
Joe

Jason,

Can you PM me a price for the MSPNP and RX7 injectors if available?

I don't have the post count to send PMs so I'll respond to general pricing questions here.

The MSPNP is $500 and the injectors are $75.

I'm interested in the injectors, can you email me at arm972@gmail.com?

Pm'd you. 1.6 RB front tubular sway bar?

I'm in San Fran until Monday.

Parting out the wing?

Email is best -- my name at diyautotune.com

Please send me pics of the wheels. How are the tires? I'm interested in those, the clutch and the injectors. I can have the shipping billed via my FedEx account as well, thank you.

Also for a faster response: italiano1390@gmail.com

Is this car still available complete? I am very interested, although cannot PM yet. Thank you.