1999 Mazda Miata - $$11,000 obo
09-07-2011, 08:41 AM
#1
Senior Member
Thread Starter
iTrader: (19)
Join Date: Oct 2007
Location: MoCo, MD
Posts: 703
Total Cats: 0
1999 Mazda Miata - $$11,000 obo
Category: Import
Status: Clean Title
I have a 1999 Mazda Miata for sale, in USA - Maryland.
Mileage: 110,000 miles
Asking price is $11,000 obo
1999 Mazda Miata
Popular Equipment Package
Silver, Tan Interior, tan top
110,000 miles
AC removed, Power Steering intact
Turbo:
BEGI S6 with GT3071R (under 500 miles)
Ceramic coated manifold
Tial MVS watercooled wastegate
BEGI #3 intercooler
Drive train:
6 Speed Mazda Speed transmission
3.63 Cryo treated R&P with new bearings and crush sleeve
Delrin differential mounts
ACT pressure plate
ACT disc
Lightened flywheel
Suspension:
Tein Flex 9/6kg
Tein EDFC
Flyin’ Miata Sway bars
949 Racing chassis braces
Flyin’ Miata butterfly brace
Stein’s framerails
Brakes:
Goodwin Racing Big brake kit, version 4
http://www.good-win-racing.com/Mazda.../60-10915.html
Race and street pads included. Rotor rings have plenty of life
Wilwood proportioning valve
SS lines, front to back
Engine #1:
Forged Rods
Flyin’ Miata 8.6:1 Wiseco pistons
ARP everywhere
Supertech valve springs
Supertech +1mm SS valves
Ported polished, head.
Coil on plug conversion
Deatschwerks 800cc injectors
Koyo 52mm Radiator
Coolant re-route (not homemade, drawing a blank on the name)
3in V-banded downpipe
3in SS dual exhaust
Engine #2 (shortblock):
Forged Rods
Flyin’ Miata 8.6:1 Wiseco pistons
ARP everywhere
Crank scraper
Electronics:
Braineack built MS-2
Apexi AVC-R
Upgraded stereo (drawing a blank at the moment)
Viper Alarm with remote start
Interior:
Sparco seats
Momo wheel with NRG #4 removable hub
Hard dog Dual diagonal roll bar with harness bar
I picked this car up 4 years ago as a replacement for a motorcycle after an accident. Over the years I’ve upgraded practically everything possible. I weep at how much money I have in this thing.
The car is in reasonably good shape for a 1999. A few dings here and there, and a few paint blemishes, but nothing too horrid.
The issue with the car is engine noise. I installed a fully built block last spring, and have been chasing a temperature and rpm dependant noise since. The noise only occurs above 3,000rpm, and only when the motor is warm. I was at my wits end trying to identify the noise, so I purchased another fully built short block, which can be included with the sale. Who knows, maybe the noise is something easy to fix. Worst case you’re looking at a weekend of work to correct by swapping blocks.
I am forgetting a ton of stuff that’s done to the car or included with it. As I remember, I will update this thread.
The stock suspension, seats, radiator, and sway bars, are all included. A Silver hard top with headliner and defrost, cart, cover, and hoist can be included for an additional $1k.
Take a look at the specs and pics. Unfortunately, all the underhood pics are with the BEGI S4 kit. I will snap some of the S6 kit soon.
If you have any questions, please email me at: ptschmidt@gmail.com
Status: Clean Title
I have a 1999 Mazda Miata for sale, in USA - Maryland.
Mileage: 110,000 miles
Asking price is $11,000 obo
1999 Mazda Miata
Popular Equipment Package
Silver, Tan Interior, tan top
110,000 miles
AC removed, Power Steering intact
Turbo:
BEGI S6 with GT3071R (under 500 miles)
Ceramic coated manifold
Tial MVS watercooled wastegate
BEGI #3 intercooler
Drive train:
6 Speed Mazda Speed transmission
3.63 Cryo treated R&P with new bearings and crush sleeve
Delrin differential mounts
ACT pressure plate
ACT disc
Lightened flywheel
Suspension:
Tein Flex 9/6kg
Tein EDFC
Flyin’ Miata Sway bars
949 Racing chassis braces
Flyin’ Miata butterfly brace
Stein’s framerails
Brakes:
Goodwin Racing Big brake kit, version 4
http://www.good-win-racing.com/Mazda.../60-10915.html
Race and street pads included. Rotor rings have plenty of life
Wilwood proportioning valve
SS lines, front to back
Engine #1:
Forged Rods
Flyin’ Miata 8.6:1 Wiseco pistons
ARP everywhere
Supertech valve springs
Supertech +1mm SS valves
Ported polished, head.
Coil on plug conversion
Deatschwerks 800cc injectors
Koyo 52mm Radiator
Coolant re-route (not homemade, drawing a blank on the name)
3in V-banded downpipe
3in SS dual exhaust
Engine #2 (shortblock):
Forged Rods
Flyin’ Miata 8.6:1 Wiseco pistons
ARP everywhere
Crank scraper
Electronics:
Braineack built MS-2
Apexi AVC-R
Upgraded stereo (drawing a blank at the moment)
Viper Alarm with remote start
Interior:
Sparco seats
Momo wheel with NRG #4 removable hub
Hard dog Dual diagonal roll bar with harness bar
I picked this car up 4 years ago as a replacement for a motorcycle after an accident. Over the years I’ve upgraded practically everything possible. I weep at how much money I have in this thing.
The car is in reasonably good shape for a 1999. A few dings here and there, and a few paint blemishes, but nothing too horrid.
The issue with the car is engine noise. I installed a fully built block last spring, and have been chasing a temperature and rpm dependant noise since. The noise only occurs above 3,000rpm, and only when the motor is warm. I was at my wits end trying to identify the noise, so I purchased another fully built short block, which can be included with the sale. Who knows, maybe the noise is something easy to fix. Worst case you’re looking at a weekend of work to correct by swapping blocks.
I am forgetting a ton of stuff that’s done to the car or included with it. As I remember, I will update this thread.
The stock suspension, seats, radiator, and sway bars, are all included. A Silver hard top with headliner and defrost, cart, cover, and hoist can be included for an additional $1k.
Take a look at the specs and pics. Unfortunately, all the underhood pics are with the BEGI S4 kit. I will snap some of the S6 kit soon.
If you have any questions, please email me at: ptschmidt@gmail.com
Reply
0
0
09-07-2011, 01:46 PM
#3
Senior Member
Thread Starter
iTrader: (19)
Join Date: Oct 2007
Location: MoCo, MD
Posts: 703
Total Cats: 0
The coolant reroute is by K-Tuned. The indash DVD/NAV is Eclipse.
The car also has:
LC-1 wideband with analog gauge
Defi EGT
VDO Oil and Water temp
HIDs
15 X 9 Bronze 6ULs with 225/45 Hankook RS2s
I'm still forgetting a ton of stuff, will update later.
The car also has:
LC-1 wideband with analog gauge
Defi EGT
VDO Oil and Water temp
HIDs
15 X 9 Bronze 6ULs with 225/45 Hankook RS2s
I'm still forgetting a ton of stuff, will update later.
Reply
0
0
10-26-2011, 10:16 AM
#7
Senior Member
Thread Starter
iTrader: (19)
Join Date: Oct 2007
Location: MoCo, MD
Posts: 703
Total Cats: 0
If anybody is interested in the car, drop me a line. I flaked on responding before since my wife walked out on me the week I posted this for sale.
Reply
0
0
02-29-2012, 08:47 AM
#10
Junior Member
Join Date: Nov 2010
Location: Albuquerque, NM
Posts: 119
Total Cats: -3
Well i have a paid off property that i am currently in the process with the bank for an equity loan to purchase a toy which at first was a gtx35r 400whp rx7 but now i'm thinking by downgrading i can have two cars instead (a fun one and a matrix for mpg). It's a nice freaking FD but I still prefer to be on the cheap side but IDK, i'm still on the fence about this.
Anyways few questions,
First is what will you accept because I plan to drive it away so all the extra stuff I cannot take/dont want.
I would like a walk through video or maybe a trusted member to take a look.
Compression test..
More info on the 20psi tune like tuner, whp, air intake temps, hows the idle etc.
In your pictures you ran with drag slips so what was your time?
Will this make it on a long drive back to the Southwest (2,000 miles)?
Is the hard top ready to go?
BTW it is a very nice car and sucks about the wife thing man.
Anyways few questions,
First is what will you accept because I plan to drive it away so all the extra stuff I cannot take/dont want.
I would like a walk through video or maybe a trusted member to take a look.
Compression test..
More info on the 20psi tune like tuner, whp, air intake temps, hows the idle etc.
In your pictures you ran with drag slips so what was your time?
Will this make it on a long drive back to the Southwest (2,000 miles)?
Is the hard top ready to go?
BTW it is a very nice car and sucks about the wife thing man.
Reply
0
0
08-31-2012, 08:14 AM
#11
Senior Member
Thread Starter
iTrader: (19)
Join Date: Oct 2007
Location: MoCo, MD
Posts: 703
Total Cats: 0
This car is back up for sale. I ended up swapping motors out of an abundance of caution and cannot get the rear main seal to stop leaking. If you have the time to put into it, come steal this from me.
Reply
0
0
09-04-2012, 02:25 PM
#17
I dug through your album but it's tough to tell what's current and what's been changed. Do you post up a couple current engine bay pics? Is the head on the car now a stock 99/00? Would you forsee the car having any problems if someone was to drive the car to Florida after purchasing it?
*edit - just read the rear main is leaking, probably not recommended for a +1000mi drive*
*edit - just read the rear main is leaking, probably not recommended for a +1000mi drive*
Reply
0
0
09-04-2012, 03:57 PM
#18
Elite Member
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
I dug through your album but it's tough to tell what's current and what's been changed. Do you post up a couple current engine bay pics? Is the head on the car now a stock 99/00? Would you forsee the car having any problems if someone was to drive the car to Florida after purchasing it?
*edit - just read the rear main is leaking, probably not recommended for a +1000mi drive*
*edit - just read the rear main is leaking, probably not recommended for a +1000mi drive*
Reply
0
0
