2000 NB SE Turbo
 

TURBO 2000 Mazda Miata/MX-5 SE
1.8l
6 Speed Manual Transmission
Torsen Differential
Bose Speaker System

71,664 Miles

CLEAN TITLE

Car is turbo'd and pretty quick. Never Dyno'd but I would say around 235hp. Boost limit is set at 13psi.

The paint under the wrap is the original Mahogany Mica. The car has been vinyl wrapped in Nardo Grey. Hardtop wrapped in Black.

Original owner was a little old lady who sold the car to me at ~40,000 miles. Car has never seen a day on the track and less than 8,000 miles with the turbo.

No A/C, No Powersteering

Parts/Modifications:

Engine/Performance:
-Garret GT2560r Turbo w/ K&N Air Filter
-FlowForce 640cc Injectors
-MegaSquirt MSPNP2
-Megan Racing Aluminum Radiator
-Flyin' Miata Turbo Elbow
-Flyin' Miata Turbo Exhuast Manifold (w/ Inconel Studs)
-Flyin' Miata Full Exhaust
-Flyin' Miata Turbo Downpipe
-Flyin' Miata Turbo HeatShield
-SuperMiata 6 Puck Race Clutch
-Intercooler and Piping
-TurboXS BOV
-Flyin' Miata Coilovers - VMAXX Extreme Sport
-Rota Grid Wheels
-Dunlop Direzza Z3 Tires (Not much use)
-Dual Guage Cluster for Boost and AFR
-A/C and Powersteering Removed/Deleted

Cosmetic/The Rest:
-OEM Miata Hardtop (Paint has been sanded in areas before wrap)(Ceiling vinyl wrapped)
-Softtop deleted
-"Boosted" Banner
-Roof Spooiler for Hardtop
-Original Bumper Lip replaced with GV Style Lip
-Retrofitted HID Headlights w/ RGB Halos (Interior Painted Black)(Halos have Bluetooth Control)
-Sony XAV-AX1000 Head Unit (w/ AndroidAuto)
-Original Bumper
-NRG Prisma Sakura Seats
-NRG Steering Wheel, Hub and Quick Release
-RaceQuip 6-Point Race Harnesses
-HardDog Hardcore 4-point Rollbar (Painted white)
-HardDog Harness Bar
-LRBSpeed Door Cards
-White Shift Knob
-NRG E-brake handle
-Original tan carpet was swapped with black
-Original tan interior trim was either replaced with black or painted black
-Interior RGB Led Footwell Lights
-RGB Underglow (Bluetooth Control)
-LED License Plate Lights

Things I will be including if wanted:
-Current TunerStudio Tune for MegaSquirt
-OEM Spoiler
-OEM Nardi Wood Steering Wheel
-OEM Nardi Wood E-brake Handle
-OEM Power Antenna

Issues:
-Transmission has a slow leak at one of the seams. This can be re-sealed.
-Hood, Front Bumper and Rear Bumper may need re-wrapped. Vinyl on Bumper is starting to lift.
-Small Dent on Hood and Driver Door
-Original paint on front bumper was sanded near badge prior to wrapping
-Trunk has 3 small holes from where the OEM Spoiler was mounted. These can be sanded and filled.

Asking $9,000 - Wilmington, NC area

https://cimg7.ibsrv.net/gimg/www.mia...d8761abdf3.jpg
https://cimg8.ibsrv.net/gimg/www.mia...2834a69f29.jpg
https://cimg0.ibsrv.net/gimg/www.mia...aab85c62dc.jpg
https://cimg2.ibsrv.net/gimg/www.mia...83544c9bef.jpg
https://cimg3.ibsrv.net/gimg/www.mia...caf088045a.jpg
https://cimg6.ibsrv.net/gimg/www.mia...41350bf48e.jpg
https://cimg7.ibsrv.net/gimg/www.mia...2b1cfceaf6.jpg
https://cimg8.ibsrv.net/gimg/www.mia...a0d820c6af.jpg
https://cimg0.ibsrv.net/gimg/www.mia...5e647af32d.jpg
https://cimg2.ibsrv.net/gimg/www.mia...90e04a93ab.jpg
https://cimg5.ibsrv.net/gimg/www.mia...850eaca8dd.jpg
https://cimg7.ibsrv.net/gimg/www.mia...6ab51c7710.jpg
https://cimg8.ibsrv.net/gimg/www.mia...72baa01e58.jpg
https://cimg1.ibsrv.net/gimg/www.mia...a1a75a0c1d.jpg
https://cimg3.ibsrv.net/gimg/www.mia...806fea4b20.jpg
https://cimg6.ibsrv.net/gimg/www.mia...79d3a97fa8.jpg
https://cimg7.ibsrv.net/gimg/www.mia...dbe91020c2.jpg
https://cimg9.ibsrv.net/gimg/www.mia...08d13c6f90.jpg
https://cimg0.ibsrv.net/gimg/www.mia...759762f1b4.jpg
https://cimg1.ibsrv.net/gimg/www.mia...9dcc6a4069.jpg

I helped Andy with this build and can vouch for the car. It was the definition of a "grandma car" when he bought it and is just as clean post-build. Most of the parts in the list above were brand new when installed too!

This is a great deal for sure. GLWS

SOLD