91 Non-Moving T3 Turbo Miata With 93 Parts Car
The Bad:
First off, I will not part. I won’t even wipe off some dirt and give it to you for $100. I won’t let you come over and take what you need. Be warned: If you PM me or post for parts I will ban you instantly. No ifs, ands, or buts. The engine runs, and runs well. The pressure plate needs to be replaced in order to drive (Clutchnet 2X Pressure Plate on order). I will not let you install in my garage, car will need to be towed out. If no sale within a few weeks I’ll do it myself and then you can drive the car out. The exhaust is still damaged from my previous accident. I have a replacement muffler and bends to correct it. Just needs to be dropped off at muffler shop. The Jazz: 120k on the body, 83k on suspension, unknown on motor makes great compression and vacuum. It made 230hp at 6K at 13psi last time I dynoed. Parts car has little remaining parts, 120k on motor (long nose), full rear suspension, full front suspension. Suspension not installed, so take what you want what’s left. The car has been repainted, previous owner thought it was a good idea to repaint over door dings. I’m the third owner, it’s a FL car and it’s in great shape, owned by the same old woman since 1996. I will sell with any parts from the parts car for $6,500. Take in mind the ’91 cost me $3,800 two months ago, completely stock. There is more than $1,700 in the rest of the setup. Plus $1000 for the Hardtop. I am simply tired of wrenching on it. I just purchased and drove home a 2005 Subaru Legacy GT to replace this and my Altima. I don’t have the time, money, space to invest into cars at the moment and it’s easier for me to be done with it. Expect a for sale post for my Altima shortly, I decided not to trade it in right away, as this was a spur of the moment buy for me and my wife. Vehicle: 227hp/204tq @ 13psi 1991 Mazda Miata Base Model No Power anything, has A/C Engine: DiY Headwork (unshrouded valves, port matching, blending, etc.) Garrett T3 (Super 60) .42/.48 A/R BEGi Manifold 2.5"-2.75" BEGi Downpipe 24"x12"x3" Bar and Plate Front Mount Intercooler 2.75" - 3" Test Pipe 3" Enthuza Budget Racer with Magnaflow Muffler (I have a new muffler and bend to fix this from previous damage.) GReddy Type-S Blow Off Valve460cc RX7 Injectors 1" All Aluminum Radiator Dual Feed Fuel Rail Toyota Coil on Plugs Drivetrain: Clutchnet 2X Red PP and 6-puck disc (PP on order, will not be installed, car will not drive.) 84-85 7" RX7 Clutch-type LSD (4.10 final)94-97 1.8L Driveshaft and Rear Axles 85-85 Aluminum Carrier with Solid Mounts Mazdacompetion Engine Mounts Suspension: Koni Adjustable Shocks Front Jackson Racing 7/8" Sway Bar OEM Rear Sway Bar w/Poly Bushings Flyin' Miata Springs (318/233 lbs.) FCM Bumpstops Racing Beat Adjustable End-links (Front Only) Russell Stainless Steel Brake Lines Hawk Hp+ Pads 1.8L 10" rotors '93 14" Dasies '94 14" 7-spoked wheels w/ Falken Azenis RT-615s Kosei K1s 16x7.5 +38 205/45/16s Alignment: Front: Exterior:-1.7 Camber Maxed caster (4° IIRC) 1/16" toe out Rear: -2.3 Camber 1/16" toe out Factory Hardtop Hard Dog Hardcore Hard Top Roll Bar R-Package front spolier NACA Duct Intake Headlight Lid Sylvania Silverstar Headlights Side Mounted Front License Plate Euro-Clear Parking Lens Smoked Turn Signal Lens Interior: Autometer Phantom Boost Gauge Autometer Phantom AFR Gauge Autometer Phantom Oil Temp Gauge Autometer Phantom EGT Gauge 5-Point Racing Harness Boss Frog Seat Belt Guides (uninstalled) Voodoo Shift Knob Other: DiY MSnSe Piggyback ECU (controls everything but idle and a/c) Radiator Cooling Plate ATE Super Blue Brake Fluid LC-1 Lamda Cable Parallel Fan Mod https://www.miataturbo.net/forum/att...4&d=1206819984 https://www.miataturbo.net/forum/att...9&d=1206128598 http://www.boostedmiata.com/new_miat...p/IMG_5064.jpg http://www.boostedmiata.com/new_miat...p/IMG_5061.jpg |
oh, my, god.........
|
I feel the pain....... GL with the sale Scott!
|
say it ain't so!!!!!!!
good luck with the sale, and congrats on the Legacy, they're sweet cars! |
scott hit his breaking point and his wife / parents probably encouraged it.
i feel so... dumped! |
Go have a beer and rethink this in the morning. I've been there you will regret it.
|
Good luck with the sale sir! Your car, input, and efforts will be sorely missed.
|
Originally Posted by y8s
(Post 236299)
scott hit his breaking point and his wife / parents probably encouraged it.
i feel so... dumped!
Originally Posted by IcantDo55
(Post 236303)
Go have a beer and rethink this in the morning. I've been there you will regret it.
|
This seems.......sudden.
From someone that has been there, you will miss it. Sell your altima to help fund the suby, but don't get rid of the play car. You seem to have a personality type that always wants to fiddle with things. I don't think your wife will appreciate you playing on the new suby as much as on the old miata. your cost of ownership on the miata can't be that much, and you will lose your ass if you sell it as is. Sleep on it. :hs: |
1 Attachment(s)
|
we should start a poll,
all those who vote scott keep his miata SAY I!!!!!!! I !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
damn it...
|
Originally Posted by urgaynknowit
(Post 236331)
all those who vote scott keep his miata
Scott obviously didn't make this decision lightly. How often do you walk out on something you have 12k+ posts on, on this site alone. Enjoy the legacy, Scott. Hope you sell the miata's soon. |
1 Attachment(s)
Originally Posted by reddroptop
(Post 236334)
Calm down dude.
. |
How much for the wheels?
Kosei K1s 16x7.5 +38 205/45/16s |
say it aint so
|
Originally Posted by Jefe
(Post 236348)
How much for the wheels?
Kosei K1s 16x7.5 +38 205/45/16s |
Originally Posted by Jefe
(Post 236348)
How much for the wheels?
Kosei K1s 16x7.5 +38 205/45/16s dude, delete ur post, asap! :crx: |
Originally Posted by IcantDo55
(Post 236352)
:nono: Ban.
|
if you leave who's gonna help my dumb ass?
|
All times are GMT -4. The time now is 03:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands