FS: 1995 Turbo Miata w/ CF Hardtop (many parts available too)
 

Car is Sold

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Mods that can be had for additional fee: (most still brand new)
1. NEW Wolf Miata Alarm, Pwr Windows, Pwr Locks $500.00 (retail $750) [PICTURE]
2. NEW Defi Link Gauges and Controller (Boost, EGT, Oil Temp, Water Temp and Controller) 750.00 (retail $1000) [PICTURE]
3. NEW Alpine CDA-9847 Stereo, 2 8" Image Dynamics ID8 subs, 2 Rockford Fosgate (P200.2 and P325.2) Amplifiers, 2 6" door speakers $550.00 (retail about $750)[PICTURE 1] [PICTURE 2]
4a. NEW Tein Flex Coilovers w/ additional 8kg front rate springs Sold
4b. EDFC Controller including motors Sold
5. NEW in Box Carpet kit w/ mass backing (charcoal ultra plush cut pile from stockinteriors.com) 175.00 (retail $300)NO PICTURE SORRY]
6. NEW "Roadster" branded quality floor mats (black with blue lettering) $70.00 (retail $90)[PICTURE]
7. NEW DDM Stereo Surround (custom laser cut with cut-out for the Defi Link Controller) 80.00 (cost me 195.00)[PICTURE]
8. USED by me..949Racing Nickel 6UL lightweight Racing Wheels Sold
9. USED 3.909 Final Drive Ratio Sold
10. NEW Flying Miata Cam Gears 250.00 (Retail $300) [PICTURE] Pending Sale
11. Newly Powder Coated Valve Cover - Wrinkle Carbon Grey w/ Polish Letters (Cut to expose cam gears before coating) $125.00 (cost me 150.00 for the spare part and the coating) [PICTURE]
12. NEW Flying Miata Race Pipe (cat removal pipe) $125.00 (retail 175.00) [PICTURE 1] [PICTURE 2]
13. [TO YOUR SPECS] Coil On Plug setup. Sold
14. Autokonexian Fiberglass Vented Hood (unpainted, no gills) $275.00 (retail $380) [NO PICTURE, slight scratch but still unpainted so easy fix]
15a. NEW Gates Racing Timing Belt $65.00 (Retail $85.00) [PICTURE]Pending Sale
15b. NEW Gates Racing Water Pump and Alternator Belt $35.00 (Retail $50.00) [PICTURE]
15c. NEW Gates Racing Power steering without AC belt $35.00 (Retail $50.00) [PICTURE]
16. NEW Water Pump 94-95 $50.00 (Retail $70.00)[PICTURE]
17. NEW Coil Pack 94-95 #BPE8-18-10XA-9U $80.00 (Retail $110.00)[PICTURE]
18. NEW OEM NGK Blue Plug Wires Sold
19. NEW Oil Catch Can Kit Sold
20. NEW Magnaflow Catalytic Converter - as it was shipped to me.. no flanges??? $40.00 (Retail $60.00) [PICTURE]
21. NEW Beatrush PPF Rear Bar Sold
22. NEW Valve Cover Gasket (should probalby go with valve cover puchase but doesn't have to) $25.00 (Retail $40.00) [PICTURE]
23. NEW Spark Plugs Sold
23. Beginnings of a coolant Re-Route (includes JR Spacer, 1.6 thermostat cover, New OEM temp sensor (to mount into the spacer)) $45.00 (I paid about 70.00)
24. NEW Miata Workshop Manual for 1995 (still in plastic) $50.00 (Retail 100.00)

Now you're talking at $7K. Damn, that's a lot of parts with a free car attached to it. GL with the sale. Are the parts listed below available for sale now, or only after the car has sold?

I you don't sell it and decide to part it out; I call dibs on the Moss low pro lights.

The parts are available now yes... and if the "offer" is right, I'll even sell the Hard Top and then lower the price of the car. I'm fairly sure I'm going to end up parting it out, then probably sell the car of 3K or something like that.

It's priced very well to sell as a whole! Can't believe no one has jumped on it. Wish I was not having to spend all my money on mine right so I could afford it as it is! Join the two turbo Miata club. lol
GLWS!

how much for the top????

Bitch, you aint got money.

i have been saving artie. see you at the mob dinner later.

O yea I'm more interested in the FM cam gears too. and maybe the gates timing belt. you have those separately. so PM me and we can talk about those.

I'm sorry to see you part this car. I once pmed you and told you that apart from the color, I thought you had one of the most beautiful NA Miatas I'd seen.

I wish I could buy the car and import it. Local regulations prevent me from doing it.

I'll repeat my offer for the low pros. I'm more than willing to buy those.

Good luck with the sale.

BTW, I just sent FM an email this morning asking for a price quote for the Racing Beat Type II rear bumper to complete my bodykit. Let me know if you're willing to part with it and I'll buy it from you instead.

Main post updated with pics of the parts...

Thanks a ton Rafa, I'm pretty sad to see it go.. but my HOA isn't allowing anyone to work on their cars anymore, and I dont have a garage. So I've got a ton of things to do, and no where to do it. Plus with the new kid, it's just not gonna work out.

I was totally bummed grabbing pics of all the parts in storage. If I were able to put all these parts on the car, it would have been a really nice ride (more so than it is now). The fuel system with the dual feed fuel rail, and the Magnafuel FPR looks pretty trick too. Oh well, we'll see how it goes.

I'm probably not going to part out the bumpers since I dont have any originals or I'd definately take you up on your offer.

Thanks again.

I totally understand you. I'd be heartbroken myself. I'll pm you later about the wheels and tires you have on right now.

Shit; you don't know how much I hate not being able to buy that car from you!

FWIW, in my book you did a great job as a Miata owner. :bigtu:

Sorry man.

Can I buy the camera instead?

If I sell the top by itself, it will not be less than 1200.00. It uses OEM hardware on the inside, and then I have some nice chrome bolts with caps for the rear attachement.

dips on catch can if its complete, pm coming.

If this were march, 2007, I'd be on a plane right now. Awesome car and awesome price.

All I have a pending buyer on the car and they want the 6UL's so I'm working through that, so for now the wheels are off the market. Sorry all..

Good to hear. I'd rather see you not having to part this car out.

Superb miata with such great mods to back it up. GL on sale.

so they want the 6ULs and advans? if not I want the advans:)

I can talk to them to see if they'd want to do that... but if I sell the advans, it wont be cheap. Those suckers were expensive, not to mention the 4 month wait from Japan... eeesh

Not to mention I have these crazy, incredibly "bling", not incredibly functional lug-nuts holding them on haha
http://www.naroadster.com/forumlinks.../Advan1_sm.jpg

wow such a nice car at such a good price now, if only those 6uls were 15x9s !

also wished this wasnt across the country as most everyone says but good luck with the sale!

Without the lugnuts I'll save a fortune! Keep in touch with me and we can work something out.

payment sent for catch can. I put my austin address, so if you need more cash for shipping please notify me.

I got the payment, thanks. I'll get it out tomorrow, no worries on the extra pennies.

no special trips for me, the car is probably going to sit at BEGi for a while.

did the 6ul's disapear too?

Care to sell the EDFC separately?

Actually that I will do, I had a guy asking for the Tein without the EDFC, but wasn't sure I could sell the EDFC alone. But if you want just the EDFC I'm ok with that. How does $275.00 + shipping for the EDFC sound? This would be for both the controller and the 4 motors.

Oh and the 6UL's are still there, the other guy hasn't gotten back to me yet. If I dont hear from him tomorrow, I'll start taking offers for them again.

Do you have a receipt for the EDFC? The reason I ask is I got boned by Tein on the EDFC that's in my car now. They refuse to repair the controller even though it fried within the warranty period.

If you decide to part out the Wilwood Brake kit, Advan wheels, S2000 antennae, or the MOMO sterring wheel let me know with some prices; I'd be very interested.

I might have it, I usually keep my receipts but I'm a bit unorganized sooo.. :)

But I'll check.

I'll take it either way. Tein claims as long as they can verify where it was purchased the warranty should be good.

Why they used an inline fuse that won't blow an the power supply is beyond me :)

Do you take paypal? Could you calculate shipping to 20853?

haha... no problem...
Shipping to 20853 will be $13.00.

I will PM you my paypal address. I dont like posting emails on the web.

If I did not already have a white turbo miata,I would snatch this up real quick for that price,I would definately get one of my relatives down in L.A to pick this car up for me.

pschmidt, I got the payment for the EDFC. Give me a day or two to hunt down a good box to put them in and to see if I can find the receipt. I will do my best to get it out this week.

Thanks.


Slight Update
The COP setup that I am waiting on from Savington is ready to be made right now. But because it's not done yet, Sav said he is willing to make it to anyone's specific car. So it doesn't necessarily have to be a 95 Miata. So basically, you pay me the 200.00 and you get your COP setup shipped this year. I'll just have Sav ship it straight to you isntead of to me.

wheels...where are they?

Edit.. nevermind, you're talking about the Advans...

Well like I originally posted (before I edited this), I've not heard from the buyer and I'm going to give it another day for a firm committment. If I dont have a firm committment by then, I'm going to seriously consider parting this out. I'll probably make quite a bit more money that way anyways so... we'll see how it goes.

If you do end up parting out, depending on how far you want to break things down, I'd be interested in the FM intercooler kit (as long as it is the new design with silicone piping). Just throwing that out there.

belacyrf; I reiterate my offer. If you end up parting it out, I'd like to buy the low pros from you.

Rafa.. yup no worries.. if I part it out.. the low pro's are your (I Hope I have my stockers hehe)

As for the FM IC kit, I'm going to sell that with the whole turbo kit, so probably not going to part out that much.

Ok and understandable. Just was curious. However, if you find someone that doesn't want it with the turbo kit, I'm interested! :)

I'll take the 6ul's with rubber for the $700 listed price. I don't want that Advan shit. Everyone needs 2 sets of nickel 6ul's!

Ahhh ok cool... well like I said, if I dont hear from that guy soon, the 6UL's are available.

If you don't have your stockers; I'm willing to buy a set from ebay.

Cali is too far away from me to ship you mines! :giggle:

Hey man, can you give some details on the Advans, offset, rolled or pulled fenders, etc? Looks killer.

Good luck with your sale, if I didn't buy a Miata recently, I'd be all over this.

Bump for the advans :)

Did I miss something? If the Advans are for sale I am interested. How much you looking for? Also interested in the steering wheel and antennae.

Crap, I should have picked up the coolant reroute bits while I was at it.

If I end up parting out the car, here is what I'm basically looking at:
Turbo Kit w/hydra ECU $3500.00 (depending on the shape once I remove it) (Retail 5600.00)
CF Hard Top using OEM hardware and glass $1200.00 (Retail over 2K for everything)
Advan Wheels 16x8 +38 w/ 245/35/16 Toyo T1R tires $1100.00 (Retail $2100.00)
FM Dual Feed Fuel Rail w/ Magnaflow FPR and fuel lines $250.00 (Retail 400.00ish)

Everything else, will be decided once I pull it off, and check the conditions as they are all smaller ticket items. And whether or not I sell it will depend if I have the stock parts to replace it with.

The items aren't for sale yet, just wanted to throw the prices out there so people can really gauge whether they will be interested when the time comes or not. Thanks!

Oh and the Advans fit just fine on a 12.5F/R drop without any fender pulling and no rubbing.

Like I said.. I got the advans.

Offset?

Thank you

16x8 +38 ;)

belacyrf; that's a smart decision. It's time consuming but it will be well worth your time ;)

Trying to contact you.... but your PM box is full.

Yea I've cleared some room sorry

Also, kind of wierd nobody asked for engine shots like they seem to for everyone else.. I guess I have a trusting name or something haha.. but here are engine shots.
http://www.naroadster.com/forsale/engine1.jpg

http://www.naroadster.com/forsale/engine2.jpg

And a couple closer up of the fuel parts.
http://www.naroadster.com/forsale/engine3.jpg

http://www.naroadster.com/forsale/engine4.jpg

I think if I had the time to put the valve cover and the cam gears on this car, it would look really nice... oh well.

I like those blue lines ;)

^^^^^ Mmmmmm re-route :)

... ok for those who are waiting. The pending sale is stll on, so hang out a bit more. I have this pending sale, and I have one more guy in Oregon who is interested if this sale falls through. But those are the only two leads before I move to parting it out. Thanks

give me the wheels.

haha... sorry car is sold and the buyer took the car and both sets of wheels.

Good to know. Buyer = lucky bastard ;)

fuck!