FS: 2003 Turbo Miata
 

2003 Miata - ~75,000 miles (exact odometer reading by request.)

Mod list:
- Turbocharged
- 16g EVOIII Turbo
- TiAL 38mm WG
- 2.5 Stainless downpipe
- Hydra EMS
- 550cc Injectors
- AEM Wideband
- Autometer Boost Gauge
- FMIC (currently not installed, comes with all brackets, piping, couplers, etc)
- Turbo XS RFL BOV
- Koyo 37mm Radiator
- Upgraded Main Fan
- Competition Clutch 6 Puck Street Clutch, Awesome drivability for a 6 puck

Stock parts
- LSD
- PW/PDL/Keyless Entry/Power Mirrors
- AC
- Fog Lights

Wife overheated car, blew headgasket. I replaced the engine with a low mile (5,xxx miles) engine from a 05. At the same time, I replaced the radiator, all hoses, coolant, plugs, clutch, resurfaced flywheel, tranny fluid, turret oil, etc.

FMIC is currently off the car, and I'm running it non-intercooled. All parts are included.

Car has 4 brand new tires with ~500 miles on them.

Car has no exhaust, running open downpipe. I will split the cost of $299 3" Catback from BGM for asking price..

I've spent over $2500 on the car in the last 2 months, not including the engine.

I will sell it all for $12000.

I am open to offers. I have the stock ECU and Injectors and will knock $1100 off the price of the car if you do not want the Hydra and Injectors. You will need some sort of engine management, but it could be a used emanage, etc.


Additionally, I would take 10,000 for the car without the Hydra or the 550 injectors. I would plug the stock ecu back in and re-install the stock injectors prior to pick up.

Feel free to call me at 502.815.0351 or pm me here.

Additionally, if someone gives me full asking price, I will throw in all the spare engine parts I have, including the head, short block (still assembled) extra flywheel, extra stock clutch, MAF, IAT, etc.

how much for the ZPI kit?

I would sell the kit for like $1800 OBO..

- Stainless Manifold, flanged for a mitsu housing and a 38mm WG
- Stainless Downpipe with WG routed in
- EVOIII 16G GT Turbo
- TiAL 38mm External Gate
- Stainless supply line and all fittings,
- Oil Drain Flange, fittings and line
- all piping
- FMIC with brackets
- Additional piping and coupler for non-i/c setup.

any pictures?

I also had the turbine housing and exhaust manifold ceramic coated black recently, so it looks all baller.

I will sell the kit with the hydra and the injectors for 2500. This is a smokin deal. Act now, etc.

Can you email me at Autococker07@yahoo.com also cc james.butterworth@hurlburt.af.mil so I can respond from work? Calling is cool too (318)-230-1550 (between 8am-4pm call work (850)-881-2788.) I have been wanting a hydra based system, and this sounds to good to be true! Thanks Jim