Feedback
 

We sold a few sets already, and id like for anyone that has purchased a set, after installation and tune to give me feedback on how its going, be it positive or negative. We are constantly improving our products and what our customers think is important to us.
Thanks!
Mark

I have bought 2 sets of injectors from you for customers and have had no complaints. I am sure I will buy again.

good glad to hear

Are you interested in setting up a vendor account?

Just received my set of 800's this morning and will be tuning this coming Friday! I'll be sure to let you know how they work out for me. Speedy shipping and awesome customer service, thanks again ;)

Great! Thanks for the initial feedback. Let us know how the install and tuning goes.

The work and fit great, + 5mpg and ~170hp.

Hello,

Do you have general Dead Time settings for the 1000cc injectors? I'm running pig rich using the settings I was provided, and that's with my map bottomed out.

I am also running annoyingly rich at idle with my DW1000cc injectors and have my fuel map about as low as it can go.

For anything tech related, feel free to shoot us an email or use the support page on our website >

techsupport@deatschwerks.com

http://www.deatschwerks.com/resource...support-ticket

...and to answer your question here:

Please see the values listed below. They are in millisecs @ 1v increments:

3.3 - 7v
2.6
2.2
2.0
1.8
1.6 - 12v
1.5
1.4
1.3
1.2
1.1 - 17v

Please note, these values are taken in a lab setting using a oscilloscope and direct trigger with a simulated 3 bar fuel pressure. These values will need some tweaking to get the injectors dialed in to your chassis, but they should give your tuner a good starting point.

Let me know if you have further questions.

Dropped in the DW200 pump yesterday. Holds 40psi at WOT like it should. Very digital sounding, and makes half the noise the Walbro255 did.