Only thing I would consder is the intercooler and piping kit IF it comes with 3ply silicone couplers and T bolt style clamps. That might go for $200 ish on ebay so if you can get it for closer to $100 I'd go for it.
If the greddy is real that'e a good BOV but chances are its a china rep. |
Originally Posted by cyotani
(Post 1202994)
Only thing I would consder is the intercooler and piping kit IF it comes with 3ply silicone couplers and T bolt style clamps. That might go for $200 ish on ebay so if you can get it for closer to $100 I'd go for it.
If the greddy is real that'e a good BOV but chances are its a china rep. |
I just noticed your user name.
Are you the result of what was supposed to be a jawstain? now I get it. |
Originally Posted by 18psi
(Post 1203002)
I just noticed your user name.
Are you the result of what was supposed to be a jawstain? now I get it. |
Originally Posted by jawstain
(Post 1203005)
Aren't we all the result of a failed jawstain? :fawk:
|
Originally Posted by 18psi
(Post 1203009)
Believe it or not, some of us are intentional.
Back on topic, this guy won't part out his kit so I'm just gonna listen to your guys advice and walk away. I'll just save some more money up and just do it right. Thanks for the replies fellas. |
:laugh:
Ok, I'll give you some actual advice: stay away from classified ads until you know what you want, why you want it, and what it does. You're really not in any position to be shopping for parts yet. Like, at all. Unless you are dead set on making really stupid mistakes and wasting a ton of money and time. |
Originally Posted by 18psi
(Post 1203017)
:laugh:
Ok, I'll give you some actual advice: stay away from classified ads until you know what you want, why you want it, and what it does. You're really not in any position to be shopping for parts yet. Like, at all. Unless you are dead set on making really stupid mistakes and wasting a ton of money and time. |
There are certain threads around here called "stickys." Read all of them. Then find one called DIY FAQ and read that. Then read two or three dozen "build threads" (yes, that many) to see what works and what doesn't for these cars. Then emulate a build thread that worked, or make a hybrid of a couple that worked out well.
But first, go to the "meet and greet" section and make an intro thread before somebody bans you for not following protocol. |
Originally Posted by cyotani
(Post 1202994)
Only thing I would consder is the intercooler and piping kit IF it comes with 3ply silicone couplers and T bolt style clamps. That might go for $200 ish on ebay so if you can get it for closer to $100 I'd go for it.
If the greddy is real that'e a good BOV but chances are its a china rep. The BOV that looks like a Greddy but has really terrible HKS logo cast into it? Probably China. :giggle: |
Originally Posted by sixshooter
(Post 1203022)
There are certain threads around here called "stickys." Read all of them. Then find one called DIY FAQ and read that. Then read two or three dozen "build threads" (yes, that many) to see what works and what doesn't for these cars. Then emulate a build thread that worked, or make a hybrid of a couple that worked out well.
But first, go to the "meet and greet" section and make an intro thread before somebody bans you for not following protocol. |
Man, you guys are being so nice today. I expected carnage, and I find reasonable advice instead.
|
Originally Posted by cyotani
(Post 1202963)
He actually has 2 manifolds shown. The ebay Taco and the s4 looking one. the s4 one is external wastegate so you would need that along with down pipe. If the turbo has an internal gate you can run the taco taco and buy and ebay DP.
As for is it worth it. I'd say do it once and do it right the first time. I'd see if you can buy some pieces off it such as the intercooler piping kit, intcooler, oil feed/return and other nick nacks then either troll sell threads for a used BEGI/FM kit or get the FM ala cart parts. |
All times are GMT -4. The time now is 03:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands