Did you not have it milled the first time, like everyone told you too?
|
Originally Posted by ravinaziankid
(Post 1398026)
So just ask the shop to shave off as little as possible but make it all even. Thanks for that tip.
|
Originally Posted by bahurd
(Post 1398040)
And make sure you use ALL the studs like other members told you. Otherwise, you'll just have another leak.
|
I dropped it off at the machine shop, it was really off they said, something like 60 thousandths or whatever measurement they use so its going to cost a lot but hopefully it'll be good after.
|
Originally Posted by ravinaziankid
(Post 1398454)
I dropped it off at the machine shop, it was really off they said, something like 60 thousandths or whatever measurement they use so its going to cost a lot but hopefully it'll be good after.
|
Originally Posted by ridethecliche
(Post 1398499)
Would buying a taco taco have been cheaper?
It ended up costing 75 for the milling, i installed it and already noticed after bolting it down that there were no gaps or leaks. I was so happy to finally have it not leaking and was able to actually hear the turbo spool and bov. |
All times are GMT -4. The time now is 07:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands