1.8 NB ID Injectors Installation - Question
I'm about to install my brand new ID 1050x injectors, which I bought specifically for a 90-05' miata with 11mm blue adapters and -204 lower cushions. Do I install these as is? Or do I need to add an o-ring of sorts?
Thanks, I just want to make sure they fit nicely with the stock rail and don't leak https://cimg4.ibsrv.net/gimg/www.mia...ce3a73f5b1.jpg |
Looking good
|
I installed mine with as-is out of the box and haven't had any leaks.
|
As-is. As a warning however, the connector will be very close to the head, I've found shaving the side of the mating connector with a sander helps tremendously. It won't fit while sticking straight out, you need to rotate it to the left or right, which differs depending on the cylinder IIRC.
|
Originally Posted by curly
(Post 1630525)
As-is. As a warning however, the connector will be very close to the head, I've found shaving the side of the mating connector with a sander helps tremendously. It won't fit while sticking straight out, you need to rotate it to the left or right, which differs depending on the cylinder IIRC.
|
Originally Posted by rwyatt365
(Post 1630518)
I installed mine with as-is out of the box and haven't had any leaks.
|
Originally Posted by der_vierte
(Post 1630517)
Looking good
|
All times are GMT -4. The time now is 01:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands