2JZ mani stud question
4 Attachment(s)
Hey guys,
I only ask you guys because I trust this community will know best of all of the communities I am involved with. I have an RZ here destined for 1000whp and At this stage I just have to bolt it together for the guy and fab his IC and intake pipework. Long story short the only real question I have is regarding the manifold to turbo studs. Neither the manifold(ebay, repaired eleventy times) nor the turbo(GTX42r) have threads, both are drilled at 11mm (approx). I have metal gaskets supplied. This is intended to run at 800whp on this first setup for a few passes until the manifold fails again and then along with a full motor build a new manifold will be made for it. So the question is basically, with a turbo this big and heavy do I just use 10x1.5mm grade 12.9 Bolts or do I tap the manifold and run inconel... or what? Thanks heaps, sorry its not a miata, here are some pics https://www.miataturbo.net/attachmen...ine=1379836184 https://www.miataturbo.net/attachmen...ine=1379836184 https://www.miataturbo.net/attachmen...ine=1379836184 https://www.miataturbo.net/attachmen...ine=1379836184 Dann |
All times are GMT -4. The time now is 10:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands