Stevey

Hi , Im running a 1.6 with Flyin miata manifold and downpipe with a t25 of a nissan 200sx , with 1.8 injectors and a sytec rising rate fuel pressure regulator and a Custom Intercooler , Its not running any mapping setup but just the Fuel pressure regulator set to 65psi with the pipe off ,

Now the fault is when boost comes on its runs around 11-12 afr upto 3000rpm (roughly) then it will rise up to 15-17 afr and i usaully let off at this point ,

Ive tried changing the fuel pump for a mazda cosmo one another MAF (second hand) , and the injectors from the 1.6 to the 1.8 and the fuel filter has been changed which did make a small difference but nothing major

Im out of ideas any help would be great

pdexta

iTrader: (17)

That's right around the point that you're really starting to build boost. It doesn't sound like the FPR is working right or you're running more boost than it can support. Have you verified fuel pressure? What kind of PSI are you seeing at those AFR's? Be careful with it until you get it figured out.

FRT_Fun

iTrader: (19)

You need: MS + Injectors.

Ditch the AIDS

nickblackbelt

iTrader: (5)

i would like to know more....IN for more info

triple88a

iTrader: (2)

If you want to know more, go here
https://www.miataturbo.net/megasquirt-18/

Stevey

Ive tried to different fuel pressure regulator and the same happens , I want a MS but im skint atm ,

Ive tried everything now and im thinking it must be a sensor or something now

olderguy

iTrader: (19)

O2 clamp? Sounds like your ECU is shutting down the fuel. Your location?