Almost there! :)
hey guys.. i was going to install my turbo and everything last night when i noticed that the bolts i had for my turbo manifold were rusted :vash: i was going to use them anyways.. but my "friends" had to beat me to the ground to stop me haha. my question to you guys is this.. where is a good place to buy the bolts for the manifold? i remember my friends telling me i need bolts that exceed grade 8 or something like that. it would be great if you guys gave me the bolt/thread size too. sorry for being such a newb :slap:
thanks! |
anybody? :( i just need the bolt size and the thread (pitch?) size and someplace to buy them from. thanks
|
my local ACE hardware sells automotive studs, that's what I used
|
i have grade 8 bicyle allen bolts.
|
I don't think grade 8s(or at least the metric equivalent) are really necessary for a manifold... it's not like it's an incredably high load point.
|
I use Stainless studs and Stainless acorn nuts. Never had a problem.
-Michael- |
Whaddya mean bolts? Do you mean "Studs"... the short rod threaded on both ends that screw into the manifold, but hold the turbine housing to the manifold with nuts?
You've gotta know the thread pattern... my Begi uses M8x1.25 and my Garrett turbine housing also had that size. I called Begi and Stephanie sent me a dozen for about $10. |
Originally Posted by m2cupcar
(Post 77413)
my local ACE hardware sells automotive studs, that's what I used
+1, even some of my manifold to block & turbine to DP studs are from ACE. |
Originally Posted by samnavy
(Post 77448)
Whaddya mean bolts? Do you mean "Studs"... the short rod threaded on both ends that screw into the manifold, but hold the turbine housing to the manifold with nuts?
You've gotta know the thread pattern... my Begi uses M8x1.25 and my Garrett turbine housing also had that size. I called Begi and Stephanie sent me a dozen for about $10. |
You want metric 10.9, metric 8.8 can break after repeated heat cycles. And a dozen for $10 bucks is an amazing price.
|
I'm pretty sure it was around there... maybe $15... but if you're Begi and buy them in boxes of 1000, and are as awesome with customer support as they are, and the guy calling just spent $750 on a mani and DP, they get cheaper.
|
thanks for your input!
i have an iron cast replica of the greddy turbo manifold.. would that use the same bolt size as the begi? |
oh and im talking about the bolts for the manifold to the block..
|
anybody? :(
|
Thanks Braineak.. ill go try out the sizes you told me....
Anybody else have any inputs? :) |
are you in san diego? if so marshals hardware has the best selection of EVERYTHING metric, everything.
|
All times are GMT -4. The time now is 07:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands