Am I missing anything?
 

I'm collecting parts to do my diy turob setup on my 1.6. My power goals are ~160-170hp at the flywheel So far I have:
megasquirt
1.8 injectors from 94
TDO4L from WRX
Exhaust flange
turbo inlet and outlet flange
a bunch of tubing to make manifold, dp
innovate lc1
intercooler
Boost guage
Toyota COP's

I've already put a torsen in the rear. A clutch and flywheel are on the to do list.
I'm hoping I can get away with a stock rad since it's an autox only car and doesn't see any street driving.
I'm open to any suggestions people have

Am I missing anything major?

Nothing major...but minor stuff like oil drain and feed lines.

BOV?

mabe some 305 supra injectors instead of the 1.8's

Maybe it was implied with the megasquirt, but an Intake air temp sensor.

Good to hear you are trying to make nationals again. What tour were you thinking of doing?

Intercooler piping and couplers, oil/coolant feed/returns, supporting mods such as clutch and radiator.

Megasquirt with IAT and maybe eBC
Begi manifold/downpipe
that GT2554 thats on here for 400
Supra 305s or rx7 460s
boost gauge
LC1 or UEGO
EBAY IC and IC piping

Cops would be cool, but not necessary

THanks for the quick feedback. I will be adding an IAT.

Chris, I am hoing to do the peru tour and possibly seneca. Nats are pretty much for sure (I just haven't decided if I want to run ES, STS, CSP or XP ;) )

Looks like we won't see you until Nats then. Good luck with the build.