any pics of what an oil feed adapter looks like on our cars?
I'm new to the miata thing, and can't find an extra oil feed port.
|
What year is your car? An oil feed for the turbo yes?
You may already have it covered;) If not, this is an oil feed adapter.. http://tunertoys.zoovy.com/product/OTODK |
Originally Posted by UofACATS
What year is your car? An oil feed for the turbo yes?
You may already have it covered;) If not, this is an oil feed adapter.. http://tunertoys.zoovy.com/product/OTODK thats what I wanted. thanks. |
The port most GReddy users (and me) use is down at the lower rear driver's side of the block. It is not a 1/8BPT thread either, it's 10mm x 1.0 or something like that, straight thread. I have it written down somewhere. I used an easily available Banjo-fitting to go to a #4AN line.
Maybe you could use this type of Honda fitting where the Miata oil pressure sender goes, i never took that out so I don't know what the threads are. |
That honda piece linked above would work. The stock oil pressure sender is a 1/8 BST (British Standard Taper). Luckily my escort block has the extra oil feed under the exhaust many so this won't be needed :)
|
Originally Posted by TurboTim
The port most GReddy users (and me) use is down at the lower rear driver's side of the block. It is not a 1/8BPT thread either, it's 10mm x 1.0 or something like that, straight thread.
|
All times are GMT -4. The time now is 04:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands