Beaded and Powdercoated Pipes
4 Attachment(s)
I had a problem last summer with my intercooler pipes blowing off at 14psi, so I had my pipes beaded this past week. While my intercooler pipes were off the car, I also had them powercoated. They turned out great besides the fucking overspray! I can't believe a powdercoating company can send out a job with silver overspray on black pipes. The powdercoating was done as a favor so I guess I can't be too upset. I just wish they were done right the first time so I don't have to take them off my car again.
|
Is it silver over spray or missing coat?
|
It's definitely sliver overspray. It's so obvious I don't know how the packager missed it. Very poor quality control on their part.
|
Maybe it's just silver fleck? ;)
Nice pipes, though. -meaty |
i think of all the times this phrase is used, now may be the one right time:
that'll buff out. |
Indeed. A clay bar will make short work of that overspray. :)
|
the pipe is going to be dirty soon not to mention you cant even see it when its on the car. Seeing as it was a favor, id be happy!
|
I kinda like the silver spec look....
|
My powercoat is indestructable. Wether you clay/buff/paint thinner them I doubt you will hurt the coating any.
Great looking pipes though. |
they look awesome john, is that powdercoater local? i've got a valve cover i spent about 10 minutes starting to polish and gave up, i'm gonna powdercoat it
|
Originally Posted by y8s
(Post 231995)
i think of all the times this phrase is used, now may be the one right time:
that'll buff out. |
Originally Posted by Mach929
(Post 232079)
they look awesome john, is that powdercoater local? i've got a valve cover i spent about 10 minutes starting to polish and gave up, i'm gonna powdercoat it
|
Originally Posted by Stripes
(Post 232130)
I used a company in Quakertown. I'll get the name of the place if you're interested. I think it's a $150 minimum to start. After that, it's very affordable.
|
Originally Posted by stripes
(Post 232130)
i Used A Company In Quakertown. I'll Get The Name Of The Place If You're Interested. I Think It's A $150 Minimum To Start. After That, It's Very Affordable.
|
If it was done as a favor, quit bitching.
Also, for beading, I prefer the ghetto "run a weld bead around the pipe and call it a day". Much cheaper. If you have a welder. :) |
this thread is old and moldy....
|
Where is the bathroom?
|
All times are GMT -4. The time now is 07:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands