Bigger injectors on stock '96 ECU?
I know you 1.6 guys can mess with the clockspring in your AFM's to run bigger injectors, has anyone tried running bigger injectors on stock 1.8 ecu's, specifically OBDII?
I read somewhere, probably here, that the OBDII ecu should be able to compensate better, but how big could I go and still idle? |
300s should work with a safc i ran 460s for a while but driveability sucked.
|
I couldn't even run 300's on the stock ecu? I thought I'd at least be able to do that much. I'm just planning ahead, I'd like to be at 10-12 psi some day. I have a BEGi AFPR and Walbro 190HP, so I'll be upping the pressure on whatevr I end up with.
|
If you own the 300's try them. No big deal to switch them out and see if the ECU can bring the AFR down to a good idle.
|
I think you'd be fine. 300 is just over 10% bigger than stock... which barely flows more than stock at idle. 269 cc/min vs 238 cc/min at idle pressure
|
I'm thinking it'll be ok. could be slightly more rich at idle, but im going to go with not much.
|
How about if I add an electric supercharger to lean it out a little?:noes:
|
now you're cruisin' for a bruisin'
|
Originally Posted by braineack
(Post 65752)
now you're cruisin' for a bruisin'
|
i like to keep it real.
|
All times are GMT -4. The time now is 03:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands