TD04H turbo on a 1.8?
03-07-2007, 10:21 AM
#1
Newb
Thread Starter
Join Date: Jun 2005
Posts: 12
Total Cats: 0
TD04H turbo on a 1.8?
I have a greddy kit that was on my 1.6 and want to switch it over my 1993 with a 1.8 motor. The turbo is a TD04H. I have two questions. Is the turbo big enough to get to around 220 hp without too hot of an intake tempeture.
And does anyone make a manifold to fit the 1.8 and the TD04H turbo?
FYI my current setup has:
Blue Emanage
Walbro fuel pump
starion IC
Vetech fuel presure regulator
ect.
Ataim
And does anyone make a manifold to fit the 1.8 and the TD04H turbo?
FYI my current setup has:
Blue Emanage
Walbro fuel pump
starion IC
Vetech fuel presure regulator
ect.
Ataim
Reply
0
0
03-07-2007, 01:23 PM
#4
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,488
Total Cats: 4,077
the turbo will make 220rwhp on 1.8 at 12-15psi.
the main thing is the placement of the turbo, as the block in longer, and they don't both sit in the eact same spot. the reason I recommend the hks manifold is that the turbine flange is horizontal like the greddy, so the only modification may only be extending the DP, but you wont need to rotate the flange and reweld it all.
the main thing is the placement of the turbo, as the block in longer, and they don't both sit in the eact same spot. the reason I recommend the hks manifold is that the turbine flange is horizontal like the greddy, so the only modification may only be extending the DP, but you wont need to rotate the flange and reweld it all.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
