da Bajan

With a GT2560R, 2.5" exaust, 550 injectors, cross-over pipe, Link management and running 6 PSI, what kind of HP and tourque numbers should I be getting?

Just generally I mean.

Thanks

DB

TheBandit

iTrader: (8)

185whp ish I would imagine. I made 165whp from my JRSC at 6psi with EM. That turbo is most certainly more efficient than that damn M45. You could certainly expect more (220+) with an IC and more boost.
-Michael-

Al Hounos

About 150-165whp I'd guess. Do you have a GT2560R or a GT25R?

da Bajan

Its a GT2560R

DB

magnamx-5

iTrader: (7)

get some WI or an IC and 300 hp would be in range but not at 6 psi maybe more like 13-14

da Bajan

Working on an Interecooler setup now... other thread!

Once I get that in place I will be running 10 - 15 PSI, probably a bit lower as I am still on the stock clutch. When I get the new clutch then 12 - 15 for sure!

DB

Markp

I'll guess 175 RWHP/170 ft/lbs torque.

Mark

Fritch

I did 175rwhp with a GT2560R, no IC, at 6psi on my 99 with piggyback fm voodoo box.

da Bajan

Cool. Then I guess the info I am getting from DLL is either dead wrong or I have a LOT of tuneing to do!

Probably the tune eh?

DB

F20turbo

175whp 165 ft/lb @ 6psi. 240whp 225ft/lb @ 12psi.

da Bajan

Nice! Man, I have to get to tuning to get this thing working better... well load of work coming up over the next week, so no tuning till after that.

DB

Markp

Ya, I believe that a 97 with 2 PSI more boost should be in about the same ballpark.

Mark