COP Success!
I've had the parts for I dunno...2-3 months or so but I finally got around to installing them today. Went to a local miata guy and picked up a spare set of coils to use the connector. Cutting through that epoxy is a pain in the ass. After I soldered the wires to the old coil connectors, I re-epoxied. Wires going to the coil connectors are expoxied as well.
Took about 3hrs to get everything wired up nice. Still havent fabbed a hold-down for it but that should take all of 20 minutes. Started right up on the first crank! I guess the F/IC doesnt seem to mind them at all. Havent gone for a real "ride" yet b/c the COP's would probably jump around too much and freak me out. Thanks Braineack for the write-up. :cool: |
Ill be the first to say "Congrats man!"
I want to do COPs soon |
I need to watch ebay and get me a set especially now since I got the turbo in.
|
quick pic:
underside of the "bracket" has dense foam stuff. I welded a 14mm bolt to the top of the 10mm valve cover bolt, fastened on the "bracket" with a 14mm bolt and a rubber bushing :) http://img255.imageshack.us/img255/5...57largerk9.jpg |
All times are GMT -4. The time now is 04:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands