Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   Custom downpipe sizing (https://www.miataturbo.net/diy-turbo-discussion-14/custom-downpipe-sizing-29260/)

FastG 12-15-2008 10:35 AM

Custom downpipe sizing
 
I am planning on having TurboTony make me a custom downpipe for my CarTech/IHI setup. My question is what size should I pick. Is there some sort of formula for pipe size, is there a relationship between the output hole in the turbo housing and the downpipe diameter. Should they be equal? Larger? Can it be to big?

Thanks

Graham

Splitime 12-15-2008 10:43 AM

I go by the idea that Bigger is Better on turbo setups.

Not sure how far you are from South Holland, IL... but I have a buddy down there that can make you a custom DP also. He did the fabwork on my setup.
Does TT have the stuff templated for your specific setup?

FastG 12-15-2008 10:46 AM

TT does not have a template, so I am planning on shipping him my current downpipe. The current one uses the stock mid pipe, so it must be very restrictive.

Fastg

Splitime 12-15-2008 10:53 AM

Easy enough, if you do want to keep it local and have it done to exact fitment with no questions the first try... I can pass you onto my friend. Does great work for great prices.

And for size... I like 3" as the ideal fit/cost compromise.

FastG 12-15-2008 11:05 AM

This is a real small turbo, do you think 3" is worth the extra cost of the rest of the system. I was thinking 2.5"

Sure send me your guys info.

Fastg

dynokiller90 12-15-2008 08:46 PM


Originally Posted by FastG (Post 341522)
This is a real small turbo, do you think 3" is worth the extra cost of the rest of the system. I was thinking 2.5"

Sure send me your guys info.

Fastg

yes.

start with turbine outlet size and then step up to 3" as soon as you can. the exhaust gasses are still expanding as they are enter the downpipe so give them some room.

FastG 12-15-2008 08:57 PM

The small outlet on the IHI turbo is just 2" so is it still important to go with 3"?

Fastg

dynokiller90 12-15-2008 09:13 PM

the actual outlet of my 16g is also only about 2" as well and yes it makes a difference. most notably in spool time. I also picked up about 20 free hp by switching to a 3" exhaust after the dp. although it may be diffucult to get to 3" at the flange it does have some benifit to go big as soon as you can. it's not a must but it is better.

fluke 01-13-2009 09:14 AM

I went w/ a 2.5" DP (same for rest of exhaust) for my 16g, couldn't tell you if 3" is superior, but it was tricky enough getting a 2.5" pipe routed. I'd do it again, I'm hitting 12psi pretty quick.

Saml01 01-13-2009 09:52 AM

Dont bother with 3 inch. On a setup like yours its just extra money and headache.


All times are GMT -4. The time now is 09:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands